• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.337-350
• /
• 2014

Internet-of-Things(IoT) is the computing paradigm converged with different technologies, where diverse devices are connected via the wireless network, acquire environmental information from their equipped sensors, and are actuated. IoT applications provide smart services to users by interacting with multiple devices connected to the network. IoT devices provide the simple set of the information and also offer smart services by collaborating with other devices. That is, IoT applications always interact with IoT devices which are becoming very popular at a fast pace. However, due to this fact, developing IoT application results in unconventional technical challenges which have not been observed in typical software applications. Moreover, since IoT computing has its own characteristics which are distinguished from other former paradigms such as embedded computing and mobile computing, IoT applications also reveal their own technical challenges. Therefore, we analyze technical challenges occurring in developing IoT applications and present effective solutions to overcome the challenges. To verify identified issues and presented solutions, we present the result of performing a case study of developing an IoT application. Through the case study, we verify how the unconventional technical issues are raised in a real domain and analyze effectiveness of applying the solutions to the application.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.209-218
• /
• 2021

Studies of pore structure in shale gas reservoirs are essential to increase recovery rates, which is in the spotlight concerning unconventional resources. In this study, the distribution of pores in shale gas reservoir sample were observed using Scanning Electron Microscope Particle Analysis (SELPA), which is appropriate to analyze the distribution of particle or shape for sample in large area. A sample from the A-068 borehole drilled in the Liard Basin was analyzed; calcite is the main mineral. The pore size ranges from tens of nanometers to hundreds of micrometers and the contribution of each pore size to overall sample porosity was determined using SELPA. The distribution of pores was determined by observing the surface in the same area at magnifications of ×1000, ×3000 and ×5000. Pores less than 100 nm were observed at high magnifications and confirm that small-scale pore distribution can be analyzed and identified rapidly using SELPA. The method introduced in this study will be useful to understand pore structures in unconventional reservoirs.

• Journal of the Korean Professional Engineers Association
• /
• v.45 no.4
• /
• pp.30-34
• /
• 2012

Shale gas is one of the resources which require lots of new technologies for commercial production and has the most reserves among unconventional gas resources for commercial production at present. Especially, the growth of shale gas industry means the significant changes of paradigm and the development of shale gas is very different from conventional gas development in terms of geology, rock mechanics, petroleum engineering, development and production engineering. In this manner, shale gas may hold the key to expanding the long-term role of gas in the global energy mix.

• Molecules and Cells
• /
• v.41 no.1
• /
• pp.50-54
• /
• 2018

Atg5 and Atg7 have long been considered as essential molecules for autophagy. However, we found that cells lacking these molecules still form autophagic vacuoles and perform autophagic protein degradation when subjected to certain stressors. During this unconventional autophagy pathway, autophagosomes appeared to be generated in a Rab9-dependent manner by the fusion of vesicles derived from the trans-Golgi and late endosomes. Therefore, mammalian autophagy can occur via at least two different pathways; the Atg5/Atg7-dependent conventional pathway and an Atg5/Atg7-independent alternative pathway.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.216-224
• /
• 1986

This paper treats the modelling and the control of the burnthrough point control system for an industrial sintering process. First, a state-space model is derived by defining new unconventional variables. A simple control law is proposed, which consists of the modified receding horizon control law and the least-squares prediction algorithm. The stability and the tracking properties of this control law are proved. The real-time experiments are carried out in a POSCO sintering plant and satisfactory results are presented in this paper. Before the real-time experiments, computer simulations are done and their results are also given for the comparison with the real-time experiments.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.971-984
• /
• 2002

The multichannel quantum defect theory (MQDT) is reformulated into the form of the configuration mixing (CM) method using the geometrical construction of the S matrix developed for the system involving two open and one closed channels. The reformulation is done by the phase renormalization method of Giusti-Suzor and Fano. The rather unconventional short-range reactance matrix K whose diagonal elements are not zero is obtained though the Lu-Fano plot becomes symmetrical. The reformulation of MQDT yields the partial cross section formulas analogous to Fano's resonance formula, which has not easily been available in other's work.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.4
• /
• pp.201-208
• /
• 2007

Polychlorinated biphenyls (PCBs) are anthropogenic contaminants found globally in water, ice, soil, air and sediment. Modern analytical techniques allow us to determine these chemicals in environmental matrices at parts per trillion levels or lower. Environmental forensic on PCBs opens up new avenues of investigation such as transport and fate of water masses in oceans, sedimentation, onset of primary production, migration of marine mammals, their population distribution and pharmacokinetics of drugs inside organisms. By virtue of persistence, bioaccumulation, bioconcentration and structure-activity relationship PCBs emerge as unconventional chemical tracers of new sort.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.33-34
• /
• 2011

• The Journal of Art Theory & Practice
• /
• no.15
• /
• pp.31-49
• /
• 2013

This paper delves into the recent 'paintings' of African-American artist David Hammons, which combine rubbish-like plastic wraps with the abstract-expressionist style paintings. In straddling between rubbish and art object, his works tend to blur the boundary drawn between two opposite categories in value, art and garbage, provoking the sophisticated taste of Upper-East-side white community in Manhattan, New York. Choosing the venue of his exhibition at a commercial gallery, Hammons's creative efforts is also a critique of what can be seen as the dominance of abstract expressionism and white elitism in American art history. The artist is known for his use of unconventional materials in art making such as black hair, barbecue bones, and elephant droppings, ones that are often associated with African-American experiences in all different levels. Since his debut in the art scene in the 1970s, Hammons has pursued the view of art-making as a medium for provoking contentious issues of racial relations in the States. On the other hand, the reception of Hammons's work as African-American art can be potentially quite limiting, overlooking as it does multi-faceted meanings of his art practice. His unconventional approach to art often took him outside art galleries and museums, where he was seen using a variety of common materials for site-specific installations and performances. Staged in different parts of Manhattan, these acts of art making traverse seemingly opposite communities and cultures, often blurring their boundaries. Hammons's artistic practice can label him what Abdul Jan Mohamed calls "specular border intellectual", revealing as it does the symbiosis of binary oppositions that is basic to the experience of communnal living.

• Wind and Structures
• /
• v.26 no.2
• /
• pp.99-114
• /
• 2018

Due to shortage of land and architectural aesthetics, sometimes the buildings are constructed as unconventional in plan. The wind force acts differently according to the plan shape of the building. So, it is of utter importance to study wind force or, more specifically wind pressure on an unconventional plan shaped tall building. To address this issue, this paper demonstrates a comprehensive study on mean pressure coefficient of 'E' plan shaped tall building. This study has been carried out experimentally and numerically by wind tunnel test and computational fluid dynamics (CFD) simulation respectively. Mean wind pressures on all the faces of the building are predicted using wind tunnel test and CFD simulation varying wind incidence angles from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. The accuracy of the numerically predicted results are measured by comparing results predicted by CFD with experimental results and it seems to have a good agreement with wind tunnel results. Besides wind pressures, wind flow patterns are also obtained by CFD for all the wind incidence angles. These flow patterns predict the behavior of pressure variation on the different faces of the building. For better comparison of the results, pressure contours on all the faces are also predicted by both the methods. Finally, polynomial expressions as the sine and cosine function of wind angle are proposed for obtaining mean wind pressure coefficient on all the faces using Fourier series expansion. The accuracy of the fitted expansions are measured by sum square error, $R^2$ value and root mean square error.