• 제목/요약/키워드: ultrasonic property

검색결과 177건 처리시간 0.03초

휴대용 의료 초음파 프로브 적용을 위한 압전체 제조 및 특성 (Modified Piezoelectric Ceramics for Portable Ultrasonic Medical Probe Application)

  • 강동헌;채미나;홍세원
    • 한국전기전자재료학회논문지
    • /
    • 제29권8호
    • /
    • pp.483-488
    • /
    • 2016
  • Ultrasound imaging by using piezoelectric materials, such as lead zirconium titanate (PZT) has been one of the most preferred modes of imaging in the medical field due to its simple, low cost and non-ionizing radiation in comparison to other imaging techniques. Recently, the market demand for portable ultrasound is becoming larger with applications in developing countries, disaster area, military, and emergency purposes. However, most of ultrasound probes used is bulky and high power consumable, so unsuitable for such applications. In this study, the 3 layered ceramic specimen consisted of 128 pitches of $420{\mu}m$ in width and $450{\mu}m$ in thickness were prepared by using the Ti-rich PZT compositions co-fired at $1,050^{\circ}C$. Their electrical and ultrasound pulse-echo properties were investigated and compared to the single layer specimen. The 3 layered ultrasound probe showed 1.584 V of Vp-p, which is 3.2 times higher than single layered one, implying that it would allow effectively such a portable ultrasound probe system. The result were discussed in terms of higher capacitance, lower impedance and higher dielectric coefficient of the 3 layered ultrasound probe.

Effects of Organoclay on the Thermal Insulating Properties of Rigid Polyurethane Foams Blown by Environmentally Friendly Blowing Agents

  • Kim, Youn-Hee;Choi, Seok-Jin;Kim, Ji-Mun;Han, Mi-Sun;Kim, Woo-Nyon;Bang, Kyu-Tae
    • Macromolecular Research
    • /
    • 제15권7호
    • /
    • pp.676-681
    • /
    • 2007
  • A process designed to synthesize rigid polyurethane foam (PUF) with insulative properties via the modulation of PUF cell size via the addition of clay and the application of ultrasound was assessed. The blowing agents utilized in this study include water, cyclopentane, and HFC-365mfc, all of which are known to be environmentally-friendly blowing agents. The rigid PUFs were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI) and polyether polyol with a density of $50kg/m^3$. In addition, rigid PUFs/clay nanocomposites were synthesized with clay modified by PMDI with and without the application of ultrasound. The PUF generated using water as a blowing agent evidenced the highest tensile strength. The tensile strength of the PUF/nanocomposites was higher than that of the neat PUF and the strength was even higher with the application of ultrasound. The cell size of the PUF/clay nanocomposites was less than that of the neat PUF, regardless of the type of blowing agent utilized. It appears that the higher tensile strength and lower cell size of the PUF/clay nanocomposites may be attributable to the uniform dispersion of the clay via ultrasonic agitation. The thermal conductivity of the PUF/clay nanocomposites generated with HCFC-141b evidenced the lowest value when PUF/clay nanocomposites were compared with other blowing agents, including HFC-365mfc, cyclopentane, and water. Ultrasound has also proven effective with regard to the reduction of the thermal conductivity of the PUF/clay nanocomposites with any of the blowing agents employed in this study. It has also been suggested that the uniformly dispersed clay particles in the PUF matrix function as diffusion barriers, which prevent the amelioration of the thermal insulation property.

나노입자 코팅 탄소섬유 강화 복합재료의 전기전도도 향상 (Improvement of Electrical Conductivity of Carbon-Fiber Reinforced Plastics by Nano-particles Coating)

  • 서성욱;하만석;권오양;최흥섭
    • Composites Research
    • /
    • 제23권6호
    • /
    • pp.1-6
    • /
    • 2010
  • 복합재 항공기 동체의 낙뢰손상방지를 목적으로 탄소섬듐-주석 산화물(ITO) 나노입자를 코팅함으로써 탄소섬유강화플라스틱(CFRP) 복합재료의 전기전도도를 향상하였다. 탄소섬유에 코팅된 ITO 나노입자는 10~40%의 농도로 콜로이드 상태에서 분사되었다. CFRP의 전기전도도는 코팅 후 3배 이상 증가하였으며 현재 B-787 복합재 항공기 동체에 사용 중인 기술인 금속메쉬를 CFRP 외층에 매몰한 경우보다도 높은 전기전도도를 얻을 수 있었으며, 나노입자 코팅으로 섬유-기지 계면에 미지는 악영향은 발견되지 않았다. 모의 낙뢰에 의한 손상영역은 각각 다른 처리를 한 재료와 조건에 따라 초음파 C-scan 이미지로 확인하였다. ITO 40% 코팅 시편의 경우 전기전도도는 B-787 샘플의 경우보다 높았지만 낙뢰에 의한 손상영역의 크기는 거의 비슷한 수준이었다.

포천화강암내에 발달한 결의 역학적 이방성과 미세균열의 상관성 (Mechanical Anisotropy Dependent on the Rock Fabric in the Pocheon Granite and its Relationship With Microcracks)

  • 장보안;오선환
    • 지질공학
    • /
    • 제11권2호
    • /
    • pp.191-203
    • /
    • 2001
  • 포천 화강암에 대하여 결의 방향성에 따른 역학적 이방성 및 미세균열의 발달관계를 규명하였다. 일축압축강도는 177MPa∼212MPa의 범위를, 탄성계수는 48GPa∼62GPa, 인장강도는 6.9MPa∼8.5MPa, 탄성파 속도는 3,200m/sec∼3,700m/sec의 범위를 보인다. 이방성 비는 역학적 특성에 따라 최소 14%에서 최대 24%이며 1결에 의한 영향이 가장 크게 나타난다. 미세균열의 방향성은 결의 방향성과 상당한 연관성을 가진다. 그러나 장석 내에는 결정의 방향에 따라 미세균열들이 발달해 있어서 결의 방향과는 상당한 차이를 보이나, 석영 내에는 연장성이 매우 좋고 결의 방향과 거의 평행한 방향으로 많은 미세균열들이 발달해 있어서 석영 내에 발달한 미세균열의 방향성이 결의 방향을 지배하는 것으로 사료된다. 차분 변형률 분석과 현미경 관찰에 의한 미세균열의 방향성은 대체로 결의 방향과 상당히 유사하나, 각각의 측정 방법에 따라 약간의 차이를 보인다. 이러한 결과는 차분변형률이 미세균열의 폭을 측정하는 반면에 현미경 관찰은 길이나 개수를 측정하기 때문인 것으로 사료된다.

  • PDF

SM45C재의 PVD코팅과 필름에 의한 트라이볼러지 특성 (Variations in Tribological Characteristics of SM45C by PVD Coating and Thin Films)

  • 심현보;서창민;김종형;서민수
    • 한국해양공학회지
    • /
    • 제32권6호
    • /
    • pp.502-510
    • /
    • 2018
  • In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

Facile Synthesis of g-C3N4 Modified Bi2MoO6 Nanocomposite with Improved Photoelectronic Behaviors

  • Zhu, Lei;Tang, Jia-Yao;Fan, Jia-Yi;Sun, Chen;Meng, Ze-Da;Oh, Won-Chun
    • 한국재료학회지
    • /
    • 제31권11호
    • /
    • pp.593-600
    • /
    • 2021
  • Herein, a series of g-C3N4 modified Bi2MoO6 nanocomposites using Bi2MoO6 and melamine as original materials are fabricated via sintering process. For presynthesis of Bi2MoO6 an ultrasonic-assisted hydrothermal technique is researched. The structure and composition of the nanocomposites are characterized by Raman spectroscopy, X-ray diffraction (XRD), and high-resolution field emission scanning electron microscopy (SEM). The improved photoelectrochemical properties are studied by photocurrent density, EIS, and amperometric i-t curve analysis. It is found that the structure of Bi2MoO6 nanoparticles remains intact, with good dispersion status. The as-prepared g-C3N4/Bi2MoO6 nanocomposites (BMC 5-9) are selected and investigated by SEM analysis, which inhibits special morphology consisting of Bi2MoO6 nanoparticles and some g-C3N4 nanosheets. The introduction of small sized g-C3N4 nanosheets in sample BMC 9 is effective to improve the charge separation and transfer efficiency, resulting in enhancing of the photoelectric behavior of Bi2MoO6. The improved photoelectronic behavior of g-C3N4/Bi2MoO6 may be attributed to enhanced charge separation efficiency, photocurrent stability, and fast electron transport pathways for some energy applications.

적외선 카메라와 YOLO를 사용한 블랙아이스 탐지 방법 (A Black Ice Detection Method Using Infrared Camera and YOLO)

  • 김형균;장민석;이연식
    • 한국정보통신학회논문지
    • /
    • 제25권12호
    • /
    • pp.1874-1881
    • /
    • 2021
  • 폭설로 인한 도로 미끄러짐과 함께 영하의 기온으로 도로와 차량 통행용 다리, 터널 출입구 쪽에서 주로 발생하는 블랙아이스는 운전자의 시야에서는 아스팔트의 이미지가 투과되어 보이기에 잘 인식되지 않아서 자동차들이 미끄러지는 (슬립 현상) 상황을 발생시키기에 차량이 제동력을 잃어서, 대형 교통사고로 이어져 심각한 인명과 재산상 손실을 초래하고 있다. 본 논문에서는 기존에 연구되었던 블랙아이스 감지 방법들(인공위성 촬영, 초음파 수신으로 미끄러짐의 패턴을 확인, 도로 표면의 온도측정, 차량 주행 중 타이어의 마찰력 차이를 확인하기)의 단점들을 보완하고, 블랙아이스를 감지하는 센서의 크기를 줄여서 많은 이동체에 적용할 수 있도록 하고자 적외선 카메라를 이용하여 도로 상태를 확인하고, 이 정보를 딥러닝 학습을 통하여 블랙아이스를 판별하는 방법을 제안하고자 한다.

라오스 밧푸 주사원의 보존현황과 석재의 초음파 물성 및 구조적 변형특성 (Ultrasonic Properties on Building Stones, Characteristics of Structural Deformation and Conservation States of the Sanctuary in Wat Phou Temple of Champasak, Lao PDR)

  • 이찬희;신효철;한두루
    • 보존과학회지
    • /
    • 제33권6호
    • /
    • pp.399-416
    • /
    • 2017
  • 라오스 '참파삭 문화경관 내 밧푸 사원과 고대주거지' 유적은 2001년 유네스코 세계문화유산으로 등재되었다. 현재 밧푸 주사원의 상부구조는 대부분 붕괴되어 있다. 또한 다양한 손상이 진행되고 있어 과학적이고 체계적인 진단을 통한 보존관리가 필요하다. 주사원은 사암과 벽돌을 주요 부재로 사용했으며, 균열과 탈락, 박리, 이격 등의 물리적 손상과 지의류, 선태류, 초본식물 등의 생물학적 손상이 심하다. 주사원의 석재를 대상으로 초음파 속도를 측정하여 물성을 평가한 결과, 주사원 동측면 사암의 풍화도지수는 0.10~0.74(평균 0.36)로 산출되어 중간풍화단계(MW)를 나타냈다. 남측면과 북측면은 평균 0.30와 0.32의 풍화도지수를 보여 상대적으로 높은 물성을 보였다. 주사원 기단의 경사도 분석결과, 남측면 4번 지점이 $5^{\circ}W$의 경사를 나타내 가장 큰 기울기를 보였으며, 이는 지반의 불안정에서 기인한 것으로 판단된다. 또한 상대적 수준측량 및 과거 측량도면을 검토할 때 주사원은 평지가 아닌 일정한 경사를 가진 지반에 자리한 것을 확인하였다. 남측면의 지반이 북측면에 비해 $1.51^{\circ}$ 더 기울어져 있는 것으로 보아 구조안정성에 영향을 미칠 것으로 보인다. 이격거리 분석 결과, 남측면 부재의 주요 이격은 평균 159.5 mm로 가장 큰 범위를 보이며, 상부로 올라갈수록 폭이 증가하여 가장 넓은 곳은 평균 328.3 mm를 나타냈다. 이와 같은 이격은 하부 지반의 부등침하에 따라 발생한 것으로 판단된다. 밧푸 주사원은 부분적으로 붕괴와 물리적 손상이 진행되어 건물의 구조안정성에 대한 지속적인 보존관리가 필요한 상태이다.

일제강점기 조선통감부 건축재료의 물리화학적 특성과 평가 (Evaluation and Physicochemical Property for Building Materials from the Japanese Ministry of General Affairs in Joseon Dynasty)

  • 박석태;이정은;이찬희
    • 자원환경지질
    • /
    • 제55권4호
    • /
    • pp.317-338
    • /
    • 2022
  • 근대건축으로 알려진 조선통감부 자리의 콘크리트와 토관 및 벽돌을 대상으로 3시기로 세분하여 물리화학적 특성과 평가를 검토하였다. 콘크리트는 모두 비슷한 가비중과 흡수율을 보였으며 다량의 골재와 석영, 장석, 방해석 및 포틀란다이트가 검출되었다. 벽돌의 공극률은 1907년의 것이 1910년 및 1950년 벽돌보다 높았다. 토관도 유사하나 초기의 것이 보다 치밀한 것으로 나타났다. 벽돌과 토관은 암적색에서 암갈색을 띠며 많은 균열과 기공이 관찰되나, 상대적으로 토관의 기질이 균질하다. 벽돌에서는 석영, 장석 및 적철석이 검출되었으며, 토관에서는 석영 및 장석과 뮬라이트가 확인되는 것으로 보아, 모두 1,000~1,100℃의 소성온도를 거친 것으로 해석된다. 콘크리트는 유사한 CaO 함량을 보이나, 벽돌과 토관은 1907년 시료에서 SiO2는 낮고 Al2O3가 높다. 그러나 이들은 유사한 지구화학적 거동특성을 갖는 등 성인적 동질성이 높다. 콘크리트 기초의 초음파속도와 반발경도는 잔존상태에 따라 다르나 물성은 다소 낮았다. 이를 일축압축강도로 환산하면 1차 증축구역이 평균 45.30 및 46.33 kgf/cm2로 가장 높고, 2차 증축구역이 가장 낮은 평균치(20.05 및 24.76 kgf/cm2)를 보였다. 특히 CaO 함량과 흡수율이 작을수록 초음파속도와 반발경도가 높았다. 조선통감부 건축에 활용한 콘크리트는 시기별로 비슷한 배합특성과 비교적 일정한 규격이 있었던 것으로 보인다. 벽돌과 토관은 거의 동일한 점토질 원료를 사용하여 유사한 제작과정을 거친 것으로 해석된다.

진단용 초음파에 의해 가진된 초음파 조영제에서 방사하는 하모닉 성분의 크기: 이론적 고찰 (Magnitudes of the Harmonic Components Emitted from Utrasonic Contrast Agents in Response to a Diagnostic Utrasound: Theoretical Consideration)

  • 강관석;유지철;팽동국;임성민;최민주
    • 한국음향학회지
    • /
    • 제24권2호
    • /
    • pp.78-86
    • /
    • 2005
  • 진단용 초음파에 의해 가진된 초음파 조영제에서 방사하는 하모닉 성분의 크기를 이론적으로 고찰하였다. 본 연구에서는 2 MHz 진단용 초음파 펄스에 의한 초음파 조영제의 비선형 동적 반응을 Gilmore Model을 이용하여 수치 해석하였다. 초음파 조영제의 탄성 효과는 무시하였다. 초음파 조영제 반경의 크기 (1-9 $\mu$m)와 초음파의 MI 값 (0.125-8)을 변화시키면서 발생된 서브, 울트라. 2차 하모닉 성분의 파워를 기본 주파수 성분과 비교하였다. 시뮬레이션 결과, 초음파 조영제가 공진 반경 (2 $\mu$m) 보다 클 경우, 초음파 조영제에서 방출하는 서브 하모닉의 파워가 기본 주파수 것 보다 압도적으로 크게 나타났다. 특히 하모닉 영상에서 사용하는 2차 하모닉의 파워는 서브 및 울트라 하모닉 성분 보다 낮은 값을 가지는 것으로 예측되었다. 본 연구 결과는 초음파 조영제를 이용하여 하모닉 영상을 구현할 경우, 서브 및 울트라 하모닉 성분이 2차 하모닉 성분 보다 우수한 영상 변수가 될 수 있음을 시사한다.