• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.29-37
• /
• 2006

In remediation of the contaminated soil, it requires to select at least more than two remediation technologies depending on the fate and transport phenomena through complicated reactions in soil matrix. Therefore, methodologies related to develop the integrated remediation technology were reviewed for agricultural soils contaminated with heavy metals. Pneumatic fracturing is necessary to implement deficiency because soil washing is not effective to remove heavy metals in the subsurface soil. But it needs to evaluate the characteristics such as essential data and factors of designated technology in order to effectively apply them in the site. In the remediation site, the important soil physical and chemical factors to be considered are hydrology, porosity, soil texture and structure, types and concentrations of the contaminants, and fate and its transport properties. However, the integrated technology can be restrictive by advective flux in the area which remediation is highly effective although both soil washing and pneumatic fracturing were applied simultaneously in the site. Therefore, we need to understand flow pathways of the target contaminants in the subsurface soils, that includes kinetic desorption and flux, predictive simulation modeling, and complicated reaction in heterogenous soil.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.317-330
• /
• 2021

Objectives: By law, companies in Korea must periodically measure workers' exposure to harmful chemicals (the system is called the Work Environment Monitoring Program (WMP)[a]) and report the results to the government. The government also measures exposure to monitor the WMP's reliability (called Reliability Assessment (RA) for WMP[b]). The issue is that measured data from these two sources are so different that the objectivity of WMP needs to be confirmed by comparing the results using the European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA). Methods: Step 1: Data collection from WMP reports submitted by companies (n=586) and RA for WMP written by the government (n=33). Step 2: Data Standardization by key information included. Step 3: Data conversion to input-variables required to run the ECETOC TRA model, and run the model with specific data (n=514) which meet the predetermined exposure scenario. Step 4: Statistical data analysis by process category (PROC) and ventilation type from each source ([A] and [B]). Step 5: Additional analysis of any unexpected results. Results: The process categories of the production and handling of Dichloromethane were classified into 12 PROCs, and ten of them were selected to run ECETOC TRA. Modeled values tended to be higher than measured values from both sources. For the measured values from WMP, RCR distribution by PROC was narrow (0.197-0.267, 95% CI) and did not have a relationship with ventilation type, which differs from the tendency of the modeling result. Meanwhile, the measured values from RA for WMP were relatively widely distributed (0.301-1.177, 95% CI) by PROC. In particular PROCs (13,19) were high enough to exceed 1. Also, they become low with better ventilation types and appear differently depending on the ventilation type, similar to the model result. Conclusions: This study revealed that ECETOC TRA might have the potential to serve as a screening tool for exposure assessment and to be used as assistive method for WMP to estimate exposure. Further empirical study is required to confirm its availability as a screening tool.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.197-211
• /
• 2018

We conducted this research to examine how well regional housing prices are suited to use as an alternative to conventional census-based regional deprivation indices in health and medical geography studies. To examine the relative performance of mean regional housing prices compared to conventional census-based regional deprivation indices, we compared several multilevel logistic regression models, where the first level was individuals and the second was health districts in the Seoul Metropolitan Area (SMA) in Korea, for the sake of adjusting the regional clustering tendency of unknown factors. In these models, we predicted two dichotomous variables that represented individuals' after-lunch tooth brushing behavior and use of dental floss by individual characteristics and regional indices. Then, we compared the relative predictive performance of the models using the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC). The results from the estimations showed that mean regional housing prices and census-based deprivation indices were correlated with the two types of dental health behavior in a statistical sense. The results also revealed that the model with mean regional housing prices showed smaller AIC and BIC compared with other models with conventional census-based deprivation indices. These results imply that it is possible for housing prices summarized using aerial units to be used as an alternative to conventional census-based deprivation indices when the census variables employed cannot properly reflect the characteristics of the aerial units.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.175-184
• /
• 2019

This paper presents a modeling prototype that optimizes construction processes implementing information communication technology (ICT). Using "IAMB", each and every actual steps of the construction process may be defined visually and explicitly by elaborating ICT to improve productivity and management efficiency. It contributes to identify the features on what parts of construction task are covered by ICT, and the effects of ICT on process performance. After analyzing 10 real project cases, ICT application types are classified into four categories according to ICT type, job functions that ICT applied, and the project phase in which ICT used. As a reuslt, it was confirmed that the positive outcomes on the construction process were beneficial to mostly the general contractors and mainly obtained by automated information processing, external consignment and consistent information use. Negative effects, which were occurred by mainly manual manipulation and duplication of information handling, were accrued to general contractors minimally, but to subcontractors maximally. Expert focus group commends that several important issues should be considered when implementing ICT.

• Membrane Journal
• /
• v.31 no.4
• /
• pp.253-261
• /
• 2021

Solutions to water pollution, global warming, and climate change have been currently discussed. Pressure retarded osmosis (PRO) using a difference in salt concentration between two fluids is proposed to meet the demand for clean water and produce eco-friendly energy. Although PRO has been researched continuously, it has not been commercialized yet due to limitations such as lack of technology and the high price of membranes. Meanwhile, the membrane is one of the most significant parts of the PRO engine and salinity gradient power (SGP) technology. Research continues to technologically develop graphene oxide membranes and nanocomposite membranes used in salinity gradient power generation. Studies on efficient membranes, solvents, and solutes are active to enable high energy efficiency of the osmotic heat engine even at low temperatures of waste. Studies have been conducted on reducing internal concentration polarization and increasing power density by using membranes with balanced permeability and selectivity. In this review, dealing with these studies, we discuss the types of PRO membranes, theoretical modeling of technologies through efficient membranes, and other technologies to develop the process efficiency.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.77-86
• /
• 2021

A method of constructing a war simulation based on Bayesian Inference was proposed as a method of constructing heterogeneous historical war data obtained with a time difference into a single model. A method of applying a linear regression model can be considered as a method of predicting future battles by analyzing historical war results. However it is not appropriate for two heterogeneous types of historical data that reflect changes in the battlefield environment due to different times to be suitable as a single linear regression model and violation of the model's assumptions. To resolve these problems a Bayesian inference method was proposed to obtain a post-distribution by assuming the data from the previous era as a non-informative prior distribution and to infer the final posterior distribution by using it as a prior distribution to analyze the data obtained from the next era. Another advantage of the Bayesian inference method is that the results sampled by the Markov Chain Monte Carlo method can be used to infer posterior distribution or posterior predictive distribution reflecting uncertainty. In this way, it has the advantage of not only being able to utilize a variety of information rather than analyzing it with a classical linear regression model, but also continuing to update the model by reflecting additional data obtained in the future.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.199-210
• /
• 2000

The IBAC (In-Band Adjacent-Channel) DAB (Digital Audio Broadcasting) system is to provide multichannel CD quality audio services and multimedia data services including text and picture in FM band (88~105 MHz). As the FM band is being used by the existing analog radio broadcasting, there must he an analysis of the interference effect between IBAC DAB and analog FM signal. Therefore, the protection ratio should be evaluated to verify the system compatibility and allocate the new IBAC DAB channel in FM band. In this paper, among the three types of interferences, FM-to-DAB, DAB-to-FM and DAB-to-DAB, that can be occurred, the Protection ratio of IBAC DAB system for co-channel FM interferer is analyzed by modeling the FM interferer and considering the multipath fading channel. The simulation results show that IBAC DAB system has far better sensitivity than Eureka 147 and needs a relatively high protection ratio for co-channel FM interferer, because of its narrow bandwidth, about one third of that of Eureka 147.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.443-455
• /
• 2013

Electrochemical studies on charge transfer reactions across the interface between two immiscible electrolyte solutions (ITIES) have greatly attracted researcher's attentions due to their wide applicability in research fields such as ion sensing and biosensing, modeling of biomembranes, pharmacokinetics, phase-transfer catalysis, fuel generation and solar energy conversion. In particular, there have been extensive efforts made on developing sensing platforms for ionic species and biomolecules via gelifying one of the liquid phases to improve mechanical stability in addition to creating microscale interfaces to reduce ohmic loss. In this review, we will mainly discuss on the basic principles, applications and future aspects of various sensing platforms utilizing ion transfer reactions across the ITIES. The ITIES is classified into four types : (i) a conventional liquid/liquid interface, (ii) a micropipette supported liquid/liquid interface, (iii) a single microhole or an array of microholes supported liquid/ liquid interface on a thin polymer film, and (iv) a microhole array liquid/liquid interface on a silicon membrane. Research efforts on developing ion selective sensors for water pollutants as well as biomolecule sensors will be highlighted based on the use of direct and assisted ion transfer reactions across these different ITIES configurations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.43-59
• /
• 2017

This study presents the prediction methodology of debris flow occurrence areas using the SINMAP model. Former studies used a single calibration region applying some of the soil test results to predict debris flow occurrence in SINMAP model, which couldn't subdivide the soil properties for the target areas. On the other hands, a multi-calibration region using a detailed soil map and soil strength parameters (c, ${\phi}$) for each soil series to make up for limitation of former studies is proposed. In this process, soils with soil erodibility factor (K) are classified into three types: 1) gravel and gravelly soil. 2) sand and sandy soil, and 3) silt and clay. In addition, T/R estimation method using mean elevation of target area instead of T/R method using actual occurrence time is suggested in this study. The suggested method is applied to Seobyeok-1 ri area, Bonghwa-gun where debris flow occurred. As a result of comparison between two T/R estimation method, both T/R estimations are almost equal. Therefore, the suggested methodologies in this study will contribute to set up the national-wide mitigation plan against debris flow occurrence.

• Korean small business review
• /
• v.41 no.3
• /
• pp.23-47
• /
• 2019

This study investigates the effects of three types of person-environment fit, i.e. POF, PJF(ability) and PJF(needs), on effectiveness variables and the mediating effect of work motivation in SMEs. The data were collected from 211 employees who work for SMEs. Results of structural equation modeling(SEM) analyses demonstrated that PJF(ability) was significantly associated with task performance and turnover intention, while POF and PJF(needs) were significantly associated with turnover intention only. PJF(needs) and PJF(ability) have the positive impact on intrinsic motivation, PJF(ability) also has the positive impact on external and identified motivation. We also analysed mediating effects using Process macro. Results demonstrated that intrinsic motivation mediated the relationship between POF, PJF(needs), PJF(ability) and task performance. The relationship between PJF(ability) and task performance was mediated by external motivation. Based on the results, theoretical and practical implications are derived. Also suggested are methodological limitations and future research directions.