• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.211-215
• /
• 2013

Partial discharge diagnosis techniques using ultra high frequencies do not affect load movement, because there is no interruption of power. Consequently, these techniques are popular among the prevention diagnosis methods. For the first time, this measurement technique has been applied to the GIS, and has been tested by applying an extra high voltage switchboard. This particular technique makes it easy to measure in the live state, and is not affected by the noise generated by analyzing the causes of faults ? thereby making risk analysis possible. It is reported that the analysis data and the evaluation of the risk level are improved, especially for poor location, and that the measurement of Ultra high frequency (UHF) partial discharge of the real live wire in industrial switchgear is spectacular. Partial discharge diagnosis techniques by using the Ultra High Frequency sensor have been recently highlighted, and it is verified by applying them to the GIS. This has become one of the new and various power equipment techniques. Diagnosis using a UHF sensor is easy to measure, and waveform analysis is already standardized, due to numerous past case experiments. This technique is currently active in research and development, and commercialization is becoming a reality. Another aspect of this technique is that it can determine the occurrences and types of partial discharge, by the application diagnosis for live wire of ultra high voltage switchgear. Measured data by using the UHF partial discharge techniques for ultra high voltage switchgear was obtained from 200 places in Gumi, Yeosu, Taiwan and China's semiconductor plants, and also the partial discharge signals at 15 other places were found. It was confirmed that the partial discharge signal was destroyed by improving the work of junction bolt tightening check, and the cable head reinforcement insulation at 8 places with a possibility for preventing the interruption of service. Also, it was confirmed that the UHF partial discharge measurement techniques are also a prevention diagnosis method in actual industrial sites. The measured field data and the usage of the research for risk assessment techniques of the live wire status of power equipment make a valuable database for future improvements.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.58-64
• /
• 2010

Purpose: Bicycle riding is an increasingly popular sports and leisure activity in Korea. The aim of this study was to identify injury patterns of admitted patients who were injured from bicycle riding. Materials and Methods: This study examined 71 patients from Jan. 2008 to May 2009. There were 54 male and 17 female patients. We investigated the injured body parts, mechanisms of injury, location of injury, types of bicycles, purpose of bicycle riding, any concomitant luggage or passenger on rear seat, injury seasons and the helmet use. We analyzed the data using Injury Severity Score(ISS). Results: There were 11 cases of ISS 1, 41 cases of ISS 4, 2 cases of ISS 5, 13 cases of ISS 9, one case of ISS 13, two cases of ISS 16 and one case of ISS 29 among the 71 patients. 36 patients(50.7%) underwent surgery for upper and lower extremity injuries, two patients for vertebral body fractures, 8 patients for facial bone injuries and one patient for abdominal organ injury. There were 10 head injuries among whom three patients received treatment in ICU(4.2%). Conclusion: Bicycle riding can cause severe injuries with subsequent admission and major surgeries. Several measures including constructing more bicycle road, public campaign and wearing protective gears should be instituted.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.64-71
• /
• 2010

Purpose: To evaluate pathologic patterns and outcomes of treatment of a biceps tendon lesion associated with a rotator cuff tear. Materials and Methods: We reviewed 92 patients (i) who underwent surgery for a cuff tear, (ii) for whom the biceps lesion could be observed retrospectively, and (iii) had a minimum follow-up of 2 years. The pathology of biceps tendon was classified into 4 types: tenosynovitis, fraying or hypertrophy, tear, and instability. All but the 4 with massive cuff tears were repaired. The biceps lesions were treated with debridement in 30, tenotomy in 10, tenodesis in 8, and recentering in 4. UCLA scoring was used for clinical results. Results: Seventy patients had a biceps lesion, 19 tenosynovitis, 22 fraying or hypertrophy, 21 a tear, and 8 instability. A biceps lesion was observed in 63% of cases of cuff tears below the medium size, and in 88% of cases with cuff tears above the large size. UCLA scores according to the pathology of the biceps lesion were 29.6 in the absence of a biceps lesion, and 28.3 in its presence. UCLA scores in patients with tenotomy or tenodesis for associated biceps tendon lesions were 28.2. Conclusion: There is a greater incidence and severity of a biceps lesion with a larger cuff tear. Therefore, the cause of a biceps lesion might be related to the cause of the cuff tear. Among the several options of treatment for biceps lesion, tenotomy or tenodesis may be particularly effective in providing pain relief.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.79-84
• /
• 2004

Pilomatricoma is a benign soft tissue tumor of hair follicle origin. They occur most commonly in the head and neck region and are usually found in girls during the first two decades of life. Although malignant transformation has been described, it is exceedingly rare. The clinical presentation is typically that of an asymptomatic, superfical, solitary, firm mass that is often accompanied by a reddish-blue discoloration of the overlying skin. Histopathologically pilomatricoma are seen as epithelial islands embedded in a cellular stroma. The epithelial component consist of two main cell types : basaloid cells and ghost cells. Intracellular and stromal calcification is reported in many cases. Diagnosis is usually suspected based on palpation of a superficial, rock-hard mass and confirmed by histopathologic examination. Surgical excision is both curative and the treatment of choice. Recurrence is rare. In this case, the radiographs showed a dense calcification, measuring about 1cm diameter. So simple excision was peformed intraorally, and resultantly the lesion was proved to be a pilomatricoma by histological examination.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.63-67
• /
• 2009

STATEMENT OF PROBLEM. Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. PURPOSE. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. MATERIAL AND METHODS. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material(Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. RESULTS. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile bonding strength to Silfix-Imprint II at all drying periods. CONCLUSION. Significant increase in tensile bonding strength with Silfix-Aquasil and VPS Tray adhesive-Imprint II combination until 10 and 15 minutes respectively. Tray adhesive-impression material combination from the same company presented higher tensile bonding strength at all drying time intervals than when using tray adhesive-impression material of different manufactures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.1
• /
• pp.45-53
• /
• 1995

Working depth of the model net was determined by using of the same experimental tank and the same model net that used in the forwarded report in a series studies. The depth of the net which indicates the depth of the head rope from the water surface, was determined by the photographs taken in front of the net mouth with the combination of towing velocity, warp length and distance between paired boats. The results obtained can be summarized as follows: 1. Working depth of model nets A and B was varied in the range of 0.09~1.66$m$,and 0.04~1.34$m$(which can be converted into 2.7~40.2$m$and 1.2~49.8$m$in the full-scale net) respectively, and the depth of model net A was slightly deeper than the depth of the model net B. 2. Working depth ($D$,which is appendixed m for the model net, f for the full-scale net, A and B for the types of the model nets) can be expressed as the function of towing velocity$V_t$, as in the model net($V_t$=$m$/$sec$) $D_{mA}$=(-1.99+0.65$L_w$) $e^{-1.72V_t}$ $D_{mA]$=(-1.91+1.04 $L_w$) $e^{2.88V_t}$ in the full-scale net($V_t$=$k$'$t$ $D_{fA}$=(-29.32+0.65$L_w$)$e^{0.40 V_t}$ $D_{fB}$=(-57.60+1.04$L_w$)$e^{-0.67 V_t}$ 3. Working depth 9$D$ appendixes are as same as the former) can be expressed as the function of warp length$L_w$) in the model net, and can be converted into full-scale net as in the model net ($V_t$=$m$/$sec$) $D_{mA}$=-0.99 $e^{-1.42V_t}$+0.67$e^{-1359V_t}$$L_w$ $D_{mB}$=-.258$e^{-3.77V_t}$+1.16$e^{-3.15V_t$ $L^w$, in the full-scale net($V_t$=k't) $D_{fA}$=-29.28$e^{-0.32V_t}$+0.67$e^{-0.37V_t$$L_w$ $D_{fB}$=-69.10$e^{-0.81V_t}$+1.16$e^{-0.72V_t}$$L_w$. 4. Working depth was gradually shallowed according to the increase of the distance between paired boats.

• Radiation Oncology Journal
• /
• v.12 no.1
• /
• pp.109-115
• /
• 1994

The purpose of this paper is to develop an efficient method for the quick determination of multiple isocenters plans to provide optimal dose distribution in sterotactic radiosurgery. A Spherical dose model was developed through the use of fit to the exact dose data calculated in a 18cm diameter of spherical head phantom. It computes dose quickly for each spherical part and is useful to estimate dose distribution for multiple isocenters. An automatic computer search algorithm was developed using the relationship between the isocenter move and the change of dose shape, and adapted with a spherical dose model to determine isocenter separation and cellimator sizes quickly and automatically. A spheric81 dose model shows a comparable isodose distribution with exact dose data and permits rapid calculations of 3-D isodoses. the computer search can provide reasonable isocenter settings more quickly than trial and error types of plans, while producing steep dose gradient around target boundary. A spherical dose model can be used for the quick determination of the multiple isocenter plans with 3 computer automatic search. Our guideline is useful to determine the initial multiple isocenter plans.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2019

Tunnel construction by TBMs should be supported by the performance of a screw conveyor in order to obtain the optimum penetration rate, so studies related to the screw conveyor performance have been being conducted. Compared to the study on the performance of the screw conveyor for the soil, however, the research on the performance of the screw conveyor for the rock is insufficient. Considering the domestic tunnel sites with more rock layers than soil layers, simulation of discharge of 6 types of rock chips by the screw conveyor was conducted using DEM. Regardless of the shape and volume of the rock chips, the discharge rates of the rock chips by the parallel placed screw conveyor at a speed of 10 RPM in the same rock mass were about 20% (standard deviation: 1.3%) of the maximum volume of discharge rate by the screw conveyor. It is expected that this study can be used as a reference material for screw conveyor design and operation in TBM excavations in rock masses.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.92-97
• /
• 2000

Osteosarcoma is a primary malignant tumor arising most often in the long bone, but rare in jaw bone. Especially osteogenic sarcoma of the mandible is a rare tumor, comprising less than 0.5% of all head and neck tumors. Osteosarcoma occurs chiefly in young persons, and presenting very survival rates. Histopathologically this tumor can be classified three types, osteoblastic, fibroblastic, chondroblastic and classified from low grade to high grade by anaplasia or mitosis of the tumor cells. Sometimes, the exact diagnosis of osteosarcoma is difficult especially in low grade osteosarcoma, even if clinical or radiographical findings suggest to osteosarcoma. So suspcious to malignant bone tumor in clinical or radiological findings, biopsy should be taked from deep portion and multiple area, and sharing the patient history and radiographs with pathologist will assist in the development of the diagnosis. We report a case of low grade osteosarcoma on the mandible initially difficulty in accurate diagnosis. The patient visited our hospital for routine dental treatment but radiographic findings displayed ill-defined radiolucency with osteoid formation on the mandible. Final diagnosis was difficulty in initial biopsy but subsequent biopsy taked from deep portion presented infiltrative growth and mitosis of the tumor cell in some area with small osteoid bone formation, so we could reach final diagnosis as low grade sarcoma. We treated this patient with bloc resection of the mandible and immediate reconstruction with iliac corticocancellous block.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.54-58
• /
• 2004

The aim of this study was to develop special birdcage resonators for small objects including the human wrist, hand and small animals, using 3T MRI/MRS. Before substantial development, different types of parameters were arranged, based on theoretical analysis, through lumped element transmission line theory. The primary analysis was peformed with a network analyzer (HP 4195A) and the final experimental analysis was carried out with 3T MRI (Medinus, Korea). The manufactured birdcage resonator is typically composed of 12-element structures to which a low-pass filter is fundamentally applied. The diameter and length of each element of the birdcage resonator were as follows: (1) diameter 12 cm, length of element 22 cm, (2) diameter 15 cm, length of element 22 cm, and (2) diameter 17 cm, length of element 25 cm. Copper tape with a width of 1 cm was used for the coils. MRI acquisition parameters were TR=500 ms, TE=17 ms, and Ave=2 for T1-WT images, and TR=4,000 ms, TE=96 ms, and Ave=2 for T2-WT images. The ratio of the samples diameter to the birdcage resonators diameter was approximately 55%, 63% and 70%, respectively, for the three elements. This study determined that the best image quality and S/N ratio were obtained when the ratio of the object's diameter was approximately 50∼80%. A general theoretical analysis of the birdcage coil differs in many respects from the experimental results which were influenced by many factors that were not considering when the general theoretical analysis of the birdcage coil was peformed. The induced resistance may be considered as part of the resistive loss if the quantitative value can be determined using a radiation resistance approach.