• Journal of the Korean Home Economics Association
• /
• v.43 no.1 s.203
• /
• pp.105-113
• /
• 2005

The purpose of this study was to suggest a standard sizing system for college female students' head wears according to their head types. The subjects were 193 college women, of 20 to 25 years-old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. In previous tudy (Lim, 2004), 3 clusters as their head types were categorized. the sizing system, which had frequencies more than $4\%$ was classified 6 cases, 7 cases and 9 cases, respectively, by head 3 types. 3 types of size system, which were 56-28-38, 56-30-38 and 57-28-38(Eds note: which of the measurements are head girth, surface length 1 and surface length 2), which were included in 3 clusters. Although head girths were as the same, head surface length was different in size. On the contrary, head surface length was same, head girth was different. The result will contribute to fitness of head wear fitness of consumer, and the amount of production.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.182-188
• /
• 2004

The purpose of the study was to provide scientific and accurate data of head shape for men. This study was carried out on 214 men and Factor analysis, Cluster analysis, Duncan analysis with 15 variables were performed using the data. A 3D scanner was used for visual results of head shape. The results were as follows. First, through factor analysis of the variables, three factors were extracted upon factor scores. The first factor described thickness part, and second factor described width parts and the third factor described vertical length parts. Four clusters represented characteristics of men's head types. Type 1 had a larger head thickness, type 2 had a smaller thickness and smaller width. type 4 had a generally larger head. In the distribution of the four clusters, type 1 was distributed 34%. Type 4 was distributed 23%. According to the results, type 1 of the more thick and narrow head was dominant among head types of men.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.47-52
• /
• 2020

The general flatbed printer system is composed of a PC and a dedicated S/W, which is inconvenient to use. In the end, there is a need for a technology that can easily and conveniently use various types of printing through simplification, smartization, etc. of a flatbed printer system configuration. That is, there is an increasing demand for multi-dimensional printer capable of printing on various types of materials with one printer and capable of printing various types of products. Therefore, in this paper, we developed a flatbed printer system capable of multi-dimensional printing using Head Encoder/Trigger control. To this end, we developed a flatbed printer that connects the internal module of the flatbed printer with an input type detection sensor and controls all operating states by the head encoder and head trigger signals of the printer through separate main controllers. Through this, the development and diffusion of IoT technology will expand the printer control of the smart environment to the developed form throughout the industry. It is expected to contribute to the development of the 3D printing industry in the future.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.2 s.5
• /
• pp.95-104
• /
• 2002

This paper presents the pull-out failure mode on Headed Bars and prediction of tensile capacity, as governed by concrete cone failure. 17 different plate types, three different concrete strengths and three different welding types of specimens were simulated. Test variables are the reinforcing bar diameters connected to headed plate (e.g., 16mm, 19mm and 22mm), the head plate shapes (e.g., circular, square, rectangular), the dimensions of head plates (e.g., area and thickness), the types of welding scheme for connection of reinforcing bars and head plates (e.g., general welding and friction welding). Headed Bars were manufactured in different areas, which shape and thickness are based on ASTM 970-98. Calculation of Embedment length in concrete is based on CSA 23.3-94, and static tensile load was applied. Pullout capacities tested were compared to the values determined using current design methods such as ACI-349 and CCD method. If compare experiment results and existings, Headed bar expressed high strength and bigger breakdown radious than standard by wide plate area and anomaly reinforcing rod unlike anchor.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.588-597
• /
• 2012

This study was to examine Kwa-Jung-ryu, a traditional Korean confectionery, made by head families. We examined the materials and recipes of Kwa-Jung-ryu, which were classified into Yumilgwa, Yugwa, Jeonggwa, Dasikgwa, Yeot-Gangjeong, Dang (Yeot), and others. There were 13 head families that introduced Kwa-Jung-ryu, two each from Gyeonggi-do, Jeolla-do, and Chuncheong-do, and seven from Gyeongsang-do. There are 33 types of Kwa-Jung-ryu, which averages to about 2.5 types per family. But the Pungsan Ryu, Yeoju Lee, and Andong Kwon families introduced the most Kwa-Jung-ryu with 5 types each. The most popular types of Kwa-Jung-ryu were Yumilgwa, introduced by 7 families (Yakgwa by 6 and Maejakgwa by 1), then Jeonggwa by 6 families (Jeonggwa by 3, Pyeon-gang by 1, and Jeonggwa and Pyeon-gang by 2), and Dasikgwa and other Kwa-Jung-ryu by 5 families (Gotgam-mari by 4 and Seopsansam by 1). Classifying Kwa-Jung-ryu by recipe, the most frequently introduced were 8 types of Jeonggwa-ryu, 7 types of Yumilgwa, 5 types of Dasikgwa, 3 types of Yeot-Gangjeong and Dang (Yeot), and 2 types of Yugwa.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.6
• /
• pp.852-866
• /
• 2015

This study analyzes the form of sleeve heads, which is an important internal element that affects the appearance of jacket sleeves. It characterized sleeve head forms by investigating angles, materials, and a combination of formations for 50 sleeve heads. It conducted an appearance evaluation by comparing and analyzing the results. This paper develops a sleeve head appropriately for sleeve construction. The study results are as follows. First, the product was divided into three parts: based on, force receiving, and sleeve cap parts. There were four types of man's sleeve head: straight, arc, and curve A and B types. The woman's sleeve head had two types: straight and curve B type. Second, the feature of each type of sleeve head was analyzed. A straight type emphasized the based on part. An arc type highlighted the force receiving part while the based on part decreased. The sleeve cap part, force receiving part, and based on part were emphasized in the arc type sleeve head. Third, as a result of the appearance evaluation, each type was rank as straight type < arc type ${\leq}$ curve A < curve B. The straight type did not get positive results as it had extra ease when the sleeve head was attached to a Jacket Sleeve. The arc type was evaluated poorly due to an inappropriate sleeve cap composition. The curve type received an excellent overall outcome as it fit into the sleeve cap part well and highlighted the force receiving part in order to minimize front and back wrinkles. Therefore, the curve type made the resemblance of the jacket appearance perfect and closest to the sleeve pattern.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1581-1585
• /
• 2015

Human papillomaviruses (HPVs) remain a serious world health problem due to their association with cervical and head and neck cancers. While over 100 HPV types have been identified, only a few subtypes are associated with malignancies. HPV 16 and 18 are the most prevalent oncogenic types in head and neck cancers. Although it has been proven that some subsets of benign and malignant head and neck lesions are associated with HPV, the general population have very little awareness and knowledge of their association with HPV. Therefore, the purpose of this study was to determine the knowledge of HPV and its links with head and neck benign and malignant lesions in a group of Pakistani dental patients who attended the Dental Department of the Sandeman provincial hospital in Quetta, Pakistan. One hundred and ninety-two patients were recruited and requested to answer a questionnaire. It was revealed that there was a low level of knowledge about HPV and its association with head and neck benign and malignant lesions among the participants. This result suggested that more education regarding the relationship of HPV in inducing head and neck benign and malignant lesions is required in this group of patients.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.271-280
• /
• 2005

There are various types of flap in head and neck reconstruction. We chose the appropriate flap considering the indication and patient's condition. In case of conventional flaps, its type is decided according to the reconstruction site. In other words, the types of considerable flaps are limited in a way. But, perforator flaps can reduce donor limitation and harvest flaps depending on the condition of the recipient. Therefore, the flap is very useful for the head and neck reconstruction needed for 2-dimensional or 3-dimensional reconstruction. We report the 29 cases of perforator-based flap including 8 cases of latissimus dorsi perforator free flap, 5 thoracodorsal perforator free flap, 4 anterolateral thigh perforator free flap, 3 peroneal osteocutaneous perforator free flap and 9 submental perforator island flap for the head and neck reconstruction. Free flaps include 2 cases of chimeric pattern, 7 controlled resurfacing pattern, 4 3-D pattern, 3 dermoadiposal pattern, 1 folded pattern and 3 osteocutaneous pattern. The flaps were successfully used for the head and neck reconstruction. But one patient died during a follow up period because of the recurrence of tumor. Various perforator flaps(island/free pattern) can be highly competitive to the conventional flaps in the head and neck reconstruction, considering a thin character for resurfacing, more flexible and versatile option, variable composition, long pedicle with donor structures saved, and less prominent donor morbidity.

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.159-165
• /
• 2002

Purpose: The aim of this study was to introduce a method of obtaining the oscillation graphs of the dental x-ray tube heads relative to time using an accelerometer. Materials and Methods: An Accelerometer, Piezotron type 8704B25 (Kistler Instrument Co., Amherst, NY, USA) was utilized to measure the horizontal oscillation of the x-ray tube head immediately after positioning the tube head for an intraoral radiograph. The signal from the sensor was transferred to a dynamic signal analyzer, which displayed the magnitude of the acceleration on the Y-axis and time lapse on the X -axis. The horizontal oscillation of the tube head was measured relative to time, and the settling time was also determined on the basis of the acceleration graphs for 6 wall type, 5 floor-fixed type, and 4 mobile type dental x-ray machines. Results : The oscillation graphs showed that tube head movement decreased rapidly over time. The settling time varied with x-ray machine types. Wall-type x-ray machines had a settling time of up to 6 seconds, 5 seconds for fixed floor-types, and 1 I seconds for the mobile-types. Conclusion: Using an accelerometer, we obtained the oscillation graphs of the dental x-ray tube head relative to time. The oscillation graph with time can guide the operator to decide upon the optimum exposure moment after x-ray tube head positioning for better radiographic resolution.