• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.401-414
• /
• 2018

Planing hull type ships are often equipped with interceptor or trim tab to improve the excessive trim angle which leads to poor resistance and sea keeping performances. The purpose of this study is to design a controller to control the attitude of the ship by controllable stern interceptor and validate the effectiveness of the attitude control by the towing tank test. Embedded controller, servo motor and controllable stern interceptor system were equipped with planing hull type model ship. Prior to designing the control algorithm, a model test was performed to identify the system dynamic model of the planing hull type ship including the stern interceptor. The matrix components of model were optimized by Genetic Algorithm. Using the identified model, PID controller which is a classical controller and sliding mode controller which is a nonlinear robust controller were designed. Gain tuning of the controllers and running simulation was conducted before the towing tank test. Inserting the designed control algorithm into the embedded controller of the model ship, the effectiveness of the active control of the stern interceptor was validated by towing tank test. In still water test with small disturbance, the sliding mode controller showed better performance of canceling the disturbance and the steady-state control performance than the PID controller.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.7-11
• /
• 2004

Maritime safety and marine environmental protection are the most important topic in marine society. But, so many marine accidents rave been occurred with the development of marine transportation industry. On the other side, ship is being operated under a highly dynamic environment and many factors are related with ship's collision Nowadays, the increasing tendency to the human errors of ship's collision is remarkable, and the investigation of the human errors has been heavily concentrated. This study analysed on the human errors of ship's collision related to the negligence of lookout and classified basic error type using GEMS(Generic Error Modeling System) dynamic model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.141-148
• /
• 2012

The power system of leisure ship has a character of stand-alone type, so it continuously checks the usable power. Especially, the leisure ship using renewable energy needs to adjust the power consumption of loads according to the usable power. Also, the important loads of leisure ship are different by operation mode. However, current power management system doesnot consider such character. This paper studied load management system of the SPMS(Smart Power Management System) and composed using the smart plug. The SPMS controls the loads depending on a user's pattern and character through variable priority number control. This control algorithm was verified through simulation of assumed user and situation using LabVIEW.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.118-123
• /
• 1999

The mathematical model used in the simulation of ship's maneuvering contains the hydrodynamic coefficients, which are usually evaluated based on PMM model tests in the towing tank and used to predict ship's maneuvering performance when applied to the proto-type ship. The proper mathematical model has to be developed to predict ship's maneuvering motions with hydrodynamic coefficients very well. The mathematical model for PMM model tests is analyzed with identification program and the hydrodynamic coefficients and maneuvering motions by system identification we compared with those obtained directly from PMM model tests and sea trial. The mathematical model for PMM model tests was established and the magnitudes of ship's maneuvering coefficients were determined. When the identified values of coefficients were used to simulate the maneuvers, a very good agreement was obtained between the numerically simulated motion responses and those obtained from PMM model tests.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.467-474
• /
• 2018

The purpose of this study is related to automatic hull-form design for ships operating at two speeds. Research was conducted using a series 60 ($C_B=0.6$) ship as a target, which has the most basic ship hull-form. Hull-form development was pursued from the viewpoint of improving resistance performance. In particular, automatic hull-form design for a ship was performed to improve wave resistance, which is closely related to hull-forms. For this purpose, we developed automatic hull-form design software for ships by combining an optimization technique, resistance prediction technique and hull-form modification technique, appling the software developed to a target ship. A sequential quadratic programming method was used for optimization, and a potential-based panel method was used to predict resistance performance. A Gaussian-type modification function was developed and applied to change the ship hull-form. The software developed was used to design a target ship operating at two different speeds, and the performance of the resulting optimized hull was compared with the results of the original hull. In order to verify the validity of the program developed, experimental results obtained in model tests were compared with calculated values by numerical analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.457-465
• /
• 2018

Since IMO has discussed the effectuation of the EEDI, EEOI and SEEMP, each country, shipping company, shipbuilding company and research institute have been requested to prepare the design, construction and operation of the efficient ship. From the shipbuilding company's point of view, it was necessary to develop a method based on the maneuvering equations of motion in a bid to estimate the EEOI considering the design, model test results and the calculation results of the ship. In this paper, the estimation method of RPM, power and fuel consumption proposed in the previous research was developed to construct a framework that helps in the estimation of the EEOI. It was possible to estimate the EEOI from the estimated ship speed (distance), LNG cargo mass, fuel consumptions and emission factors according to the type of fuel. The rapid increase of the evaluated EEOI was observed when the LNGC with ME-GI engine executing the course changed with a large difference. This prompted the comparison of the type of fuel on the estimated EEOI by considering HFO, LNG fuel and MGO properties.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.290-293
• /
• 2001

The mid-schedule planning of the ship is making a schedule about the process from cutting to erection. The ship consists of lots of blocks. This block has different process because of the shape of the block varies in accordance with the ship-type and the part position of the ship. The type and order of each block process initially must be generated for the mid-schedule planning. In this paper, the process planning, described as above is preparing the basic information before scheduler make a plan with the prepared manhour. The scheduling is done with this process planning which includes the information of the process order. This paper shows the research about three methods to design the process planning. First, investigate the expression method about information of the process planning for the mid-schedule planning in real workplace. Second, design the object of the process planning on the basis of investigating the expression method. Finally, develop the prototype of object on the basis of this designed process planning and then find the practical use in the mid-schedule planning. The object, which is developed in this paper, contains the main algorithm. In case of developing The Mid-Schedule Planning System, this object is expected to be utilized very easily as consisting another object.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.335-339
• /
• 2005

The superconducting electromagnetic propulsion system has been proposed as one of new alternative propulsion systems. Especially, the helical-type propulsion system has the greatest merit that is able to use the solenoid-type superconducting magnets with high magnetic fields. In this study, calculations of characteristics of the large scale helical-type thruster are carried out on the basis of our experimental results. As a couple of results of calculations, it is found that the thruster efficiency quickly increases with the length of electrode up to about 5 m and then goes up to about 0.9. The thruster efficiency peaks at a certain point ($^{\sim}0.6\;m$) and then falls as length of pitch increases.

• Journal of the Society of Disaster Information
• /
• v.7 no.1
• /
• pp.75-85
• /
• 2011

In this study, the behavior were analyzed for the bow collision event. The model of protective Structure was consist of slab, RCP and non-linear soil spring. The ship was modeled by bow and midship. The bow model was composed by elastic-plastic shell elements, and the midship was composed by elastic solid element. According to the weight of the ship's change from DWT 10000 until DWT 25000 increments 5000. The head-on collision was assumed, its speed was 5knot. Analysis was carried out ABAQUS/Explicit. As the result, increasing the weight of the ship deformability in athletes and to increase the amount of energy dissipated by the plastic could be confirmed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.169-177
• /
• 2019

It is very important to understand the intention of a target ship to prevent collisions in multiple-ship situations. However, considering the intentions of a large number of ships at the same time is a great burden for the officer who must establish a collision avoidance plan. With a distributed algorithm, a ship can exchange information with a large number of target ships and search for a safe course. In this paper, I have applied a Distributed Stochastic Search Algorithm (DSSA), a distributed algorithm, for ship collision avoidance. A ship chooses the course that offers the greatest cost reduction or keeps its current course according to probability and constraints. DSSA is divided into five types according to the probability and constraints mentioned. In this paper, the five types of DSSA are applied for ship collision avoidance, and the effects on ship collision avoidance are analyzed. In addition, I have investigated which DSSA type is most suitable for collision avoidance. The experimental results show that the DSSA-A and B schemes offered effective ship collision avoidance. This algorithm is expected to be applicable for ship collision avoidance in a distributed system.