• Human Ecology Research
• /
• v.60 no.3
• /
• pp.377-390
• /
• 2022

This study identified and compared family values within and across different generations concerning gender roles, attitudes toward diverse families, children, and parental roles. Data were obtained from the 2020 Seoul Family Report Survey. There were 1,949 study subjects, including first- and second-generation baby boomers and individuals in generations X, Y, and Z in Korea. Latent profile analyses were conducted using M-plus. Perceptions and views concerning family values were classified into different types. The main findings were as follows. Two types were identified among first baby boomers, and three were identified among second baby boomers. Most of the first and second baby boomers belonged to the "moderate" type. Two types were detected among those in Generation X. Regarding gender roles, most views of Generation X were slightly progressive, while their other family values were more moderate. Three types were identified among those in Generation Y: "progressive," "moderate," and "very liberal." Generation Z was identified as a "progressive" group. This study provides basic data to explore the direction of the coexistence of generations by identifying and comparing diverse family values within and across generations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.389-394
• /
• 2014

Two evolutionary gait generation methods for Cartesian and Joint coordinates space are compared to develop a fast locomotion for quadruped robots. GA(Genetic Algorithm) based approaches seek to optimize a pre-selected set of parameters for the locus of paw and initial position in cartesian coordinates space. GP(Genetic Programming) based technique generate few joint trajectories using symbolic regression in joint coordinates space as a form of polynomials. Optimization for two proposed methods are executed using Webots simulation for the quadruped robot which is built by Bioloid. Furthermore, simulation results for two proposed methods are analysed in terms of different coordinate spaces.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2472-2474
• /
• 2002

This paper describe a trajectory generation method for a two-wheeled mobile robot using cubic Bezier curve. It is proposed that the method to determine the location of control points which mainly affect the shape of curve, and constrains for two-wheeled mobile are examined. Simulation results show its traceability of the trajectory of mobile robot.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.743-747
• /
• 2015

In this paper, the power generation efficiency of the 4 [kW] fixed-concentrated type photovoltaic power generation system and that of the 4 [kW] single axis trace type photovoltaic power generation system were compared. For that purpose, the two types of photovoltaic power generation systems have been in operation for 1 year on an experimental basis. The amounts of power generated by the two types during the months of January through December and the characteristics of their operating times during the same period have been compared and analyzed. For the study, the type with higher efficiency was selected and the following conclusions have been reached. It was shown that the amount of power generated and the average operation times during the spring months of March through May are higher that those of the summer months of June through August when more sunlight is available. The reason for this phenomenon is thought to be that as the temperatures of the solar panel surface and the surrounding environment go up, the electric current decreases.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.984-988
• /
• 2010

In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.378-386
• /
• 2012

For reduction of the amount of CO2 emitted from ships, power generation characteristics of two power generation systems consisting of a high-efficiency permanent magnet synchronous generator and diode bridge rictifiers are discussed in this paper. One of the discussed systems has three-phase stator windings, and the other has two sets of three-phase (six-phase) stator windings to reduce pulsation in the electromagnetic torque and DC current. Experimental results reveal that the power generation efficiency of the system having six-phase stator windings is higher than that of the system having three-phase stator windings for a light load. The maximum power generation efficiency of the system having six-phase stator windings is almost the same as that of the system having three-phase stator windings. For the electromagnetic torque of the system having six-phase stator windings, the width of pulsation is about one-fifth compared to the system having three-phase stator windings.

• Wind and Structures
• /
• v.21 no.1
• /
• pp.63-84
• /
• 2015

The shape of a tall building has significant impact on wind force generation and wind-induced dynamic response. To study the effect of recessed cavities, wind excitations on a wind-tunnel model of an H-section tall building were compared with those on a square-section building model. Characteristics of the fluctuating wind pressures on the side faces of the two tall buildings and their role in the generation of crosswind forces on the buildings were investigated with the space-time statistical tool of proper orthogonal decomposition (POD). This paper also compares the use of different pressure data sets for POD analysis in situations where pressures on two different surfaces are responsible for the generation of a wind force. The first POD mode is found to dominate the generation of crosswind excitation on the buildings.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.136-140
• /
• 2001

The 3rd generation mobile telecommunication fields are being standardized and developed in two parts, 3GPP and 3GPP2. These two parts have established each Network Architecture Models to achieve the goals basically required in the 3rd generation and to make it progress to IP network in the future. To achieve these goals many system architectures are proposed. Not only functional aspects but also performance aspects are considered as major factors. This paper proposes a new method of performance evaluation modeling and simulation that improved the existing way. The method proposed in this paper is Aspect oriented logical performance analysis Modeling and Simulation method. This proposed method is expected to improve efficiency of performance analysis modeling and simulation on the 3rd generation mobile telecommunication system.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.4
• /
• pp.270-277
• /
• 2003

In two dimensional mechanical design analysis, quadrilateral element mesh is preferred because it provides more accurate result than triangular element mesh. However, automation of quadrilateral element mesh generation is much more complex because of its geometrical complexities. In this study, an automatic quadrilateral element mesh generation algorithm based on the boundary normal offsetting method and the boundary decomposition method is developed. In so doing, nodes are automatically placed using the boundary normal offsetting method and the decomposition method is applied to decompose the designed domain into a set of convex subdomains. The generated elements are improved by relocation of the existing nodes based on the four criteria - uniformity, aspect ratio, skewness and taper degree. The developed algorithm requires minimal user inputs such as boundary data and the distance between nodes.

• Water for future
• /
• v.12 no.2
• /
• pp.63-69
• /
• 1979

The sequences of monthly streamflows constitute a non-statonary time series. The purely stochastic model has been applied to data generation of non-stationary time series. Tow different mothods--single site and multisite generation--have been used on the hydrologic time series. In this study the synthetic generation method by bivariate analysis, studied by Thomas Fiering, one of multi-site models, has been applied to the historical data on monthly streamflows at two sites in Nakdong River, and also for validity of this model the single site Thomas Fiering model applied. Through statistical analysis it has been shown that the performance of bivariate Thomas Fiering model was better than that of the other. By comparison of mean and standard deviaion between the historical and the generated, and cross correlogram interpretation, it has been known that the model used herein has good performance to simultaneously generate the monthly streamflows at two sites in a river hasin.