• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1135-1138
• /
• 1990

In this paper, we study the pole assignment problem for three-dimensional systems. We transform the denominator of transfer functions of the closed-loop system into the product of three stable one-dimensional polynomials, by performing two-dimensional dynamical feedback and input transformation on the given three-dimensional systems. In the next, we consider the possibility that these two-dimensional dynamic compensators are realizable, thoroughly, and propose the counter-measure in case that they are not realizable. And, we obtain the conditions so that the closed-loop three-dimensional systems are stable. Moreover, we calculate the dynamical dimension which is necessary for the pole assigntmnt, and suggest the pole assignmnt method with the lowest dynamical dimnsion.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.927-935
• /
• 2005

In the present paper the dynamics of the structure varying multibody systems caused by stick-slip motion with two-dimensional dry friction are analyzed. The methods to determine friction force both in stick and slip states are described. The direct method of considering the wagon bogie system as a structure varying system was used to consider two dimensional friction at the wheelset-side frame connection. The concept of friction direction angle used to determine the friction force components of two-dimensional dry friction both in the stick and slip motion states was used. A speed depended friction coefficient was used and described approximately by hyperbolic secant function. All switch conditions were derived and friction forces both for stick and slip states. Some simulation results are provided.

• 한국통신학회논문지
• /
• 제15권8호
• /
• pp.659-666
• /
• 1990

최근에 이산치 2차원 시스템을 기술하는 여러가지 상태공간모델이 제안되어 왔다. 본 논문에서는 Roesser가 제안한 상태공간모델을 근거로 상태궤환을 이용하여 2차원 시스템의 극배치 문제를 고찰한다. 극배치 설계는 2단계로 나누어 1단계에서는 변환된 시스템의 비대각 행렬(off diagonal matrix)을 0으로 하는 조건을 유도하고 2단계에서는 2차원 시스템의 극배치 문제가 2개의 1차원 시스템의 극배치 문제도 된다는 것을 보여준다. 마지막으로 극배치 기법을 설명하기 위한 예를 들었다.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1170-1174
• /
• 2014

This paper suggests using the ICP (Iterative Closet Point) algorithm to compensate a two-dimensional map. ICP algorithm is a typical algorithm method using matching distance data. When building a two-dimensional map, using data through the value of a laser scanner, it occurred warping and distortion of a two-dimensional map because of the difference of distance from the value of the sensor. It uses the ICP algorithm in order to reduce any error of line. It validated the proposed method through experiment involving matching a two-dimensional map based reference data and measured the two-dimensional map.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.782-785
• /
• 1988

A two-dimensional positioning system by use of an M-array is proposed. An M-array pattern, which is known as one of the two-dimensional pseudorandom array, is attached on an object to be positioned. The M-array pattern is observed by a TV camera and crosscorrelated with the reference M-array. The maximum of the two-dimensional crosscorrelation function is sought by two-dimensional servo system. This method of positioning can be used in very noisy circumstances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1130-1134
• /
• 1990

In this paper, we propose a mthod to decouple the multi-input multi-output two-dimensional system. Then, we analyze the realization dimension of the feedback, feedforward given to decouple. Moreover, we consider the possibility of the reduction of the dynamical dimension needed to decouple. Besides, in order to stabilize the decoupled two-dimensional system, we suggest a method to assign the poles of each entry of the transfer function matrix to the desired positions.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.376-382
• /
• 2000

A problem of relevant interest to some industries is that of the optimum two-dimensional layout. In this problem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the shapes out of the sheets in such a way as to minimize the amount of waste produced. In this paper, we propose a genetic algorithms using rotation parameters by which the best pattern of layout is found.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.295-298
• /
• 1995

In this paper, one simple technique to calibrate the system setting of the three-dimensional measuring system is presented. Due to this technique, the three-dimensional shape of the huge structures and the buildings can be readily obtained. This technique is applied to the three-dimensional landscape simulation. Two examples are shown in this paper.

• Smart Structures and Systems
• /
• 제32권2호
• /
• pp.101-109
• /
• 2023

In order to improve the measurement accuracy of the 6-dimensional accelerometer, the cross coupling compensation method of the accelerometer needs to be studied. In this paper, the non-linear error caused by cross coupling of piezoelectric six-dimensional accelerometer is compensated online. The cross coupling filter is obtained by analyzing the cross coupling principle of a piezoelectric six-dimensional accelerometer. Linear and non-linear fitting methods are designed. A two-level calibration hybrid compensation algorithm is proposed. An experimental prototype of a piezoelectric six-dimensional accelerometer is fabricated. Calibration and test experiments of accelerometer were carried out. The measured results show that the average non-linearity of the proposed algorithm is 2.2628% lower than that of the least square method, the solution time is 0.019382 seconds, and the proposed algorithm can realize the real-time measurement in six dimensions while improving the measurement accuracy. The proposed algorithm combines real-time and high precision. The research results provide theoretical and technical support for the calibration method and online compensation technology of the 6-dimensional accelerometer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.633-636
• /
• 2000

The decoupling of the systems is to let the inputs and outputs correspond one to one, by performing the state feedback or the output feedback on the given systems. In this paper, we propose a method for decoupling the separable-denominator two-dimensional systems. And, we study about the realization dimension of the dynamical feedback and the dynamical feedforward performed for decoupling.