• 한국결정학회지
• /
• 제15권1호
• /
• pp.5-8
• /
• 2004

Copper(I) bromide(CuBr) 와 pyrazine($C_4H_4N_2$, pyz)의 수열 반응으로 2차원 배위 고분자 [CuBr(pyz)] (1)이 얻어졌다. X-ray 구조 결정 결과, 고분자 1은 4.0${\times}$5.7 ${\AA}$ 크기를 갖는 직사각형 격자들을 토대로 한 2차원 그물 망 구조를 갖고 있었다. 고분자 1은 b-축 방향으로 통로(channel)를 갖고 있다.

• Advances in Computational Design
• /
• 제5권2호
• /
• pp.111-125
• /
• 2020

The flow behavior of polymer melts within a slit die is an important consideration when designing a die geometry. The quality of the extruded polymer product can be determined through an evaluation of the flow homogeneity, wall shear rate and pressure drop across the central height of the die. However, mathematical formulations cannot fully determine the behavior of the flow due to the complex nature of fluid dynamics and the nonlinear physical properties of the polymer melts. This paper examines two slit die geometries in terms of outlet velocity uniformity, shear rate uniformity at the walls and pressure drop by using the licensed computational fluid dynamics package, Ansys POLYFLOW, based on the finite element method. The Carreau-Yasuda viscosity model was used for the rheological properties of the polypropylene. Comparative analysis of the simulation results will conclude that the modified die design performs better in all three aspects providing uniform exit velocity, uniform wall shear rates, and lower pressure drop.

• 한국결정학회지
• /
• 제12권4호
• /
• pp.212-215
• /
• 2001

NaOAC·3H₂O 존재 하에서, manganese nitrate(Mn(NO₃)₂·H₂O )와 imidzole-4,5-dicarboxylic acid(IDCH₂)가 수열반응하여, 실험식 [Mn(IDC)(H₂O)]을 가지는 2차원 배위고분자 합성되었다. 화합물 1의 구조가 분광학적 방법(IR) 및 X-ray 회절법으로 규명되었다. 화합물의 1의 결정학적 자료: 사방정계 공간군 Pbca, a=7.257(5) Å b=13.687(5)Å, c=14.332(6)Å Z=8, R(wR₂)=0.0498(0.0999).

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.948-952
• /
• 2002

Three-dimensional terbium coordination polymers with the formulas of [Tb4(NDC)6(H2O)5]${\cdot}$2H2O (1) and [Tb2(BPDC)3(H2O)3]${\cdot}$H2O (2) (NDC = 2,6-naphthalenedicarboxylate; BPDC = 2,2'-bipyridine-4,4'-dicarboxy-late) were prepared by hydrothermal reactions. Both compounds were structurally characterized by X-ray diffraction. Compound 1 has a polymeric structure that contains four distinct Tb metals. Three Tb metals have a square-antiprismatic structure, and the remaining one has a 9-coordinate, triply capped trigonal-prismatic structure. Compound 2 is also a polymer with two distinct Tb metals, both of which have a square-antiprismatic structure. The pyridine nitrogen atoms of the BPDC 2- ligand do not coordinate to the metal centers in compound 2.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.7-13
• /
• 2018

This study investigates the enhancement of the oxygen diffusion rate in the cathode channel of a proton exchange membrane fuel cell (PEMFC) by pure oscillating flow, which is the same as the mechanism of human breathe. Three-dimensional numerical simulation, which has the full model of the fuel cell including electrochemical reaction, ion and electronic conduction, mass transfer and thermal variation and so on, is performed to show the phenomena in the channel at the case of a steady state. This model could analysis the oscillating flow as a moving mesh calculation coupled with electrochemical reaction on the catalyst layer, however, it needs a lot of calculation time for each case. The two dimensional numerical simulation has carried on for the study of oscillating flow effect in the cathode channel of PEMFC in order to reduce the calculation time. This study shows the diffusion rate of the oxygen increased and the emission rate of the water vapor increased in the channel by oscillating flow without any forced flow.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.136-142
• /
• 2007

Precise fabrication of three-dimensional (3D) self-standing microstructures on thin glass plates via two-photon induced polymerization (TPP) has been an important issue for innovative 3D nanodevices and microdevices. However, there are still issues remaining to be solved, such as building 3D microstructures on opaque materials via TPP and being able to implant them as functional parts onto practical systems. To settle these issues simply and effectively, we propose a contact print lithography (CPL) method using an ultraviolet (UV)-curable polymer layer. We report some of the possibilities and potential of CPL by presenting our results for transplanting 3D microstructures onto large-area substrates and also our examination of some of the effects of the process parameters on successful transplantation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.207-217
• /
• 2010

The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

• 폴리머
• /
• 제31권2호
• /
• pp.160-167
• /
• 2007

이 논문은 하나의 좌표축과 하나의 종횡비$(\rho_\alpha=a_1/a_3)$를 갖는 2차원적 형태의 섬유 형태$(a_1>a_2=a_3)$ 그리고 디스크 형태$(a_1=a_2>a_3)$의 충전제의 기하학적 형상에 따른 복합체의 열팽창 계수의 변화를 예측하기 위한 모델을 제시한다. 분석은 Eshelby의 equivalent 텐서의 일반적인 접근과 Lee와 Paul의 접근 방식을 이용하여 이미 개발된 탄성 모듈러스의 전개 과정을 따른다. 배열된 등방성 충전제를 포함하는 복합체의 열팽창 계수의 영향이 종횡비에 따라 조사되었다. 이 모델은 복합체를 해석하기 위해서 한쪽 방향으로 배열된 충전제이어야 하며, 균일한 물성의 기지재와 충전제가 완전한 결합을 하고 있다는 가정 하에서 연구된다. 복합체의 열팽창 계수는 배열된 종단방향$(\alpha_{11})$과 횡단방향$(\alpha_{33})$으로 조사되었다. Chow와 Tandon 그리고 Weng이 발표한 에폭시 수지와 유리 섬유의 복합체의 재료특성 데이터로부터 종횡비에 따른 열팽창 값을 얻을 수 있었다. 종횡비가 증가함에 따라 길이 방향의 열팽창 계수 $\alpha_{11}$는 감소하여 충전제의 열팽창 계수에 접근한다. 그러나, 횡단방향의 열팽창 계수 $\alpha_{33}$는 증가 또는 감소하는 경향을 보인다. 충전제의 함량이 증가함에 따라 복합체의 열팽창 계수는 감소하여 충전제의 열팽창 계수에 수렴한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2250-2254
• /
• 2007

Comprehensive analytical models focusing on the anode water loss, the cathode flooding, water equilibrium, and water management strategy are developed for polymer electrolyte fuel cells. Analytical solutions presented in this study are compared with two-dimensional computational results and shows a good agreement in predicting those critical characteristics of water. General features of water concentration profile as a function of membrane thickness and current density are presented to illustrate the net effect of the back-diffusion of water from the cathode to anode and the water production by the cathode catalytic reaction on water transport over a fuel cell domain. As one of practical applications, the required humidity level of feed streams for full saturation at the channel outlets are investigated as a function of the physical operating condition. These analytical models can provide good understanding on the characteristic water

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.470-473
• /
• 2010

Graphene, consisting of a single layer of carbon in a two-dimensional lattice, has been emerging as a fascinating material with many unique physical, chemical and mechanical properties. In this study, graphenes were prepared by a chemical method. To develop high performance polymer nanocomposites reinforced by graphenes, adequate dispersion of the fillers and strong interfacial bonding between the fillers and the polymer matrix are essential. The purpose of this study was to examine the influence of introducing amine groups on the surfaces of graphenes. FT-IR spectroscopy, SEM were used to confirm the functionalization. Epoxy nanocomposites comprising the graphenes were prepared and their characteristics were investigated by DSC, DMA and TMA. Fracture surfaces of the nanocomposites were investigated by SEM. The functionalized graphenes induced strong interfacial bonding than the pristine graphenes and resulted in considerable improvements in the performance of the nanocomposites.