• YAKHAK HOEJI
• /
• v.51 no.1
• /
• pp.51-55
• /
• 2007

Among pteridophytes, Selaginella involvens Spring and Equisetum orvense L. are used in folk medicine in Eastern Asian countries including Korea. The water extracts from Selaginella involvens spring (SW) and from Equistum arvense L (EW) did not affect viability of human umbilical vein endothelial cells (HUVECs). However, SW dose-dependently inhibited tube formation and migration of HUVECs, whereas EW did not. These results suggest that the water extract from Selaginella involvens Spring may have anti-angiogenic activity.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.123-138
• /
• 2004

The video phone tube (VPT) of monochrome CRT have utilized home door phone, fish-finder and the rear watch monitors. Phosphor screen formation is made by electrodeposition spin coating and thermal transfer methods etc. Recently, thermal transfer method was developed, as a novel method, to form the phosphor surface for mnonchrom VPT. This method have advantages of simple process, automatization, clean environment, saving raw material and saving running-cost. In this study, it was developed new phosphor of VPT, and tested about phosphor paste properties. An experimental studies of VPT as a new phosphor property and improved VPT's manufacturing process shortening and brightness. As thermal transper method is a paste processing, it is important that rheology of phosphor effects on the formation of phosphor screen. Hence this paper was studied rheology properties of phosphor paste and the formation of phosphor screen had looked most suitable condition. Experimented thermal separation properties of low calcination temperature resin and the result analyzed comparison by TGA. Also, examined calcination properties to reduce remaining binder phosphor.

• Journal of the Korean Society of Visualization
• /
• v.6 no.1
• /
• pp.47-52
• /
• 2008

The present study has focused on the characteristics of droplet formation from an inkjet nozzle driven by a piezoelectric actuator. As an operating fluid, ethylene glycol was used and the physical properties of it such as viscosity, surface tension, contact angle and shear stress were measured. During the experiments, various temperatures and driving voltages are imposed on a capillary tube. These conditions result in a proper drive condition or an overdrive condition. In case of the proper drive condition, an image processing technique is applied to measure the diameter of a single free drop. As a result, the size of droplet is increased when the driving voltage is increased from 160 V to 190 V at 25$^{\circ}C$ In the overdrive condition where temperature or driving voltage becomes higher than the proper drive condition, satellites and the misdirected jets happen.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.4
• /
• pp.310-313
• /
• 2006

Although lipomyelomeningocele and dermoid cyst are formed during a similar embryologic developmental stage of 'neural tube formation', they are caused by entirely different embryologic mechanisms. We encountered a case, which has not been previously reported, that had a lumbar subcutaneous dermoid cyst associated with lipomyelomeningocele. A 52-year-old man presented with a slowly growing lumbar mass of 3 years duration, which had been present since birth. Lumbosacral magnetic resonance imaging[MRI] showed lipomyelomeningocele at the L3, 4 and 5 levels and a subcutaneous cystic mass of high signal intensity on the T2 weighted image and iso or low signal intensity on the T1 weighted image. He underwent total resection of the lumbar subcutaneous mass. Intraoperative findings and histological examination were consistent with the preoperative diagnosis of a 'dermoid cyst'. We demonstrate that the formation of a dermoid cyst might coexist with lipomyelomeningocele during the embryologic developmental stage.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1822-1827
• /
• 2019

Mechanical responses and failure behaviors of advanced C/C composite tube are very important for structural component design in nuclear reactor. In this study, an experimental investigation was conducted to study mechanical properties of C/C composite tube. Quasi-static compression loading was applied to a type of advanced composite tube to determine the response of the quasi-static load displacement curve during progressive damage. Acoustic emissions (AE) signals were captured and analyzed to characterize the crack formation and crack development. In addition, the crack propagation of the specimens was monitored by imaging technique and failure mode of the specimen was analyzed. FEM is appled to simulate the stress distribution. Results show that advanced C/C composite tube exhibits considerable energy absorption capability and stability in load-carrying capacity.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.252-257
• /
• 2007

The present study investigated the effect of air velocity on frost formation of slit fin-and-tube heat exchanger under frosting condition. The slit fin-and-tube heat exchanger with outer tube diameter 7.0mm and 1 row was used. Air side pressure drop, photographs of frost distribution, frost accumulation and frost thickness were presented with respect to the frosting time. In the early stage of experiment, the case with air velocity of 1.5m/s showed 403% higher for the air pressure drop than the case with the air velocity of 0.5m/s. As the frost was accumulated, the effect of air velocity on air pressure drop was decreased. In the end stage of test, air pressure drops of two cases were very close and air pressure drop for the air velocity of 0.5m/s was higher than that of 2.0m/s. It was also shown in the photographs of frost distribution, frost accumulation and frost thickness. From frost thickness, fanning friction factor was presented.

• ALGAE
• /
• v.24 no.1
• /
• pp.39-45
• /
• 2009

The conjugation processes of a filamentous freshwater green alga Spirogyra varians were examined using FITC-lectins. Conjugation comprised five steps: 1) aligning with adjacent filaments, 2) formation of conjugation protru-sion (papilla), 3) fusion of the protrusions, 4) formation of conjugation tube,and 5) formation of zygotes. Three lectins, ConA, RCA and UEA, showed considerable labeling during the progression of conjuation. FITC-ConA labeled the surfaces of filaments throughout the whole conjugation processes. FITC-RCA labeling was observed at the conjugation protrusions only after the papilla formation. Strong labeling continued until formationg of zygotes at the contacting area where the conjugation tube developed, but no labeling was detected on the surface of vegetative filaments. The labeling decreased gradually over time and disappeared when zygotes were formed. FITC-UEA showed similar labeling pattern with FITC-RCA except that weak labeling remained after zygote formation. Inhibition experiments using RCA, UEA which are complementary to sugars L-fucose and D-galactose, showed considerable decrease of conjugation (<32% vs. 70% in control). These results suggested that the lectin-carbohydrate recognition system might be involved in the conjugation of spirogyra varians.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.727-738
• /
• 2020

This study focused on popular YouTube subculture content and male YouTuber characteristics. We conducted a case study on YouTube videos and viewer's comments of male YouTubers who interacted with subculture or fashion themes within YouTube. Based on Dick Hebdige's subculture theory, we categorized male subculture characteristics of style expression to show how YouTube plays a role in the formation of subculture. The representative types of male subculture were divided into metro sexual, adolescent boys, drag queen, and homosexual. YouTube simultaneously played a role in accumulating video viewing as well as indirect experiences in various communication activities and cultures among viewers. YouTube was used as a space for video producers as well as viewers and subscribers to discover and build identity. Subculture makes people aware of cultural diversity within society, and their doubles and lifestyles serve as important clues to track culture and fashion changes. This research is significant in the field of fashion media and subculture research due to its examination of male subculture phenomenon on YouTube based on an analysis of the video content of culture insiders and viewers' comments as well as immediate responses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.189-197
• /
• 1997

The vaporizing characteristics of LNG(liquefied natural gas) via heat exchanger with sea water are analytically studied for an open rack vaporizer(ORV). This study is intended to supply the design data for the domestic fabrication of the corrosion-resistant vaporizer tube. A computational program is developed to predict the exit temperature of LNG for various conditions. In the program, thesimple and justifiable heat transfer models are selected for fully-developed internal flow of LNG, the star-shaped finned-tube, and the external falling films of sea water, as well as the possible ice formation and the fouling on the tube walls. It is found that the enongh corrugation inside of the tube wall is the most significant in the vaporizer performance for the current operating conditions. the effects of other design parameters on the heat exchanger between LNG and sea water are quantitatively presented.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.68-73
• /
• 2011

This study was performed numerical analysis in order to analyze liquid film flow of heat exchanger tube arrangement and configuration of evaporative multi effect distillation system using medium-temperature. Simulation was accomplished the two-dimensional calculations using commercial analyses program FLUENT based on the FVM(finite volume method). Fresh water generator of this study used Shell & Tubes heat exchanger with Cu_Ni tube, configuration of tube used bare tube and corrugated tube, and arrangement of tube used in-line array and staggered array. Performance of heat exchanger through the formation of liquid film was compared and analyzed. Liquid film flow occurred that falling on heat exchanger tube wall. Result of simulation showed that liquid film thickness of in-line arrangement was found 0.57mm with bare tube and 0.67mm with corrugated tube, respectively. And liquid film thickness of staggered arrangement was found 0.39mm with bare tubes and 0.62mm with corrugated tubes, respectively. Liquid film thickness of corrugated tube showed thicker than bare tube, but heat transfer rates of corrugated tube showed higher than bare tube. The reason was considered that surface area of corrugated tube was wider than bare tube. And liquid film thickness of staggered arrangement showed thinner than in-line arrangement, so thermal performance of staggered arrangement showed higher than in-line arrangement.