DOI QR코드

DOI QR Code

Failure behaviors of C/C composite tube under lateral compression loading

  • Gao, Yantao (Shanghai Institute of Applied Physics, Chinese Academy of Sciences) ;
  • Guan, Yuexia (Shanghai Institute of Applied Physics, Chinese Academy of Sciences) ;
  • Li, Ke (Shanghai Institute of Applied Physics, Chinese Academy of Sciences) ;
  • Liu, Min (Shanghai Institute of Applied Physics, Chinese Academy of Sciences) ;
  • Zhang, Can (Shanghai Institute of Applied Physics, Chinese Academy of Sciences) ;
  • Song, Jinliang (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)
  • Received : 2018.12.03
  • Accepted : 2019.05.27
  • Published : 2019.10.25

Abstract

Mechanical responses and failure behaviors of advanced C/C composite tube are very important for structural component design in nuclear reactor. In this study, an experimental investigation was conducted to study mechanical properties of C/C composite tube. Quasi-static compression loading was applied to a type of advanced composite tube to determine the response of the quasi-static load displacement curve during progressive damage. Acoustic emissions (AE) signals were captured and analyzed to characterize the crack formation and crack development. In addition, the crack propagation of the specimens was monitored by imaging technique and failure mode of the specimen was analyzed. FEM is appled to simulate the stress distribution. Results show that advanced C/C composite tube exhibits considerable energy absorption capability and stability in load-carrying capacity.

Keywords

Acknowledgement

Supported by : Natural Science Foundation of Shanghai, National Science Foundation

References

  1. E. Fitzer, The future of carbon-carbon composites, Carbon 24 (2) (1987) 163-190. https://doi.org/10.1016/0008-6223(86)90112-0
  2. J. Sumtita, T. Shibata, E. Kunimoto, M. Yamaji, T. Konishi, K. Sawa, Investigation of microstructural change by X-ray tomography and anisotropic effect on thermal property of thermally oxidized 2D-C/C composite for very high temperature reactor, J. Nucl. Sci. Technol. 47 (4) (2010) 411-420. https://doi.org/10.1080/18811248.2010.9711971
  3. Gooch J., Carbon-carbon composite. In: Gooch J.W. (eds) Encyclopedic Dictionary of Polymers. Springer, New York, NY
  4. L. Snead, Y. Katoh, K. Ozawa, Stability of 3-D carbon fiber composite to high neutron fluence, J. Nucl. Mater. 417 (2011) 629-632. https://doi.org/10.1016/j.jnucmat.2010.12.099
  5. L. Snead, T. Burchell, Y. Katoh, Swelling of nuclear graphite and high quality carbon fiber composite under very high irradiation temperature, J. Nucl. Mater. 381 (2008) 55-61. https://doi.org/10.1016/j.jnucmat.2008.07.033
  6. J. Zhang, R. Luo, Q. Xiang, C. Yang, Compressive fracture behavior of 3D needle-punched carbon/carbon composites, Mater. Sci. Eng. A 528 (2011) 5002-5006. https://doi.org/10.1016/j.msea.2011.03.055
  7. D. Li, G. Luo, Q. Yao, N. Jiang, L. Jiang, High temperature compression properties and failure mechanism of 3D needle-punched carbon/carbon composites, Mater. Sci. Eng. A 621 (2015) 105-110. https://doi.org/10.1016/j.msea.2014.10.060
  8. J. Sumita, T. Shibata, E. Kunimoto, M. Yamaji, T. Konishi, K. Sawa, Correlation of microstructure and compressive strength of C/C composite using X-ray tomography, IOP Conf. Ser. Mater. Sci. Eng. 18 (2011) 162012. https://doi.org/10.1088/1757-899X/18/16/162012
  9. K. Liao, J. Lesko, W. Stinchcomb, K. Reifsnider, T. Dunyak, An Axial/Torsional Test Method for Ceramic Matrix Composite Tubular Specimens, vol. 105, Wiley-Blackwell, 2008, pp. 18391-18405. A8.
  10. R. Carter, Characterizing the Mechanical Properties of Composite Materials Using Tubular Samples (Dissertation), The Virginia Polytechnic Institute and State University, 2001.
  11. H. Zhao, L. Zhang, B. Chen, Z. He, J. Zhang, Y. Liu, The effects of fiber orientation on failure behaviors of 2D C/SiC torque tube, J. Eur. Ceram. Soc. 37 (2017) 4323-4330. https://doi.org/10.1016/j.jeurceramsoc.2017.04.024