• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.153-158
• /
• 2000

The sway motion of the spreader during and after movement causes an efficiency problem of position control in unmaned gantry crane. The objective of this research is to investigate the phenomenon that the load is taken by the sway motion of crane. For deriving the dynamic equations related to the swing motion of crane, we introduced a conception of spring and damper in the upper part of the crane. During the crane and trolley is driving along the velocity profile, the swing motion of the spreader and crane will be simulated. The simulation result of the equation of motion using the Runge-Kutta method is presented in this paper. And we will show an effect of the swing of the crane in this research.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.216-218
• /
• 2007

세계 선진항만은 해운물류시장의 변화에 대응하고, 경쟁력 확보 방안으로 첨단 자동화 장비와 운영시스템 도입을 통한 자동화를 지향하고 있다. 국내 부산항 신항 또한 자동화 컨테이너터미널로 개발을 추진하고 있는 것으로 알려져 있다. 자동화 터미널은 각종 자동화 장비와 시스템이 유기적으로 구성되어 있으며, 이들의 효율적인 운영을 통해 생산성을 향상시킬 수 있다. 터미널의 안벽과 장치장 사이의 컨테이너 운송을 담당하는 이송장비는 컨테이너터미널의 핵심장비로 이의 효율적인 운영은 컨테이너터미널의 생산성과 직결되어 있다. 본 연구에서는 자동화 컨테이너터미널의 운영생산성 향상을 위한 하역장비와 이송장비의 운영방안에 대하여 연구한다. 특히 DHST(Dual Hoist Second Trolley)타입의 QC와 ASHC의 장비특성과 장비간의 연계작업을 고려하여, QC의 대기시간을 최소화하여 하역 생산성을 최대화할 수 있는 ASHC Dispatching Rule을 제시하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.319-320
• /
• 2006

At this study, one of the electrical problems, arc characteristics according to loss of contact between a pantograph and a catenary, was analyzed. A characteristic of arc current is disappeared in a short period of time. Nevertheless, it has large current same as a surge, so that it has EMI/EMC problems. In the case of the electrical railway system, there is oscillation and de-wiring. The are current is generated by these problems. The result of this study can be used as a facility design to prevent a surge and needs to prove through actual field data in the main circuit of an electric train for a precise analysis about effect of are.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.555-558
• /
• 1995

In designing the anti-sway controller for crane system in the industrial field, one of the basic problem is to keep the stability of system, even if the mathematical model of the plant is not exact and disturbance exists. Form this point of view, a two-degree-of-freedom(2DOF) servo controller effact to the system in which the integral compensation is effctive only when a modeling error and/or a disturbance input exist. In this paper, the change of load weight and variation of wire rope length considered as the structured uncertainty, and design the 2DOF servo contorller using independently the informations of reference signal and control output with both feedforward and feedback. The effectivenss is proved through the results for the anti-sway system in the system with the position control of trolley.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.16-21
• /
• 2000

In this paper we design a GA-fuzzy controller for position control and anti-swing at the destination point. Applied genetic algorithm is used to complement the demerit such as the difficulty of the component selection of fuzzy controller namely scaling factor membership function and control rules. lagrange equation is used to represent the motion equation of trolley and load in order to obtain mathematical modelling. Simulation results show that the proposed control technique is superior to a conventional optimal control in destination point moving and modification.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.958-965
• /
• 2007

The spreaders on container cranes are usually controlled to stop at the same time as their trolleys are stopped. Despite the use of adequate control systems, however, the spreaders usually have comparatively large sway movements, due to their suspension from the trolleys through cables. It is, therefore, important to accurately measure the attitudes of the spreaders, in order to suppress such sways by means of secondary control. Until now, most of conventional anti sway control systems focus on the direct control of the movements of trolleys. which seems not suitable to speed up the entire process - loading and unloading of containers. In this paper, we suggest a new anti sway control system: By using extra equipments - two propellers to suppress the sway and a PSD camera to measure the spreader's attitude - installed on the spreader and the trolley. the sway of the suspended load j, considerably suppressed. The effectiveness of the proposed scheme is verified by the computer simulation and experiment with the miniature of the container crane system.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.23-29
• /
• 1997

In the control of crane system, the traversing time of the trolley must be reduced as much as possible and the swing must be stopped at the end point. To design the minimum time control system, Pontryagim maximum principle is applied. In order to implement the control algorithm, the dynamic equation is linearlized at an equilibrium point, so that the linear time invariant state equation can be obtained. The overall performance of the closed loop system is evaluated by means of computer simulations and practical experiments in a broad range of working conditions. The effectiveness is proved through the experimental results for the anti-sway control of the load and the position control of trolly. It is expected that the proposed system will make an important contribution to the industrial fields.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.437-442
• /
• 2004

In this paper, design specifications for a new generation container crane in year 2013 is investigated. After analyzing the trend of the development of container cranes from the 1950s to date, a prospective size for targeting year 2013 is proposed. Introductory specifications of the frame, trolley, hoist and spreader for the proposed new crane are discussed. Considering that the mega-ships will load and unload more than 15000 boxes at one stop, rough dimensions of the crane including outreach, rail gage, lift, backreach, etc. are also suggested. Although the sheer size of the cranes already present some challenges, the biggest challenge is to improve productivity by maximizing the moves per hour. For this, the speeds of trolleys and hoists, rail loads, stability, etc. are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.77-80
• /
• 1996

In this paper a nonlinear control strategy via feedback linearization and energy based Lyapunov function for underactuated mechanical systems is investigated. Underactuated mechanical system is a system of which the number of actuators is less than the number of degrees of freedom. Developed algorithm is applied to a crane system of grab operation. Positioning of the trolley as well as swing-up of the pendulum to the up-right position including maintaining the sway angle at some desired degree are demonstrated. Simulations are provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.395-398
• /
• 1996

In this study, when the nonlinear overhead crane which allows simultaneously travel and traverse motion moves a desired transport route, the object suspended the end of rope does undesirable swing motion. Nonlinear overhead crane pertubes in the vicinity of an operating point, therefore the nonlinear overhead crane is modified to linear overhead crane for the operating point. The linear overhead crane was controlled to swing angles of the object by the ratio of torque inputs to motors of the girder and the trolley. As a basis for the result of the linear overhead crane, the nonlinear overhead crane was controlled swing angles of the object and positions of the overhead crane without collision with environmental equipment by partial state feedback control.