• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.44-58
• /
• 2002

A new polymorph of tridymite, an incommensurately modulated phase (IC phase), has been identified. While the symmetry of the IC lattice is same as that of the Ll phase, the geometry of the IC lattice structure is same as the basis of the L3 structure with a different modulation (modulation vector q=0.22 $c*_{H}$;$\lambda$ 37 ). On the other hand, the characteristic curved diffuse diffration observed from the Ll atoms could occur even at room phase suggests that the dynamic disordering of atoms, especially oxygen atoms could occur even at room temperature. The phase transition of Ll to L3 by grinding is gradual but very conspicuous: LllongrightarrowL1+IClongrightarrowIC+L3longrightarrowL3. However, it is revealed that real transition processes of individual grains are directly related to the local stress fields and preexisting microstructures.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2004

In this study, we introduce the structural analysis of amorphous silica nanoparticles by EF-TEM electron diffraction and in-situ heating experiments. Three diffused rings were observed on the electron diffraction patterns of initial silica nanoparticles, while crystalline spot patterns were gradually appeared during the insitu heating process at $900^{\circ}C$. These patterns indicate the basic unit of $SiO_4$ tetrahedra consisting amorphous silica and gradual crystallization into the ideal layer structure of tridymite by heating. Under high vacuum condition in TEM, SiO nanoparticles were redeposited on the carbon grid after evaporation of SiO gas from $SiO_2$ above $850^{\circ}C$ and the remaining $SiO_2$ were crystallized into orthorhombic tridymite, consistent with ex-situ heating results in furnace at $900^{\circ}C$.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.69-85
• /
• 2002

The chemical composition of bottle glass is consisted of Na2O-CaO-SiO2. However the cullet is mornally used in order to decrease the melting tsmperature. This induce the productivity of bottle and decreases the cost. The addition of plate glass decreases the Al2O3 content and in fluence the stone phenomenon and devitification in botle glass. Tus the Feldspar is added in order to increase the Al2O3 content when plate cullet was added in melting. The Tridymite crystal was observed over 7.5% Al2O3 contents, which shown as white crystal in appearance. It is Supposed that the Wollastonite Would be occurred in more over 7.5% Al2O3. This fad id well consised With the Litertctures.

• Journal of the Korean Ceramic Society
• /
• v.15 no.2
• /
• pp.59-65
• /
• 1978

Some compounds with tetrahedral framework structures are synthetized and the general methods of synthesis are discussed. There exist tridymite-, cristobalite-, Icmm-, Immm-, beryllonite-, feldspar-, and paracelsian-structure type in the gropu of compounds. Their lattice constants and space groups are summarized and given in a table.

• 보존과학연구
• /
• s.24
• /
• pp.99-130
• /
• 2003

This research carried out composition analysis the subject of potteries from kiln site at Gangwon-do, Chungcheong Nam∙Buk-do and the followings are the results. Firstly, XRD analysis results showed that soft potteries were consisted of $\alpha$-quartz, feldspar and soil minerals while hard potteries were consisted of high temperature crystals like mullite, tridymite and cristobalite. Secondly, the firing temperatures of the soft potteries were determined using XRD analysis. It ranged from $550^{\circ}C$ to $870^{\circ}C$.While the firing temperatures of the hard potteries were divided into 3 groups; Group Ⅰ: Potteries with Mullite and Feldspar - ranged from $1000^{\circ}C$ to$1200^{\circ}C$. Group II : Potteries with Mullite and Tridymite - ranged from $875^{\circ}C$ to $1200^{\circ}C$. Group III : Potteries with Cristobalite - ranged above $1200^{\circ}C$.Thirdly, the result of correlation analysis using trace element such asSc, Rb of the potteries form Gangwon do and Chungcheong Nam.Bukdokilns allowed us to divide the area with their own characteristics into 4-groups. Using the same result, kilns sited at Chungcheong Nam.Buk-do were classified into 3-groups.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.349-369
• /
• 2004

Today, in the cultural properties research, there are several methods for knowing the culture of the past through a lot of information that remains and relics contain. Especially, statistical method like presumption of producing center were introduced from computer development at the early 20th century. This study showed the characteristic about firing historic sites presumed as a tile-kiln in the remains of Cheonwang temple sites, Hanam, Gyeonggi province. Also, I used nature scientific methods for correlation between tiles excavated at historic sites and circumference building and obtained there results as follows. First, soft tile parts showed similar water suction ratio(over 10%) like another tiles, except hard tile parts. Second, identification about mineral crystallization in a sample showing low water suction ratio confirmed a result that Mullite, Tridymite, Cristobalite as high temperature crystal form were presented. I know that firing temperature was higher than the other tile parts from this result. Third, statistical analysis from micro-component resulted that tiles excavated at firing historic sites and Cheonwang temple sites were closely connected. As the results, I knew that the tiles got a supply after the establishment of tile-kiln, not at a long distance at the period of Cheonwang temple construction.

• KOMUNHWA
• /
• no.60
• /
• pp.101-120
• /
• 2002

The floor tile on a coated green-glass was excavated from the Beobgwangsa Temple Site in the Pohang City. We analyzed using the MXRD, ICP-AES, EDXRF, TG/DTA and TIMS. As a result of microscope analysis, it was composed of quartz, feldspar and clay particl

• Journal of the Korean Chemical Society
• /
• v.40 no.3
• /
• pp.202-208
• /
• 1996

SAPO-11 was synthesized hydrothermally and dealuminated with $H_4$EDTA. The framework structure of SAPO-11 was maintained safely by 24 hours' dealumination, but further dealumination for 48 hours caused SAPO-11 collapsed and to be changed to variscite($AIPO_4{\cdot}2H_2O$) and tridymite($SiO_2$). Dealuminated SAPO-11 showed two structural hydroxyl bands at 3607 $cm^{-1}$ and 3453 $cm^{-1}$ respectively. The intensities of these two bands increased according to the extent of dealumination, and disappeared by the adsorption of methylamine. Dealuminated SAPO-11 showed higher desorption temperatures and greater activation energies in desorption of water and methylamine compared to non-dealuminated SAPO-11. All the phenomena may be due to the stronger interactions of Bronsted acid sites of structural hydroxyl groups generated by dealumination with adsorbed water and methylamine molecules respectively.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.155-158
• /
• 2004

본 연구에서는 공냉(空冷)된 화력발전소 바닥재의 입도분포, 화학조성, 광물상 등 기초 특성과 압축강도비에 의해 포졸란 반응성을 측정하였다. 바닥재의 주요 성분은 $SiO_2$, $Al_2O_3,\;Fe_2O_3$로 이들의 합계가 91.2wt.%였으며, 주요 광물상은 mullite, quartz, cristobalite, tridymite, hematie 등이었다. 입도별 화학조성 변동은 거의 없었으나, 입도가 커짐에 따라 $SiO_2$는 quartz에서 cristobalite로 존재하는 비율이 증가하였다. 분쇄된 바닥재(blame 비표면적 $7,540cm^2/g$)의 양생 28일에서의 활성도 지수는 101을 나타내었다.

• 보존과학연구
• /
• s.35
• /
• pp.57-71
• /
• 2014

As results of this study about the restoration and production techniques of the ridge-end roof tiles excavated from middle gate site in Bunhwangsa Temple, the ridge-end tile was considered that can be combined with four distinguished parts such as a body with upper and lower portions, a back, a belly, and a wing. And also some patterns can be verified. The body and the wing were piled up the coil clay and the back-side was bonded. The pileup process was assumed that three types of wood tools were applied to bond the facing surfaces. After the completion of the pileup process, the entire exterior was retouched by hand. For touching the inside, bare hands or some tools like a wooden branches were used to scratch and to re-face a clay plasterwork. And also, the stamped patterns which produced by framework were bonded to the body. The results from the XRD and the TG-DTA, Tridymite which shows the phase transition in more than $867^{\circ}C$ could not be identified, and also the endothermic reaction peak at $1063^{\circ}C$ showed the result that the alkali feldspar such as the albite was changed into a different mineral at $1050^{\circ}C$. Therefore, the ridge-end tiles can be considered that the firing temperature was below $867^{\circ}C$.