• Wind and Structures
• /
• 제20권4호
• /
• pp.489-508
• /
• 2015

In this paper, a novel methodology is proposed to obtain optimum location of outriggers. The method utilizes genetic algorithm (GA) for shape and size optimization of outrigger-braced tall structures. In spite of previous studies (simplified methods), current study is based on exact modeling of the structure in a computer program developed on Matlab in conjunction with OpenSees. In addition to that, exact wind loading distribution is calculated in accordance with ASCE 7-10. This is novel since in previous studies wind loading distributions were assumed to be uniform or triangular. Also, a new penalty coefficient is proposed which is suitable for optimization of tall buildings. Newly proposed penalty coefficient improves the performance of GA and results in a faster convergence. Optimum location and number of outriggers is investigated. Also, contribution of factors like central core and outrigger rigidity is assessed by analyzing several design examples. According to the results of analysis, exact wind load distribution and modeling of all structural elements, yields optimum designs which are in contrast of simplified methods results. For taller frames significant increase of wind pressure changes the optimum location of outriggers obtained by simplified methods. Ratio of optimum location to the height of the structure for minimizing weight and satisfying serviceability constraints is not a fixed value. Ratio highly depends on height of the structure, core and outriggers stiffness and lateral wind loading distribution.

• Computational Structural Engineering
• /
• 제6권1호
• /
• pp.91-98
• /
• 1993

Minimum weight design of the boom of an excavator with stress and displacement constraints was performed. The procedure of analysis consists of the following steps. The finite element model of the boom was built up by using 227 triangular plate elements each of which has three nodes. And then the finite element program was implemented and its accuracy was verified by comparing its results with those of the commercial structural analysis package-ANSYS 4.4A. For the constraints of stresses and displacements, the design sensitivities of those were computed using direct differentiation method. To verify the reliability of them the results were compared with those of the finite difference method. The optimum design value was obtained by using PLBA(Pshenichny-Lim-Belegundu-Arora)non-linear optimization program which adopts the active set strategy. Using the above results, minimum weight design of an excavator boom showed an effect of 27% reduction in weight.

• Journal of the Society of Disaster Information
• /
• 제5권2호
• /
• pp.108-122
• /
• 2009

Purpose of this research about reduction the scholastic systematic triangular position of the security guard martial art which repeats a development is insufficient with demand of the while society to recognize and for the philosophic value research of security guard martial art composition principle puts out with the one method and from the reporter to search the aesthetics which appears does. In order to attain the goal of the research which sees the literature which relates with an security guard martial art widly, was an investigation and observed the aesthetics from concept and martial art of aesthetics and this the technical free use ability from actual site of the technical find which leads the practice voluntary repetition practice of security guard martial art with character and the body guard aesthetic integral part experience possibly did, there being will be able to acquire an aesthetic inspiration, confirmed. So the security guard martial art follows the composition principle of maximization central attitude and shock point breath control and mental intensive etc. of reinforcement of direction shock of relativity redundancy mental moral culture body agreement characteristic force and relaxation force and is completed and will be able to embody an aesthetic value with aesthetic elements of technical polishing process inside goes about reduction.

• 전기의세계
• /
• 제29권4호
• /
• pp.247-255
• /
• 1980

In this study, an application of Finite Element Method which, in principle, based on variational calculus has been presented for the two-dimensional analysis of magnetic flux distribution in the shell type core of single phase transformer. The necessary stationarity condition of energy functional and boundary conditions were determined under the assumptions that the electromagnetic field considered is stationary and that the effect of eddy current is negligible. In the process of application the domain of magnetic field was divided into triangle subsectional elements and then the matrix equations were constructed for the respective triangular element and for those of all after the manipulation of minimization process to the vector potential of magnetic field at the each vertex of the element. Furthermore the numerical computation for the equations was guided by the Gaussian Elimination Methods. As the results obtained, it is found that the aspect of magnetic flux distribution inside the core as well as the leakage flux profile at the vicinity of the inner leg of the core is not much different from the well-known distribution profile of magnetic flux, however, the procedure shows to possess the merit of the uniquely deterministic nature for the flux distribution at the desired points.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권4호
• /
• pp.367-380
• /
• 2019

A 1kW-class horizontal axis wind turbine (HAWT) rotor blade is taken into account to investigate elastic characteristics in 2-D. The elastic blade field is composed of symmetric cross-ply laminated composite material. Blade element momentum theory is applied to obtain the boundary conditions pressuring the blade, and the plane stress elasticity problem is formulated in terms of two displacement parameters with mixed boundary conditions. For the elastic characteristics a fair of differential equations are derived based on the elastic theory. The domain is divided by triangular and rectangular elements due to the complexity of the blade configuration, and a finite element method is developed for the governing equations to search approximate solutions. The results describe that the elastic behavior is deeply influenced by the layered angle of the middle laminate and the stability of the blade can be improved by controlling the layered angle of laminates, which can be evaluated by the mathematical approach.

• Journal of Korean Association for Spatial Structures
• /
• 제17권3호
• /
• pp.45-55
• /
• 2017

The objective of this study is to estimate the mechanical characteristics and nonlinear behaviors on the geometric nonlinear analysis of curved cable-membrane roof systems for long span lightweight roof structures. The weight of a cable-membrane roof dramatically can reduce, but the single layer cable-membrane roof systems are too flexible and difficult to achieve the required structural stiffness. A curved cable roof system with reverse curvature works more effectively as a load bearing system, the pretension of cables can easily increase the structural stiffness. The curved cable roof system can transmit vertical loads in up and downward direction, and work effectively as a load bearing structure to resists self-weights, snow and wind loads. The nonlinear behavior and mechanical characteristics of a cable roof system has greatly an affect by the sag and pretension. This paper is carried out analyzing and comparing the tensile forces and deflection of curved roof systems by vertical loads. The elements for analysis uses a tension only cable element and a triangular membrane element with 3 degree of freedom in each node. The authors will show that the curved cable-membrane roof system with reverse curvature is a very lightweight and small deformation roof for external loads.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제15권4호
• /
• pp.37-42
• /
• 2001

This paper resents a biological reaction model of describing processing features in treating wastewater via activated sludge A proposed model is designed by combining fuzzy rules investigating several elements which have influence on variables to be supervised BOD and SS are suggested as common variables in input and output variables, and O$_2$quantity is closed as input variable. We chose triangular type membership functions for input variables and determined the grades in each membership function based upon process data According to simulation result to show the validity of proposed model, fuzzy model's outputs give almost similar data to process output under same input conditions.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.415-417
• /
• 2003

we analyzed the electromagnetic behavior of a superconducting fault current limiter (SFCL) under the quench state using FEM. The analysis model used in this work is 5.5 KVA meander-line type SFCLs. Meshes of 3,650 triangular elements were used in the analysis of this SFCL. Analysis results showed that the distribution of current density was concentrated to inner curved line in meander-line type-SFCL and the maximum current density was 14.61 $A/m^2$ and also the maximum Joule heat was 2,030 $W/m^2$ in this region. We think that the new and the modified structure must be considered for an uniform distribution of the electromagnetic field.

• Industrial Engineering and Management Systems
• /
• 제15권4호
• /
• pp.364-373
• /
• 2016

Disassembly is one of the important activities in treating with the product at the End of Life time (EOL). Disassembly is defined as a systematic technique in dividing the products into its constituent elements, segments, sub-assemblies, and other groups. We concern with a Fuzzy Disassembly Line Balancing Problem (FDLBP) with multiple objectives in this article that it needs to allocation of disassembly tasks to the ordered group of disassembly Work Stations. Tasks-processing times are fuzzy numbers with triangular membership functions. Four objectives are acquired that include: (1) Minimization of number of disassembly work stations; (2) Minimization of sum of idle time periods from all work stations by ensuring from similar idle time at any work-station; (3) Maximization of preference in removal the hazardous parts at the shortest possible time; and (4) Maximization of preference in removal the high-demand parts before low-demand parts. This suggested model was initially solved by GAMS software and then using Genetic Algorithm (GA) in MATLAB software. This model has been utilized to balance automotive engine disassembly line in fuzzy environment. The fuzzy results derived from two software programs have been compared by ranking technique using mean and fuzzy dispersion with each other. The result of this comparison shows that genetic algorithm and solving it by MATLAB may be assumed as an efficient solution and effective algorithm to solve FDLBP in terms of quality of solution and determination of optimal sequence.

• Journal of Communications and Networks
• /
• 제12권3호
• /
• pp.222-230
• /
• 2010

In this paper, we present a closed-form approximation of the average sum rate of zero-forcing (ZF) beamforming (BF) with semi-orthogonal user selection (SUS). We first derive the survival probability associated with the SUS that absolute square of the channel correlation between two users is less than the orthogonalization level threshold (OLT).With this result, each distribution for the number of surviving users at each iteration of the SUS and the number of streams for transmission is calculated. Secondly, the received signal power of ZF-BF is represented as a function of the elements of the upper triangular matrix from QR decomposition of the channel matrix. Thirdly, we approximate the received signal power of ZF-BF with the SUS as the maximum of scaled chisquare random variables where the scaling factor is approximated as a function of both OLT and the number of users in the system. Putting all the above derivations and order statistics together, the approximated ergodic sum rate of ZF-BF with the SUS is shown in a closed form. The simulation results verify that the approximation tightly matches with the sample average for any OLT and even for a small number of users.