1 |
McKenna, F., Fenves, G.L., Scott, M.H. and Jeremic, B. (2014), Open System for Earthquake Engineering Simulation (OpenSees), Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
|
2 |
McNabb, J.W. and Muvdi, B.B. (1975), "Drift reduction factors for belt high-rise structures", Engineering Journal 3rd Quarter, 88-91.
|
3 |
Nanduri, P.M.B.R.K, Suresh, B. and Hussain, M.D.I. (2013), "Optimum position of outrigger system for high-rise reinforced concrete buildings under wind and earthquake loadings", Am. J. Eng. Res.(AJER), 2(8), 76-89.
|
4 |
Rahgozar, R., Ahmadi, A.R., Hosseini, O. and Malekinejad, M. (2011), "A simple mathematical model for static analysis of tall buildings with two outrigger-belt truss systems." , Struct. Eng. Mech., 40(1), 65-84.
DOI
|
5 |
Safari, D., Maheri, Mahmoud R. and Maheri, A. (2011), "Optimum design of steel frames using a multiple-deme GA with improved reproduction operators", J. Constr. Steel Res., 67(8), 1232-1243.
DOI
|
6 |
Smith, B. S. and Coull, A. (1991), Tall Building Structures, Wiley, New York, USA.
|
7 |
Taranath, B.S. (1975), "Optimum belt truss locations for high rise structures", Struct. Eng., 53(8), 345-348.
|
8 |
Taranath, B.S. (1998), Steel, Concrete, and Composite Design of Tall Buildings, (2nd Ed.), McGraw-Hill, New York, USA.
|
9 |
Wu, J.R. and Li, Q. (2003), "Structural performance of multi-outrigger braced tall buildings", Struct. Des. Tall Spec., 12(2), 155-176.
DOI
|
10 |
Zeidabadi, N.A., Mirtalae, K. and Mobasher, B. (2004), "Optimized use of the outrigger system to stiffen the couple shear walls in tall buildings", Struct. Des. Tall Spec., 13(1), 9-27.
DOI
|
11 |
AISC (2010), Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois, USA.
|
12 |
ASCE/SEI 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers ASCE, Reston, Virginia, USA.
|
13 |
ASTM Standard A572/A572M - 13a (2013), Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel, USA.
|
14 |
Coello, C. and Carlos A. (2000), "Use of a self-adaptive penalty approach for engineering optimization problems", Comput. Ind., 41(2), 113-127.
DOI
|
15 |
Ding, J.M. (1991), "Optimum belt truss location for high-rise structures and top level drift coefficient", J. Build. Struct., 4, 10-13.
|
16 |
Griffis, L.G. (2003), "Serviceability limit states under wind load", Engineering journal / American institute of steel construction.
|
17 |
Hoenderkamp, J.C.D. (2008), "Second outrigger at optimum location on high-rise shear wall", Struct. Des. Tall Spec., 17(3), 619-634.
DOI
|
18 |
Hoenderkamp, J.C.D. and Bakker, M.C.M. (2003), "Analysis of high-rise braced frames with outriggers", Struct. Design Tall Spec., 12(4), 335-350.
DOI
|
19 |
Huang, M.F., Chan C.M. and Kwok, K.C.S. (2011), "Occupant comfort evaluation and wind-induced serviceability design optimization of tall buildings", Wind Struct., 14 (6), 559-582.
DOI
|
20 |
Jahanshahia, R. and Rahgozar, M.R. (2012), "Free vibration analysis of combined system with variable cross section in tall buildings", Struct. Eng. Mech., 42(5), 715-728.
DOI
|
21 |
Kameshki, E.S. and Saka, M.P. (2001), "Genetic algorithm based optimum bracing design of non-swaying tall plane frames", J. Constr. Steel Res., 57(10), 1081-1097.
DOI
|
22 |
Lee, D.K., Kim, J.H., Starossek, U. and Shin, S.M. (2012), "Evaluation of structural outrigger belt truss layouts for tall buildings by using topology optimization", Struct. Eng. Mech., 43(6), 711-724.
DOI
ScienceOn
|
23 |
Lee, J.H., Bang, M.S. and Kim, J.Y.(2008), "An analytical model for high-rise wall-frame structures with outriggers", Struct. Design Tall Spec., 17(4), 839-851.
DOI
|