• Particle and aerosol research
• /
• v.14 no.4
• /
• pp.153-169
• /
• 2018

To identify a variety of organic compounds in the ambient aerosols, the two-dimensional gas chromatography-time of flight mass spectrometry (GCxGC) system (2DGC) has been applied. While 2DGC provides more peaks, the amount of the generated data becomes huge. A two-step approach has been proposed to efficiently interpret the organic aerosol analysis data. The two-dimensional 2DGC data were divided into 6 chemical groups depending on their volatility and polarity. Using these classification standards, all the peaks were subject to both qualitative and quantitative analyses and then classified into 8 classes. The aerosol samples collected in Seoul in summer 2013 and winter 2014 were used as the test case. It was found that some chemical classes such as furanone showed seasonal variation in the high polarity-volatile organic compounds (HP-VOC) group. Also, for some chemical classes, qualitative and quantitative analyses showed different trends. Limitations of the proposed method are discussed.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.51-66
• /
• 2018

As AI (Artificial Intelligence) technologies have been swiftly evolved, a lot of products and services are under development in various fields for better users' experience. On this technology advance, negative effects of AI technologies also have been discussed actively while there exists positive expectation on them at the same time. For instance, many social issues such as trolley dilemma and system security issues are being debated, whereas autonomous vehicles based on artificial intelligence have had attention in terms of stability increase. Therefore, it needs to check and analyse major social issues on artificial intelligence for their development and societal acceptance. In this paper, multi-categorical sentiment analysis is conducted over online public opinion on artificial intelligence after identifying the trending topics related to artificial intelligence for two years from January 2016 to December 2017, which include the event, match between Lee Sedol and AlphaGo. Using the largest web portal in South Korea, online news, news headlines and news comments were crawled. Considering the importance of trending topics, online public opinion was analysed into seven multiple sentimental categories comprised of anger, dislike, fear, happiness, neutrality, sadness, and surprise by topics, not only two simple positive or negative sentiment. As a result, it was found that the top sentiment is "happiness" in most events and yet sentiments on each keyword are different. In addition, when the research period was divided into four periods, the first half of 2016, the second half of the year, the first half of 2017, and the second half of the year, it is confirmed that the sentiment of 'anger' decreases as goes by time. Based on the results of this analysis, it is possible to grasp various topics and trends currently discussed on artificial intelligence, and it can be used to prepare countermeasures. We hope that we can improve to measure public opinion more precisely in the future by integrating empathy level of news comments.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.674-684
• /
• 2018

The purpose of this study is to construct ecological pond using LID technique in order to create naturally comfortable community space in urban idle space. The specification of the ecological pond is $110m^2$ of surface area, $0.45{\pm}0.02m$ of average depth, and bed material is composed of gravel (diameter ${\leq}60mm$), sand (diameter ${\leq}2mm$) and bentonite. Rainfall and water depth monitoring were conducted to determine the annual characteristics of inflow of the water for the ecological pond, result of total rainfall was 1,287 mm and showed a seasonal imbalance that accounted for 71.3% (918 mm) during July to August, but the annual mean water depth was kept constant at $0.45{\pm}0.02m$ due to the secondary water source. Annual trends of basic water quality showed a significant changes according to the season, such as water temperature ($5.2{\sim}28.8^{\circ}C$), DO (5.0 ~ 13.8 mg/L), EC ($113{\sim}265{\mu}S/cm$). BOD, COD, TN, and TP in physicochemical water quality tended to increase after October, but the ion parameters such as $NH_3$ and $PO_4{^{3-}}$ were generally low. Phytoplankton indicators Chl-a and BGA (blue green algae) showed a sharp increase from July to August, and green algae (Selenastrum bibraianum, Pediastrum boryanum etc.) and filamentous blue green algae (Phormidium sp.) emerged as a dominant species. The ion parameters ($F^-$, $Na^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were strongly correlated with the $Cl^-$ as a conservative substance (R=0.70~0.97, p<0.05). Water quality was influenced by the ambient environment such as seasonal changes or rainfall, and it was closely related to fluctuation of the inflow of the water. In the future, it is necessary to consider ecological connections by referring to the characteristics surveyed in this study in order to effectively manage the water quality and biodiversity of the ecological pond in idle space.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.4
• /
• pp.24-55
• /
• 2010

Jangmyeongdeung Lantern (貞陵長明燈) refers to the stone lantern placed in front of the royal tomb. It serves both symbolic and decorative purposes; symbolic because it is supposed to guard and illuminate the buried, and decorative because it is a work of sculpture that adorns the entire graveyard. The Jangmyeongdeung of Jeongneung was the earliest stone lantern to be produced during the Joseon period. Its square shape is unique among those from the early to mid-Joseon period. The three major parts of Jangmyeongdeung - the stand, the lantern, and the roof-shaped cover parts - are square in shape, differing from the octagonal shaped Jangmyeongdeung. The stand consists of three single stone blocks, the Hadaeseok(下臺石), Ganjuseok(竿柱石), and Sangdaeseok(上臺石). The Hwasaseok(火舍石), or the lantern part, is also a single stone block. Jangmyeongdeung of Jeongneung succeeds the style of those of Hyeon-neung and Jeongneung(玄正陵) of the Goryeo period and is of a better artistic quality. As the first Jangmyeongdeung lantern, it is a refined work of art that marks the foundation of the Joseon Kingdom. This paper tries to ascertain the stylistic origin of the square-shaped Jangmyeongdeung of Jeongneung and compare it with those of Buddhist temples. Consequently, similarities were found among the stone lanterns of Zen priests 'Jigong'(指空) and 'Nawong'(懶翁) in the Hweamsa Temple(檜巖寺) site from the late Goryeo period, those of Zen priest 'Muhak'(無學) of the Hweamsa Temple site, and those of national priest 'Bogak'(普覺) of Cheongnyongsa Temple(靑龍寺) from the early Joseon period. Primarily, this is because the three components(the stand, the lantern part, and the roof-shaped cover) are essentially square-shaped. Second, as the Ganjuseok(one of the components of the stand) became shorter, the stand took a more stable form. Third, the Hwasaseok(the lantern part) consists of two stone blocks joined together. Fourth, the roof-shaped cover is also in square in shape. Similarly, the Jangmyeongdeung of Jeongneung contains Buddhist elements as well. The three-bead pattern that decorates the Ganjuseok stand is an example. The three-bead pattern is one of the symbolic elements related to Tantric Buddhism. It is found on the diadems worn by Bodhisattvas from the Goryeo and early Joseon periods. The Jangmyeongdeung of Jeongneung in early Joseon directly influenced the production of the square-shaped stone lanterns used to decorate the tombs during the Joseon period. After the latter half of the 15th century, however, the octagonal-shaped Jangmyeongdeung style began to prevail. The Jangmyeongdeung of Jeongneung reflects the succession of the tradition of royal tombs from Goryeo to Joseon, the introduction of square-shaped stone lanterns to Buddhist temples, and the influence of the Buddhist philosophy of the time. It is a living testimony to various elements of each time and corresponding cultural trends.

• Food Science and Industry
• /
• v.52 no.2
• /
• pp.188-201
• /
• 2019

In the past, food additives were classified and managed as chemical synthetic and natural additives according to the manufacturing process, but it was difficult to confirm the purpose or function of food additives.CODEX, an internationalstandard, classifies food additives according to their practical use, based on scientific evidence on the technical effects of food additives, instead of classifying them as synthetic or natural. Therefore, very recently, the food additive standards in Korea have been completely revised in accordance with these global trends. Currently, the classification system of food additives is divided into 31 uses to specify their functions and purposes instead of manufacturing methods. Newer revision of the legislative framework for defining and expanding the scope of the Act as an enlarged area is required. Competition for preempting new food products based on bio-based technology is very fierce in order to enhance the safety of domestic people and maximize the economic profit of their own countries. In this age of infinite competition, it is very urgent to revise or supplement the current regulations in order to revitalize the domestic food industry and enhance national competitiveness through the development of food additives using new biotechnology. In this report, current laws on domestic food ingredients, food additives and manufacturing methods, and a comparison of domestic and foreign advanced countries' regulations and countermeasures strategies were reviewed to improve national competitiveness of domestic advanced biotechnology-based food additives industry.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.177-188
• /
• 2019

The aim of our study was to identify the changing trends in the composition, structure, and spatial distribution of forest vegetation in Apsan Park, a representative urban forest in Daegu, South Korea. A vegetation survey was conducted in 1997 and 2016 using phytosociological methods, and a detailed vegetation map was created using the physiognomic dominant species. There were 22 vegetation types in both 1997 and 2016, but two of those types increased and two decreased. The total coverage per unit area ($100m^2$) of the component vegetation species increased from 163% in 1997 to 182% in 2016, and natural vegetation tended to be more than twice that of artificial vegetation. The average number of species decreased by seven from 25 in 1997 to 18 in 2016. Species diversity (H') increased only slightly from 1,654 in 1997 to 1,680 in 2016, while species dominance (D) decreased by 9% from 0.304 in 1997 to 0.276 in 2016. The similarity in the composition of the forest vegetation was about 78%, which was nearly the same. The life form spectrums of vascular plants changed from '$G-R_5-D_4-e$' in 1997 to '$MM-R_5-D_4-e$' in 2016 and the central dormancy type changed from geophytes (G) to megaphanerophytes (MM). The spatial distribution of the forest vegetation was reduced by approximately four times that of artificial vegetation. The number of forest landscape elements (patches) increased from 269 in 1997 to 294 in 2016, while the average area decreased by 12% from 5.8 ha in 1997 to 5.1 ha in 2016.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.367-418
• /
• 2018

Just as safety is the most important thing in aviation, safety is the most important in the operation of unmanned aircraft (RPA), and safety operation is the most important in the legal responsibility of the operator of the unmanned aircraft. In this thesis, the legal responsibility of the operator of the unmanned aircraft, focusing on the responsibility of the operator of the unmanned aircraft, was discussed in depth with the issue of insurance, which compensates for damages in the event of an accident First of all, the legal responsibility of the operator of the unmanned aircraft was reviewed for the most basic : definition, scope and qualification of the operator of the unmanned aircraft, and the liability of the operator of the Convention On International Civil Aviation, the ICAO Annex, the RPAS Manual, the Rome Convention, other major international treaties and Domestic law such as the Aviation Safety Act. The ICAO requires that unmanned aircraft be operated in such a manner as to minimize hazards to persons, property or other aircraft as a major principle of the operation of unmanned aircraft, which is ultimately equivalent to manned aircraft Considering that most accidents involving unmanned aircrafts fall to the ground, causing damage to third parties' lives or property, this thesis focused on the responsibility of operators under the international treaty, and the responsibility of third parties for air transport by Domestic Commercial Act, as well as the liability for compensation. In relation to the Rome Convention, the Rome Convention 1952 detailed the responsibilities of the operator. Although it has yet to come into effect regarding liability, some EU countries are following the limit of responsibility under the Rome Convention 2009. Korea has yet to sign any Rome Convention, but Commercial Act Part VI Carriage by Air is modeled on the Rome Convention 1978 in terms of compensation. This thesis also looked at security-related responsibilities and the responsibility for privacy infringement. which are most problematic due to the legal responsibilities of operating unmanned aircraft. Concerning insurance, this thesis looked at the trends of mandatory aviation insurance coverage around the world and the corresponding regulatory status of major countries to see the applicability of unmanned aircraft. It also looked at the current clauses of the Domestic Aviation Business Act that make insurance mandatory, and the ultra-light flight equipment insurance policy and problems. In sum, the operator of an unmanned aircraft will be legally responsible for operating the unmanned aircraft safely so that it does not pose a risk to people, property or other aircraft, and there will be adequate compensation in the event of an accident, and legal systems such as insurance systems should be prepared to do so.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.193-228
• /
• 2014

In recent years, as well as management of public records, interest in the private archive of large and small is growing. Dedicated archive has various types. In addition, lack of personnel and budget, personnel records management professional because the absence, that help you maintain these records in a systematic manner is not easy. Request to the system have continued to rise, but the budget and professionals in order to solve this problem are missing. As breakthrough of the burden to the system with archive dedicated, it introduces the trends and meaning of public recording system, and was examined in detail AtoM function. AtoM is public land can be made by a method that requires a Web service, the database server. Without restrictions, including the advantage of being available free of charge, by the application or operating system specific, installation and operation is convenient. In addition, compatibility, and is highly scalable, AtoM use and convenient archive of private experiencing a shortage of personnel and budget. Because in terms of data management, and excellent interoperability and search share, and use, it is possible in the future, it favors also documentary use through a network of inter-agency archives and private. In addition, Enhancements exhibition services through cooperation with Omeka, long-term storage through Archivematica, many discussion is needed. Public centered around the private area of the recording management spilling expanded, open-source software allows to balance the recording system will be able to play an important role. In addition, the efforts of academia and in the field, close collaboration between the open source recording system through a user study should be continued. Furthermore, co-operation and sharing of private archives expect come true.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.38-61
• /
• 2019

Up until the early twentieth century in Germany, there were two research trends: 1) emphasizing objectives and making detailed observations of archaeological artifacts and sites, 2) tracing the remains of specific nations or ethnic groups and defining their temporal-spatial boundaries by conducting research on material culture in terms of nationalism or ethnocentrism. After the Second World War ended and Germany was divided, West German archaeology focused on observations of artifacts and sites, cataloging them, and doing research on chronology and distribution following their own traditional methodologies. East German archaeology attempted to prove the developing process of history and its Marxist principles based upon material culture and to examine the historic value of inherent specific cultural heritage based on criteria regarding how it corresponded to socialism and contributed to the development of socialism. Nevertheless, East and West German archaeology shared traditional archaeological methods inherited from German archaeology since the nineteenth century, and contact between archaeologists in West and East Germany continued to a degree. Furthermore, East German archaeology produced significant archaeological achievements acknowledged by West German and European archaeologists. These facts provided the momentum to complete rapid incorporation of the archaeologies of West and East Germany in spite of a one-sided process imposed by West German archaeology. In the case of Korea, it seems necessary to make an effort to share common research history and traditions and to encourage mutual academic exchange (e.g. joint excavation and archaeological research). Furthermore, it is also imperative to have open-minded attitudes toward accepting substantial results and interpretations achieved by North Korean archaeologists under scrutiny when and where necessary, despite seeming to have been fossilized by Marxism and Juche ideology. Any efforts to narrow the gap in archaeological research and conservation of cultural heritage between the archaeologies of South and North Korea should be made immediately. The case of Germany demonstrates how such a project could proceed efficaciously.