• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.334-342
• /
• 1991

To investigate the phase equilibria and structural properties of microemulsions, we study a simple phenomenological model on the basis of the cubic lattice cell with which the oil- and water-filled cells are connected one another, respectively. The surfactant is assumed to be insoluble in both oil and water, and to be adsorbed at the oil-water interface. The Schulman condition, according to which the lateral pressure of the surfactant layer is compensated by the oil-water interfacial tension, is found to hold to good approximation in the middle-phase microemulsion. Our results show that the oil- and water-filled domains in that microemulsion are about 50-150 $\AA$ across, and depend sensitively on the curvature parameters. The phase diagram is not symmetric in this model. It may be asymmetrized intrinsically by non-equivalency of oil and water. The two- and tree-phase equilibria including critical points and critical endpoints are found.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.202-210
• /
• 2020

This study investigated the optimal levels of stand density control considering the stability of Larix kaempferi stands. A stand density management diagram was developed from 259 sample plots. Based on these data, we determined an optimal level of the stand density control by identifying the relationship between the relative yield index (Ry) and height-to-diameter ratio. The estimated r-square (R²) of the stand density management diagram is 0.600. The analysis of the relationship between Ry and the slender tree incidence showed that when the stand density exceeded a certain threshold and the ratio of slender trees rapidly increased. The critical value of Ry was 0.63. The results of this study are expected to contribute to the establishment of stand management strategies that can reduce damage from natural causes, such as wind and snow, and to develop stand practice systems for the improved productivity of commercial forests.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.3 s.19
• /
• pp.97-105
• /
• 2004

Planning phase became very important because the construction market in Korea is often unpredictable. The existing feasibility analysis cannot fulfill its purpose in development projects because they are based on intuitive approach rather than systematic approach. The purpose of this study is to make a prototype of feasibility model to be a good investment. To build the model, first, risk factors which can be occurred in project had to be selected. Risk factors were divided into several groups in basis of characteristical risk. Economical risk factors were input on financial analysis. Then, to catch the relevance and influence of all risk factors, influence diagram and decision tree were made. Finally, sensitivity analysis was activated, then what the critical factors were, and how those factors could be solved. Through these procedures, the feasibility model that was made in this study could include both quantitative and qualitative factors. This model is expected to be used as a guide of feasibility analysis including all risk factors and is to serve systematic frame in planning and feasibility stage.

• Journal of Elementary Mathematics Education in Korea
• /
• v.12 no.1
• /
• pp.79-100
• /
• 2008

Freudenthal has advocated the reinvention method. In that method, the pupils start with a meaningful context, not ready-made concepts, and invent informative method through which he could arrive at the formative concepts progressively. In many face the reinvention method is contrary to the traditional method. In traditional method, which was named as 'concretization method' by Freudenthal, the pupils start with ready-made concepts, and applicate this concepts to various instances through which he could arrive at the understanding progressively. Through analysis, it turns out that Korea's seventh elementary mathematics textbook is based on concretization method. In this thesis, first of all, I will reconstruct probability unit of seventh elementary textbook according to Freudenthal's reinvention method. Next, I will perform teaching experiment which is ruled by new lesson design. Lastly, I analysed the effects of teaching experiment. Through this study, I obtained the following results and suggestions. First, the reinvention method is effective on the teaching of probability concept and algorithm. Second, in comparison with current textbook strand, my strand which made probability concept go ahead and combinatorics concept let behind is not deficiency. Third, tree diagram is effective matrix which contribute to formalization of combinatorics calculation. Lastly, except for fraction, diverse representation of probability, for example percentage or informal ratio expression must be introduced in teaching process.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.99-111
• /
• 2010

In recent years, the number of high-rise building construction projects has grown, and the number of construction safety accidents has also been increasing. Therefore, the objective of this study is to propose plans to prevent accidents by systematically organizing accident principles and developing a tree diagram for the process of safety accidents that occur in the construction industry. This study aims to show the diverse characteristics of construction accidents based on KOSHA's annual reports on safety accidents(burial, conflagration, explosion, burn) from 1993 to 2009. To achieve these objectives, in this study we first examined the risk factors for burial, conflagration, explosion, and burn. We then systematically organized the classification viewpoint of accident causes, and suggested a methodology for the rationalization of safety management through an analysis of the primary causes of accidents by work type. The results of this study based on this methodology can be divided into three areas: 1)the types of facilities were divided into 43 categories by analyzing the information of KOSHA's annual reports; 2)the causes of burial, conflagration, explosion, and burn were divided into 63types; 3)the types of work were divided into 29 categories.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.654-662
• /
• 2016

As the number of gates and basic events in fault trees increases, it becomes difficult to calculate the exact probability of the top event. In order to overcome this difficulty the BDD methodology can be used to calculate the exact top event probability for small and medium size fault trees in short time. Fault trees are converted to BDD by using CUDD library functions and a failure path search algorithm is proposed to calculate the exact top event probability. The backward search algorithm is more efficient than the forward one in finding failure paths and in the calculation of the top event probability. This backward search algorithm can reduce searching time in the identification of disjoint failure paths from BDD and can be considered as an effective tool to find the cut sets and the minimal cut sets for the given fault trees.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.141-149
• /
• 2017

Vulnerability assesses the loss of major performance functions of GCV (Ground Combat Vehicles) when it is hit by enemy's shell. To decide the loss of major functions, it is determined what effects are on the performance of GCV when some components of GCV are failed. M&S (Modeling and Simulation) technology is used to vulnerability assessment. The hydro-pneumatic suspension is used as a sample part. The procedures of vulnerability assessment of the hydro-pneumatic suspension are shown as follows: 1) The components of the suspension are defined, and shot lines are generated evenly around the part. 2) The penetrated components are checked by using the penetration equation. 3) The function model of the suspension is designed by using IDEF0. 4) When the failure of the critical components of the suspension happens, its effect on the function of the suspension can be estimated using DMEA (Damage Mode and Effects Analysis). 5) The diagram of FTA (Fault Tree Analysis) is designed by exploiting DMEA. 6) The damage probability of the suspension is calculated by using FTA and vulnerable area method. In this paper, SLAP (Shot Line Analysis Program) which was developed based on COVART methodology. SLAP calculates the damage probability and visualizes the vulnerable areas of the suspension.

• Advances in materials Research
• /
• v.13 no.1
• /
• pp.63-86
• /
• 2024

Asphalt concrete (AC), is a mixture of bitumen and aggregates, which is very sensitive in the design of flexible pavement. In this study, the Marshall stability of the glass and carbon fiber bituminous concrete was predicted by using Artificial Neural Network (ANN), Support Vector Machine (SVM), Random Forest (RF), and M5P Tree machine learning algorithms. To predict the Marshall stability, nine inputs parameters i.e., Bitumen, Glass and Carbon fibers mixed in 100:0, 75:25, 50:50, 25:75, 0:100 percentage (designated as 100GF:0CF, 75GF:25CF, 50GF:50 CF, 25GF:75CF, 0GF:100CF), Bitumen grade (VG), Fiber length (FL), and Fiber diameter (FD) were utilized from the experimental and literary data. Seven statistical indices i.e., coefficient of correlation (CC), mean absolute error (MAE), root mean squared error (RMSE), relative absolute error (RAE), root relative squared error (RRSE), Scattering index (SI), and BIAS were applied to assess the effectiveness of the developed models. According to the performance evaluation results, Artificial neural network (ANN) was outperforming among other models with CC values as 0.9147 and 0.8648, MAE values as 1.3757 and 1.978, RMSE values as 1.843 and 2.6951, RAE values as 39.88 and 49.31, RRSE values as 40.62 and 50.50, SI values as 0.1379 and 0.2027 and BIAS value as -0.1 290 and -0.2357 in training and testing stage respectively. The Taylor diagram (testing stage) also confirmed that the ANN-based model outperforms the other models. Results of sensitivity analysis showed that the fiber length is the most influential in all nine input parameters whereas the fiber combination of 25GF:75CF was the most effective among all the fiber mixes in Marshall stability.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.65-84
• /
• 2013

This paper introduces a systems engineering approach to reliability centered maintenance to address some of the weaknesses. Reliability centered maintenance is a systematic, disciplined process that produces an efficient equipment management strategy to reduce the probability of failure [1]. The study identifies the need for RCM, requirements analysis, design for RCM implementation. Value modeling is used to evaluate the value measures of RCM. The system boundary for the study has been selected as containment spray pump and its motor drive. Failure Mode and Criticality Effects analysis is applied to evaluate the failure modes while the logic tree diagram used to determine the optimum maintenance strategy. It is concluded that condition based maintenance tasks should be enhanced to reduce component degradation and thus improve reliability and availability of the component. It is recommended to apply time directed tasks to age related failures and failure finding tasks to hidden failures.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.45-67
• /
• 2000

Broadband access technologies plays an important role in the national information infrastructure. In the evolution path of the information infrastructure, the relative economics of alternative access technology is the most critical determining factor. In this paper, we discuss the economics of local loop access technologies of existing technologies, such as, ADSL, HFC, and new PLC. To do this, we suggest appropriate configuration of access network system and its associated numerical equations. To modelize access network system and drive the numerical equations, we consider the DS (Double Star) and the T&B (Tree ＆ Brench) architecture and analyse the adequate block diagram of each access system for each technology We introduce the density of subscriber as a key variable and the equation of allocating optimal number of cell in a service area. We analyze the relative economics of local loop architecture in two different situations, that is, urban and rural. From the empirical implementation, we found that for the case of urban area, where the cost of cable and infrastructure is not necessary, there is not much difference in the cost per one subscriber. However, for the case of rural region, we found that there is remarkable difference in the cost per one subscriber among technologies. Therefore we conclude that the economics of local loop architecture is depend on the density of subscriber and existing network infrastructures. we hope that this paper contribute to the optimal technology selection of consmer, technology Providers, and government.