The objective of this paper is to compare the variation of surface properties by hydrochloric acid pre-treatment and of metallic potassium and their salts loading effect for activated carbon after surfaces transformation by acid. From the results of nitrogen adsorption, each isotherm shows a distinct knee band, which is closely related to the characteristic of microporous carbons with capillary condensation in micropores. In order to present the causes of the differences in surface properties and $S_{BET}$ after the samples were treated with hydrochloric acid, pore structure and surface morphology are investigated by adsorption analysis. X-ray diffraction (XRD) patterns indicate that activated carbons show better performance for metallic potassium and potassium salts by pre-treatment with hydrochloric acid. Scanning electron microscopy (SEM) pictures of potassium/activated carbon particles provide information about the homogeneous distribution of metal or metal complex on the surface. For the chemical composition microanalysis for potassium treatment of the activated carbon pre-treated with hydrochloric acid, samples were analyzed by energy disperse X-ray (EDX). Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm. A positive influence of the acidic groups on the carbon surface by acid treatment is also demonstrated by an increase in the contents of potassium salts with increasing of acidic groups calculated from Boehm titration.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
1999.11a
/
pp.221-223
/
1999
In this work, samples were manufactured variously by changing conventional calcining and sintering conditions and we tried the utilization by making the heat treatment time, which is demanded to high-Tc phase formation, much shorter. We found out optimal heat treatment conditions with the analysis on formation process at superconducting phase in term of the change of calcining and sintering time and then, examined X-ray diffraction(XRD) patterns, scanning electron microscope(SEM) measurement and energy dispersive X-ray spectrometer(EDX) of the samples manufactured under heat treatment conditions which we suggest here. As a result, 2223 high-$T_c$, phase of (Bi,Pb)SrCaCuO superconductor starting with ($Bi_l$ xPbx,)$_2$$Sr_2$$Ca_2$$Cu_3$$O_y$, composition was formed from 1 hr sintering sample at temperature nearby melting point and also the completed sample with calcining and sintering time of 9 hr was formed high-$T_c$.low-$T_c$ phase appearing in sight above the critical temperature of liquid $N_2$.
Objectives : Since there are complex associations between diseases/symptoms and acupoints, one-to-one correspondence may not be the proper approach. Pattern identification has been being used as a clinical framework to make treatment decisions by extracting and synthesizing clinical data including patients' signs and symptoms. In this article, we propose two different models explaining the relationships between diseases and acupoints based on the branch treatment [Zhibiaofa] and the root treatment [Zhibenfa]. Methods : We explained the relationships between diseases/symptoms and acupoints from the example data from our previous study on traditional acupuncture point selection patterns for pain control. Diseases include low back pain, migraine, irritable bowel syndrome, osteoarthritis, ankle sprain, carpal tunnel syndrome, and dysmenorrhea, and acupoints included LI4, BL23, BL25, SP6, BL60, TE5, and CV4. Results : The relationships between diseases/symptoms and acupoints can be explained directly based on the branch treatment, and also can be explained indirectly through pattern identification based on the root treatment. Pattern identifications included both meridian-based pattern identification based on the spatial information of diseases and visceral organ-based pattern identification based on the characteristics of diseases. Conclusions : In the East Asian traditional medicine, Korean medicine doctors choose the most appropriate acupoints based either on the diseases/symptoms (i.e., branch treatment) or on the results of pattern identifications (i.e., root treatment). It is necessary to understand the two different approaches to choose specific acupoints for the targeted diseases.
It is known that aggressive treatment of chemotherapy, radiation and autogenous stem cell transplantation is effective for prevention of recurrence in the high-risk breast cancer patients. It was assumed that this procedure takes a longer time and decreases the quality of life more than the standard adjuvant chemotherapy. However, there are few studies comparing the quality of life of patients having bone marrow transplantation and adjuvant chemotherapy. Most of the studies were focused on the quality of life in one point of time, such as only during the early treatment stage, only overall quality of life rather than specific dimensions of the quality of life. The purposes of this study are 1) to identify the difference of the quality of life between two different treatment patterns, adjuvant chemotherapy and autogenous stem cell transplantation: 2) to identify the mostly affected dimension and the periods of time affected by the treatment patterns; and 3) to identify the trajectories of quality of life in each treatment pattern. This is a time series design that measures 4 different points of times. At the beginning of the study, 19 patients were placed in the chemotherapy group and 12 in the group of auto-peripheral blood stem cell transplantation. The inclusion criterion was the advanced disease stage of 3 or over with metastasis of more than 5 lymph nodes. The exclusion criteria were 1) anyone who has metastasis to other organ; 2) anyone who had psychological problems. Ferrell's Quality of Life Scale for Cancer Survivors 41 items on a 10 point scale was used. The QOL-CS includes 4 dimensions, which were labeled physical, psychological, social, and spiritual. The Cronbach‘s alpha of this scale was 0.89. Mann-Whitney U test and Friedman test were used to test each hypothesis. In comparison of the two groups, the quality of life of the bone marrow transplantation group dramatically increased at the 3rd and 6th month after transplantation, while the chemotherapy groups results stayed lower. The most affected dimension of the quality of life at the end of the treatment was the physical dimension. However, it and increased along with time, while the psychological dimension values remained low over the long-term period. Intensive nursing care is needed during the entire period of chemotherapy in all patients having chemotherapy, and is also required for right after cases of bone marrow transplantation.
Park, Jung-Eun;Lee, Jin-Woo;Chung, Dong-Hwa;Cha, Kyung-Suk
The korean journal of orthodontics
/
v.36
no.5
/
pp.369-379
/
2006
Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.
Kim, Dongsu;Lim, Byungmook;Han, Dongwoon;Park, Ji-eun;Jung, Hyoung-Sun
Journal of Society of Preventive Korean Medicine
/
v.21
no.3
/
pp.1-10
/
2017
Objectives : The purpose of this study is to investigate the practice patterns of traditional Korean medicine (TKM) doctors and the acceptance of payment model in order to develop a new TKM health insurance payment model linked with TKM clinical practice guidelines (CPGs). Methods : Lumbar herniated intervertebral disc (HIVD) and idiopathic facial palsy (IFP) were selected as a test diseases to develop a new TKM payment model. The level of benefit coverage in the National Health Insurance (NHI) was designed. The survey asked 228 TKM doctors about their practice patterns in HIVD and IFP patients and acceptance of new payment model. Results : Mean of medical cost for treatment of HIVD was 441,000 KW, mean of treatment period ranged from 4.9 to 17.5 weeks, and mean of number of treatment ranged from 14.6 to 50.4 HIVD patients. In the case of IFP, mean of medical cost for treatment of IFP was 468,000 KW, mean of treatment period was at least 4.2 and up to 15.9 weeks and mean of number of treatment ranged from 14.2 to 52 IFP patients. Conclusions : Current study suggests that mixed payment model of per-visit and episode-based model seem to be proper. The model 1 bundles both items which were covered and not covered by NHI in a rational way. The model 2 is based on the development and application of critical pathway. Lastly, model 3 suggests bundling of items covered by current NHI. Acceptance of TKM doctors is expected to be highest in the model 3.
Journal of the korean academy of Pediatric Dentistry
/
v.46
no.4
/
pp.362-368
/
2019
The purpose of this study was to analyze outpatient referral patterns of children in Jeonbuk National University Dental Hospital. All patients under 16 years old who were consulted from the external facilities were reviewed based on the electronic medical record of Jeonbuk National University Dental Hospital from 2015 to 2018. Total 720 boys and 460 girls with an average age of 7.4 years were referred from local dental clinic (85.2%) for treatment severity (90.2%). 3.2% of patients has disability with the highest number of intellectual disabilities. The patients were usually referred at the pre-treatment stage with higher rates if they had disability or medical problem. Referral rate by chief complaints was highest in surgery, followed by reparative treatment and orthodontic treatment. 2nd referrals in pediatric dentistry had a higher rate of referrals to minor surgery and pulp treatment than of first referrals. The time point of 2nd referral was relatively delayed with increased ratio of 'during treatment'. These results suggest necessities of appropriate case selection and referral based reasonable criteria for pediatric dentist.
Lee, Chang Yeol;Kim, Woo Chul;Kim, Hun Jeong;Park, Jeong Hoon;Min, Chul Kee;Shin, Dong Oh;Choi, Sang Hyoun;Park, Seungwoo;Huh, Hyun Do
Progress in Medical Physics
/
v.26
no.3
/
pp.127-136
/
2015
The purpose of this study is to perform a dosimetric evaluation of amplitude-based respiratory gating for the delivery of volumetric modulated arc therapy (VMAT). We selected two types of breathing patterns, subjectively among patients with respiratory-gated treatment log files. For patients that showed consistent breathing patterns (CBP) relative to the 4D CT respiration patterns, the variability of the breath-holding position during treatment was observed within the thresholds. However, patients with inconsistent breathing patterns (IBP) show differences relative to those with CBP. The relative isodose distribution was evaluated using an EBT3 film by comparing gated delivery to static delivery, and an absolute dose measurement was performed with a $0.6cm^3$ Farmer-type ion chamber. The passing rate percentages under the 3%/3 mm gamma analysis for Patients 1, 2 and 3 were respectively 93.18%, 91.16%, and 95.46% for CBP, and 66.77%, 48.79%, and 40.36% for IBP. Under the more stringent criteria of 2%/2 mm, passing rates for Patients 1, 2 and 3 were respectively 73.05%, 67.14%, and 86.85% for CBP, and 46.53%, 32.73%, and 36.51% for IBP. The ion chamber measurements were within 3.5%, on average, of those calculated by the TPS and within 2.0%, on average, when compared to the static-point dose measurements for all cases of CBP. Inconsistent breathing patterns between 4D CT simulation and treatment may cause considerable dosimetric differences. Therefore, patient training is important to maintain consistent breathing amplitude during CT scan acquisition and treatment delivery.
Kim, Han-Hee;Jeon, Eun-Chae;Cha, Jin-Ho;Lee, Je-Ryung;Kim, Chang-Eui;Choi, Hwan-Jin;Je, Tae-Jin;Choi, Doo-Sun
Journal of the Korean Society of Manufacturing Process Engineers
/
v.12
no.6
/
pp.10-16
/
2013
Ultra-fine planing and micro punching are separately used for improving surface roughness and machining dot patterns, respectively, of metal molds. If these separate machining processes are applied for machining of identical molds, there could be an aligning mismatch between the machine tool and the mold. A hybrid machining system combining ultra-fine planing and micro punching was newly developed in this study in order to solve this mismatch; hybrid process technology was also developed for machining dot patterns on a mirror surface of a metal mold. The hybrid machining system has X, Y, and Z axes, and a cam axis for ultra-fine planing. The cam axis and attachable and removable solenoid actuators for micro punching can make large and small sizes of dot patterns, respectively. Ultra-fine planing was applied in the first place to improve the surface roughness of a metal mold; the measured surface roughness was about 20nm. Then, micro punching was applied to machine dot patterns on the same mold. It was possible to control the diameter of the dot patterns by changing the input voltage of the solenoid actuator. Before machining, severe inhomogeneous plastic deformation around the machined dot patterns was also removed by annealing heat treatment. Therefore, it was verified that metal molds with dots patterns for optical products can be machined using a hybrid machining system and the hybrid process technology developed in this study.
Journal of Physiology & Pathology in Korean Medicine
/
v.27
no.5
/
pp.553-562
/
2013
This study was performed to develop cold-heat and deficiency-excess pattern identification for dementia, as well as for standard Korean medicine diagnosis and treatment. Five experts comprised of 4 neuropsychiatrists of Korean medicine and 1 statistician to develop cold-heat and deficiency-excess pattern identification for dementia. We searched studies about pattern identification and selected 507 articles using Oasis search terms provided by the KIOM. As a result, 10 pattern identification research study were recruited. Moreover, we analyzed neuropsychological assessments for dementia that evaluate Behavioral and Psychological Symptoms of Dementia (BPSD) and cognitive function using experts conferences and we selected neuropsychological instruments using pattern identification. Six cold patterns, six heat patterns, ten deficiency patterns, and four excess patterns were identified according to the cold-heat and deficiency-excess pattern identification of dementia. We selected the Caregiver-Administered Neuropsychiatric Inventory and the Korean Mini-Mental State Examination as neuropsychological assessments of dementia, which examine behavioral symptoms and cognitive function, suspectively. We formed positive and negative correlation between Korean medicine pattern identification and neuropsychological assessments for dementia. We developed and suggested a forecast module of pattern identification for dementia. But, it is necessary to perform additional clinical trials to verify its validity and accuracy.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.