Development of Hybrid Machining System and Hybrid Process Technology for Ultra-fine Planing and Micro Punching
![]() |
Kim, Han-Hee
(Dept. of NanoManufacturing Technology, KIMM)
Jeon, Eun-Chae (Dept. of NanoManufacturing Technology, KIMM) Cha, Jin-Ho (Dept. of NanoManufacturing Technology, KIMM) Lee, Je-Ryung (Dept. of NanoManufacturing Technology, KIMM) Kim, Chang-Eui (Dept. of NanoManufacturing Technology, KIMM) Choi, Hwan-Jin (Dept. of NanoManufacturing Technology, KIMM) Je, Tae-Jin (Dept. of NanoManufacturing Technology, KIMM) Choi, Doo-Sun (Dept. of NanoManufacturing Technology, KIMM) |
1 | Je, T. J., Choi, D. S., Jeon, E. c., Park, E. S. and Choi, H. J., "Trends of Flat Mold Machining Technology with Micro Pattern," J. of KSMPE, Vol. 11, pp. 1-6, 2012. |
2 | Jeon, E. c., Je, T. J. and Jang, S. h., "Development of Machining Technology for Non-continuous Pattern Removing Plastic Deformation Around Pattern," J. of KSMPE, Vol. 9, pp. 1-6, 2010. |
3 | Tsou, C., Chang, C., Lai, T. and Huang, C., "The Implementation and Performance Evaluation of a Silicon-based LED Packaging Module with Lens Configuration," Mircosystem Tech., Vol. 19, pp. 1851-1862, 2013. DOI ScienceOn |
4 | Lee, K. H., Jee, S. H., Kim, S. H., Yoon, Y. S. and Kim, S. H., "Modeling for New Type Backlight Units," Kor. J. Opt. Photon., Vol. 21, pp. 41-45, 2010. 과학기술학회마을 DOI ScienceOn |
5 | Taljat, B. and Pharr, G. M., "Development of Pile-up During Spherical Indentation of Elastic-plastic Solids," Inter. J. Solids and Struc., Vol. 41, pp. 3891-3904, 2004. DOI ScienceOn |
6 | Chaudhri, M. M. and Winter, M., "The Load-bearing Area of a Hardness Indentation," J. Phys. D, Vol. 21, pp. 370-374, 1988. DOI ScienceOn |
7 | Cheng, Y. T. and Cheng, C. M., "Effects of 'Sinking in' and 'Piling up' on Estimating the Contact Area Under Load in Indentation," Phil. Mag. Let., Vol. 79, pp. 115-120, 1998. |
![]() |