• 제목/요약/키워드: transversely isotropic

검색결과 153건 처리시간 0.019초

폭이 변하는 Transversely Isotropic 판의 탄성좌굴 (Elastic Buckling of Transversely Isotropic Plate with Variable Width)

  • Yoon, S.J.;Jung, J.H.
    • Composites Research
    • /
    • 제15권5호
    • /
    • pp.35-43
    • /
    • 2002
  • 본 연구는 폭이 변하는 transversely isotropic 판에서 평행한 변에 서로 크기가 다른 면내 축방향 압축력이 작용하며, 경사진면에는 면내 전단력이 작용하는 경우 판의 탄성좌굴거동에 관한 해석적 연구결과이다. 폭이 변하는 등방성판의 좌굴해석을 위해 개발된 기존의 이론적 해를 확장하여 transversely isotropic 재료의 역학적 성질을 고려한 좌굴해석을 할 수 있도록 하였다. 이론식은 power series를 사용하여 유도하였으며, 유한요소해석을 부가적으로 수행하고 그 결과를 이론식을 사용한 해석결과와 비교, 검토하였다.

횡적등방성 지층의 시추공 간 탄성파 주시 자료의 토모그래피 역산 연구 (A Study on Tomographic Inversion of Crosshole Seismic Traveltimes in Transversely Isotropic Layers)

  • 장성형;양승진;황세호;김중열
    • 지질공학
    • /
    • 제3권3호
    • /
    • pp.231-239
    • /
    • 1993
  • 본 연구에서는 지층속도가 이방성의 일종인 횡적등방성을 갖는 지역에서의 시추공 간 탄성파 주시자료를 역산하여 속도 이상대를 규명하는 연구를 시행하였다. 등방성 및 횡적등방성이 모형지층에 대해 파선추적법으로 합성 탄성파 주시를 구한 후, 이 주시자료에 대해 이방성을 고려한 ART 역산법과 이방성을 고려하지 않은 일반적인 ART 연산법에 의해 속도 분포를 구해본 결과, 이방성을 고려한 ART법에 의하면 이방성 및 등방성 지층의 속도분포가 잘 결정되었으며 일반적 ART법에 의하면 등방성 지층의 속도는 잘 결정되나 이방성 지층의 속도에는 오차가 많이 발생하였다. 따라서 지층의 이방성 또는 횡적등방성에 대한 사전 정보가 없을 때에는 이방성을 고려한 ART법을 적용하는 것이 좋을 것이다.

  • PDF

횡방향으로 등방성인 재료에서 균열선단 크리프 변형 거동 (Crack Tip Creep Deformation Behavior in Transversely Isotropic Materials)

  • 마영화;윤기봉
    • 대한기계학회논문집A
    • /
    • 제33권12호
    • /
    • pp.1455-1463
    • /
    • 2009
  • Theoretical mechanics analysis and finite element simulation were performed to investigate creep deformation behavior at the crack tip of transversely isotropic materials under small scale creep (SCC) conditions. Mechanical behavior of material was assumed as an elastic-$2^{nd}$ creep, which elastic modulus ( E ), Poisson's ratio ( ${\nu}$ ) and creep stress exponent ( n ) were isotropic and creep coefficient was only transversely isotropic. Based on the mechanics analysis for material behavior, a constitutive equation for transversely isotropic creep behavior was formulated and an equivalent creep coefficient was proposed under plain strain conditions. Creep deformation behavior at the crack tip was investigated through the finite element analysis. The results of the finite element analysis showed that creep deformation in transversely isotropic materials is dominant at the rear of the crack-tip. This result was more obvious when a load was applied to principal axis of anisotropy. Based on the results of the mechanics analysis and the finite element simulation, a corrected estimation scheme of the creep zone size was proposed in order to evaluate the creep deformation behavior at the crack tip of transversely isotropic creeping materials.

Cassini 난형곡선을 활용한 횡등방성 암석 파괴함수 (Failure Function of Transversely Isotropic Rock Based on Cassini Oval)

  • 이연규
    • 터널과지하공간
    • /
    • 제27권4호
    • /
    • pp.243-252
    • /
    • 2017
  • 횡등방성 암석의 파괴거동은 등방성 암석의 경우와 큰 차이가 있으므로 횡등방성 암반에 건설되는 암반구조물의 정밀한 안정성 평가를 위해서는 횡등방 파괴함수의 개발이 필요하다. 이 연구에서는 17세기 천문학자 Cassini가 지구둘레를 도는 태양의 궤도를 모델링하기 위해 제안한 Cassini 난형(卵形)곡선을 기반으로 횡등방성 암석의 강도정수 분포함수를 제안하였다. 제안된 강도정수 분포함수는 횡등방성 암석시료에 대한 삼축압축시험을 통해 실험적으로 결정이 가능한 2개의 모델 파라미터로 정의된다. 제안된 강도정수 분포함수를 마찰각과 점착력의 공간분포함수로 채용하여 기존의 Mohr-Coulomb(M-C) 파괴함수를 3차원 횡등방성 M-C 파괴함수로 확장시켰다. 제안된 횡등방성 M-C 파괴함수의 적합성을 검증하기 위해 횡등방성 암석시료의 삼축압축시험 및 진삼축압축시험을 수치모사하였다. 수치실험을 통해 예측된 결과는 실제 실험실 시험에서 관찰되는 횡등방성 암석의 파괴거동과 부합하였다. 또한 진삼축압축시험 수치모사 결과는 암석강도의 중간주응력 의존성이 암석시료에 포함된 미시적 연약면의 공간분포 특성과 밀접한 관련이 있을 수 있음을 보여주었다.

횡등방성 원통 셸에 의한 수중 음파의 공명 산란 (Resonant Scattering of Underwater Acoustic Wave by Transversely Isotropic Cylindrical Shells)

  • 김진연
    • 소음진동
    • /
    • 제7권3호
    • /
    • pp.449-455
    • /
    • 1997
  • A theoretical study is presented for the prediction of the scattering of obliquely incident plane acoustic wave by transversely isotropic cylindrical shells immersed in water. In dorder to illustrate the vailidity of the theory backscattering form functions are compared with the existing results for degenerated problems: the catterings by isotropic shell and transversely isotropic solid cylinder. The unidirectional fiber reinforced boron-aluminum composites are selected as a model of transversely isotropic materials having potential applications in practice. From the resonant scattering analysis of the partial backscattering form functions, the dispersion curves for fluid-borne Stoneley wave, guided wave along the shell, and the lowest three Lamb type waves can be found. The Lamb type dispersions are compared with those of the flat plate. The variation of anisotropy significantly affects the properties of circumferential waves. From these results, it can be possible to identify parametrically the material properties of anisotropic cylindrical targets.

  • PDF

횡등방성 암반의 침식에 따른 초기응력비 변화의 수치해석 연구 (A Numerical Study on the Variation of Initial Stress Ratio by Erosion of Transversely Isotropic Rock Mass)

  • 최미진;김원범;양형식
    • 터널과지하공간
    • /
    • 제14권5호
    • /
    • pp.339-344
    • /
    • 2004
  • 침식에 따른 횡방성 암반의 초기응력비 변화를 수치해석적으로 구하여 등방성의 경우 및 이론해와 비교한 결과 횡등방성의 영향은 크지 않아 초기지응력비가 작고 침식심도가 깊을 때만 고려하는 것이 좋을 것으로 판단되었다. 수치해석에 의한 응력과 이론적인 값의 차이는 초기 지응력비가 클수록 또 침식되는 깊이가 증가할수록 증가하였다. 또 침식 후의 초기응력비는 심도가 깊어짐에 따라 초기 응력비로부터 발산하였다. 이를 감안하여 침식에 따른 초기응력비 산정식을 제안하였다.

이방성 암석에 대한 탄성계수의 실험적 결정 (Determination of Elastic Constants of Transversely Isotropic Rocks)

  • 김호영
    • 터널과지하공간
    • /
    • 제5권4호
    • /
    • pp.318-322
    • /
    • 1995
  • For transversely isotropic rocks such as schist, shale, etc, a method to determine the anisotropic elastic constants was proposed. Theoretically, equations of elastic constants E1, E2, and G2 can be derived from the measured strains in arbitrary three directions. If we attach three strain gages in accordance with the directons of anisotropy on the rock specimen under uni-axial compression, anisotropic elastic constants can be determined by these equations. With this method, the degree of anisotropy of transversely isotropic rocks will be easily evaluated by simple laboratory test.

  • PDF

Analysis of wave motion in micropolar transversely isotropic thermoelastic half space without energy dissipation

  • Kumar, Rajneesh;Gupta, Rajani Rani
    • Interaction and multiscale mechanics
    • /
    • 제3권2호
    • /
    • pp.145-156
    • /
    • 2010
  • The propagation of waves in a micropolar transversely isotropic half space in the theory of thermoelasticity without energy dissipation are discussed. After developing the solution, the phase velocities and attenuation quality factor has been obtained. The expressions for amplitudes of stresses, displacements, microrotation and temperature distribution have been derived and computed numerically. The numerical results have been plotted graphically.

Thermomechanical interactions in transversely isotropic magneto thermoelastic solid with two temperatures and without energy dissipation

  • Lata, Parveen;Kaur, Iqbal
    • Steel and Composite Structures
    • /
    • 제32권6호
    • /
    • pp.779-793
    • /
    • 2019
  • The purpose of this research paper is to depict the thermomechanical interactions in transversely isotropic magneto thermoelastic solid with two temperatures and without energy dissipation in generalized LS theories of thermoelasticity. The Laplace and Fourier transform techniques have been used to find the solution of the problem. The displacement components, stress components, and conductive temperature distribution with the horizontal distance are computed in the transformed domain and further calculated in the physical domain numerically. The effect of two temperature and relaxation time are depicted graphically on the resulting quantities.

Effect of time harmonic sources on transversely isotropic thermoelastic thin circular plate

  • Lata, Parveen;Kaur, Iqbal
    • Geomechanics and Engineering
    • /
    • 제19권1호
    • /
    • pp.29-36
    • /
    • 2019
  • The present research deals with the deformation in transversely isotropic thin circular thermoelastic rotating plate due to time-harmonic sources. Frequency effect in the presence of rotation and two temperature is studied under thermally insulated as well as isothermal boundaries. The Hankel transform technique is used to find a solution to the problem. The displacement components, stress components, and conductive temperature distribution with the radial distance are computed in the transformed domain and further calculated in the physical domain using numerical inversion techniques. Some specific cases are also figured out from the current research.