• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.42-53
• /
• 2016

This study aims to evaluate the performance of Hook-turn operation with various sizes of bicycle waiting zone(WZ) and to determine the optimal size of bicycle WZ under various traffic and control circumstances. An extensive simulation study was performed to examine bicycle and vehicle delay trends for given experimental design. Results showed that vehicle delay was insensitive to the size of waiting zone, but bicycle delay was reduced as the size of waiting zone increased in general. The delay performance indicated a similar trend between with RTOR and without RTOR operation, but vehicle delay slightly increased and bicycle delay slightly decreased without RTOR. Regarding to optimal waiting zone size, 6 WZ was recommended for general conditions with RTOR, but 9 WZ was recommended when bicycle left-turn volume was greater than 120 v/h. 6 WZ was recommended for general conditions without RTOR, but 12 WZ was recommended when bicycle left-turn volume was greater than 90 v/h.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.30-44
• /
• 2020

The application of PPLT is difficult to analyze and judge only from the effects of the delay time. In this study, the application of PPLT was proposed using not only the delay time of PLT and PPLT due to the change in traffic volume and the number of opposite straight lanes but also the traffic volume of passing a left turn and the number of conflict risks as indicators. According to the analysis, the more left-turn traffic than capacity and the less opposite-straight volume, the greater the PPLT effect. On the other hand, if the left-turn traffic is below capacity, the delay time will be reduced partially, but the overall passing left turn volume will not increase, and the conflict risk will increase. In addition, the conflict risk increases in the third lane or higher. Moreover, the difference of passing left-turn volume between PLT and PPLT showed a pattern similar to the delay time difference, and the PPLT coverage was wider than the difference in delay time and was associated more with the conflict risk numbers. Therefore, it would be reasonable to use passing left-turn traffic primarily, consider the delay time below the left-turn capacity, and consider the conflicting risk numbers simultaneously at or above the opposite straight three lanes.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.579-588
• /
• 2014

In this study, three signal control strategies such as Bike box, Hook-turn, and 6-phase were assessed for various traffic conditions at signalized intersections incorporating bicycle left-turn traffic. Results showed that the size of a waiting zone mainly affected the performance of signal control in both Bike box and Hook-turn. Both Bike box and Hook-turn yielded an identical vehicle delay, but Bike box produced less bicycle delay than Hook-turn by 2.5~29.9 sec/veh for undersaturated traffic conditions. For saturated traffic condition, Bike box produced less vehicle delay than Hook-turn and 6-phase strategies, but bicycle delay was found to increase at the 700 vph of bicycle traffic compared to 6-phase. Bicycle delay was greatly increased under Hook-turn and Bike box strategies when bicycle traffic was greater than 300 vph and 500 vph, respectively. It was also shown that bicycle delay could be significantly reduced by providing appropriate size of queueing space. In addition, Bike box was likely to yield less vehicle and bicycle delay than Hook-turn for traffic volume patterns investigated in this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.62-73
• /
• 2020

Access management is aimed at preserving the road's high intercity mobility. In urbanized areas, immoderate acceleration lane-length requirements restrict the accessibility of land. Therefore, there are many opinions to revise the minimum acceleration lane-length requirement. For this purpose, it is important to diagnose the effects of slow vehicles on the mainline. This study analyzed a single merging vehicle's total delay occurrence depending on the mainline traffic flow rate and merging speed. A linear relationship was observed between the mainline traffic flow rate and total delay. As a merging speed increases gradually from 40km/h to 100km/h in 20km/h intervals, the total delay decreases by 5.0, 1.6, and 5.1 times, respectively. This shows that the ideal condition with the total delay is less than 0.5 vehicle·sec when there is no speed difference between the mainline and merging vehicle. On the other hand, given the one-second response time of drivers, the total delay occurrence was slightly low when the speed difference between the mainline and merging vehicle was less than 20km/h.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1629-1632
• /
• 2003

Generally an increasing number of recent applications have found TCP too limiting. There are some characteristics in the transmission of document and binary data which some transmission delay are tolerant but the content must completely be transferred. However voice signals are more sensitive with not some packet loss but some transmission delay. Therefore, Stream Control Transmission Protocol(SCTP) is proposed to minimize the delay and packet loss in the field of delivery of voice signal. SCTP is designed to transport PSTN signalling messages over IP networks, but is capable of broader applications. In this paper, the architecture of SCTP implementation is designed and some interface of SCTP software library which are implemented are specified.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.151-160
• /
• 2009

While portable and wireless devices are pouring, a new network technology is needed as a breakthrough. The new network technology features large delays, intermittent connectivity, and absence of an end-to-end path from sources to destinations. A network which has one of those characteristics is called DTNs(Delay Tolerant Networks). The main 4 routing methods have been researched so far in extream environment. In this paper, we look into the reliability of DTMNs(Delay Tolerant Mobile Networks) in several different situations, and propose an algorithm that selects a positive routine by sending the only information of its position when making a connection to a detected node. We simulate the proposed algorithm here in DTN using ONE simulator. As a result, it shows that the algorithm reduces the number of message transmission each node.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.65-72
• /
• 2003

Internet roundtrip delay/time (RTT) prediction plays an important role in detecting packet losses in reliable transport protocols for traditional web applications and determining proper transmission rates in many rate-based TCP-friendly protocols for Internet-based real-time applications. The widely adopted autoregressive and moving average (ARMA) model with fixed-parameters is shown to be insufficient for all scenarios due to its intrinsic limitation that it filters out all high-frequency components of RTT dynamics. In this paper, we introduce a novel parameter-varying RTT model for Internet roundtrip time prediction based on the information theory and the maximum entropy principle (MEP). Since the coefficients of the proposed RTT model are updated dynamically, the model is adaptive and it tracks RTT dynamics rapidly. The results of our experiments show that the MEP algorithm works better than the ARMA method in both RTT prediction and RTO estimation.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.673-678
• /
• 2008

In crushed service areas of Metro railway lines, there are problems such as the buildup discontent, the irregular operation time and rotation of rolling stocks, caused by frequently occurred train delay. Train delay is affected by operation conditions or infrastructure capacities such as train schedule, line capacity, car rotation plan, shunting movements at origin and destination, and also by transport demand characteristics. Furthermore, a delay produce another delays and spread over the following trains. So it is not easy to build up a protection and recovery plan. In this research, we conduct experimental analysis study based on the real metro data, and as a result, present the relation between the traffic demand and the dwell time. And finally, propose future research themes for improving the operation efficiency of metro railways.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.281-291
• /
• 2010

Scalable video coding (SVC) has been standardized as an extension of the H.264/AVC standard. This paper proposes a practical real-time transport protocol (RTP) packetization scheme to transport SVC video over IP networks. In combined scalability of SVC, a coded picture of a base or scalable enhancement layer is produced as one or more video layers consisting of network abstraction layer (NAL) units. The SVC NAL unit header contains a (DID, TID, QID) field to identify the association of each SVC NAL unit with its scalable enhancement layer without parsing the payload part of the SVC NAL unit. In this paper, we utilize the (DID, TID, QID) information to derive hierarchical spatio-temporal relationship of the SVC NAL units. Based on the derivation using the (DID, TID, QID) field, we propose a practical RTP packetization scheme for generating single RTP sessions in unicast and multicast transport of SVC video. The experimental results indicate that the proposed packetization scheme can be efficiently applied to transport SVC video over IP networks with little induced delay, jitter, and computational load.

• Journal of Korea Game Society
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2002

Multicast protocols are efficient methods of group communication such as video conference, Internet broadcasting and On-Line Game, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The Purpose or this Paper is to find a method to utilize multicast routers can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM(Scalable Reliable Multicast)method has been used. Three packets per TCP transmission control window site are used for transport and an ACK is used for flow control. A CBR(Constant Bit Rate) and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.