• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.135-143
• /
• 2014

목적: 국제표준에서 규정한 청색광위험함수를 도입하여 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 평가한다. 방법: 8개사 총41종의 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 구하기 위해 UV-VIS 분광광도계로 380~780 nm 범위에서의 분광투과율을 측정하였다. 청색광차단율은 ANSI Z80.3:2010 및 ISO 13666(한국표준 KS B ISO 13666:2004)에서 규정된 청색광위험함수를 도입하여 산출하였다. 결과: 전체 렌즈에 대한 청색광차단율 범위는 9.3%~96.8%, 투과율 범위는 53.5%~92.7%, 시감투과율 범위는 58.0%~98.1%이었다. 전반적으로 코팅 청색광차단렌즈는 시감투과율이 높은 경향이 있었고, 착색 청색광차단렌즈는 청색광차단율이 높은 경향이 있었다. 결론: 렌즈분광분포곡선의 분석으로부터 청색광차단렌즈의 성능을 향상시킬 수 있는 가능성이 있음을 확인할 수 있었다. 제조업체는 국제표준의 규정에 맞춰 성능을 평가할 수 있는 자체기술을 확보할 필요가 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.144-145
• /
• 2006

In this study, the Al doped ZnO thin films were prepared by the facing targets sputtering(FTS) apparatus. The electrical characteristics, transmittance of ITO thin films were investigated as a function of varying input current and oxygen gas flow rate. As a result, the ITO thin film was prepared with a resistivity $6{\times}10-4[{\Omega}-cm]$ and transmittance 80% at visible range.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.183-186
• /
• 2001

In this paper, the analytical model to understand the propagation of electromagnetic waves in the foam core sandwich structures was proposed. Using the analytical model, efforts were made to find the optimal stacking sequence of composite skins for maximum transmittance of electromagnetic wave. Numerical analyses of unidirectional composites and foam as a function of incident angle were performed. From the results of analysis, the general tendencies of transmittance of electromagnetic wave through composites and foam were obtained. Based on the general tendencies, optimal stacking sequences of composite skins for the maximum transmittance of electromagnetic wave were found with certain ranges of incident angle using genetic algorithm(GA).

• 한국재료학회지
• /
• 제34권7호
• /
• pp.315-320
• /
• 2024

In order to maximize the function and increase the compatibility of silicone hydrogel lens, this study compared and analyzed the properties of Amino modified silicone oil using mini and microemulsion technique, respectively. Optical and physical properties were evaluated by spectral transmittance, refractive index, water content, oxygen transmittance and contact angle measurements to evaluate the performance of the manufactured hydrogel lens. The spectral transmittance results revealed the copolymerization method lens showed 31 % of the visible light area, which did not satisfy the basic optical properties. However, the lens using the mini and microemulsion materials showed more than 90 % of the visible light area, satisfying the optical characteristics. In addition, all physical properties were superior to a basic hydrogel lens. The mini and microemulsion techniques effectively improved the stability and function of the ophthalmic hydrogel lens and are considered a promising ways of manufacturing an ophthalmic hydrogel contact lens with increased compatibility and stability.

• 한국안광학회지
• /
• 제6권2호
• /
• pp.37-46
• /
• 2001

본 연구에서는 착색 염료를 이용하여 염료의 혼색 비율과 착색 시간을 다양하게 하여 프라스틱렌즈를 착색하고 이 착색렌즈의 UV-Vis-IR 영역의 분광투과율과 색상의 변화를 측정하였다. 이 자료를 바탕으로 착색시간의 로그함수에 직선적 관계를 갖는 착색시간에 따른 파장별 분광투과율의 변화로부터 얻은 직선의 기울기를 스팩트럼합성에 이용하였으며 실험식을 만들어 실측치와의 일치여부를 검증한 결과 실험을 행하지 않고서도 transmittance와 color에 대한 ANSI Z80.3규정에의 부합여부를 용이하게 계측할 수 있었다.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.376-381
• /
• 2009

Indium Tin Oxide (ITO) thin films on Polyethylene Terephtalate (PET) substrate were prepared by Roll-to-Roll sputter system with targets of 5 wt% and 10 wt% $SnO_2$ at room temperature. The influence of the chromaticity (b*) and transmittance properties of the ITO Films were investigated. The ITO thin films were deposited as a function of the DC power, rolling speed, and Ar/$O_2$ gas flow ratio, and then characterized by spectrophotometer. Their crystallinity and surface resistance were also analyzed by X-ray diffractometer and 4-point probe. As a result, the chromaticity (b*) and transmittance of the ITO films were broadly dependent on the thickness, which was controlled by the rolling speed. When the ITO films were prepared with the DC power of 300 W and the Ar/$O_2$ gas flow ratio of 30/1 sccm using 10 wt% $SnO_2$ target as a function of the rolling speeds 0.01 through 0.10 m/min, its chromaticity (b*) and transmittance were about -4.01 to 11.28 and 75.76 to 86.60%, respectively. In addition, when the ITO films were deposited with the DC power of 400W and the Ar/$O_2$ gas flow ratio of 30/2 sccm used in 5 wt% $SnO_2$ target, its chromaticity (b*) and transmittance were about -2.98 to 14.22 and 74.29 to 88.52%, respectively.

• 한국안광학회지
• /
• 제20권3호
• /
• pp.355-362
• /
• 2015

목적: 확산적 흐림의 투과율이 시력과 대비감도에 미치는 영향에 대하여 알아보았다. 방법: 평균연령 $22.83{\pm}0.50$세의 대학생 30명(남 13명, 여 17명)을 대상으로 Optec$^{(R)}$ 6500으로 시력과 대비감도를 측정하였다. 확산적 흐림의 도구로 백내장 시뮬레이터용 확산필름을 사용하였고, 백내장의 진행 정도나 안개의 농도가 반영될 수 있도록 확산적 흐림의 투과율을 변화시키면서 측정하였다. 결과: 시력과 확산적 흐림의 투과율은 비례식 $VA(T)=1.84{\times}10^{-2}T-0.65$으로 맞춤되었다. 대비감도는 모든 공간주파수에서 감소하였는데, 고공간주파수 대역에서의 대비감도가 더 큰 영향을 받아 정상범위를 먼저 벗어났고 대비감도의 정점은 저공간주파수 방향으로 이동하였다. 대비감도함수들의 교차점으로부터 대비감도가 정상범위를 벗어나는 확산적 흐림의 투과율 및 정점공간주파수의 이동을 산출한 결과, 투과율이 약 78.70%이 되면 대비감도의 정점이 6 cpd에서 3 cpd로 이동하는 것으로, 그리고 약 69.71%이 되면 모든 공간주파수에서의 대비감도가 정상범위를 벗어나는 것으로 평가되었다. 결론: 확산적 흐림의 투과율의 감소는 시력의 저하와 더불어 대비감도의 감소, 정상범위의 이탈 및 정점대비감도 이동 등을 유발시켜 시각적 불편함을 일으킨다는 점에서 백내장이나 안개 운전 시에는 더 많은 주의가 요구된다.

• 한국의류학회지
• /
• 제43권4호
• /
• pp.592-604
• /
• 2019

This study examines the stealth function of sputtered fabric with an infrared thermal imaging camera in terms of the thermal and infrared (IR) transmittance characteristics. Various base fabrics were selected, infrared imaging was performed, and infrared transmittance was measured. By infrared camera experiment it was found that the sample was concealed because it had a similar color to the surroundings when the aluminum layer was directed toward the outside. In addition, a comparison of the infrared thermographic image of the untreated sample and the sputtered sample in the laboratory showed that the difference in ${\Delta}E$ value ranged from 31 to 90.4 and demonstrated effective concealment. However, concealment was not observed in the case of the 3-layer (Nylon-Al-Nylon) model when a sputtered aluminum layer existed between two nylon layers. The direction of the sputtering layer did not affect the infrared transmittance in the infrared transmittance experiment. Therefore, it seems better to interpret the concealing effect in the infrared thermographic images by using thermal transfer theory rather than infrared transmittance theory. We believe that the results of this study will be applicable to developing high performance smart clothing and military uniforms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1683-1685
• /
• 1999

ITO films on plastic substrate were prepared by DC magnetron sputtering method using powdery target and their properties were investigated as a function of the deposition conditions. As the sputtering power and total pressure were higher, the resistivity of ITO films increased. The optical transmittance deteriorated with increasing sputtering power and thickness. As the total pressure increased, however, the optical transmittance improved at visible region of light. From these results, we could deposited ITO films with $8{\times}10^{-3}{\Omega}-cm$ of resistivity and 80% of transmittance at optimal conditions.