• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.904-911
• /
• 2015

The objective of this study was to investigate the quality characteristics of traditional wine using an radio-frequency identification (RFID) system annexed to a fermenter. In this study, we proposed an RFID-based data transmission scheme for monitoring fermentation of traditional alcoholic beverages. The pH, total acidity, total sugar, soluble sugar, free sugar, alcohol content, and organic acids of were investigated and subjected to fermentation of traditional alcoholic beverages three times. The pH ranged from 7.98, 7.95, and 7.68 at day 0, decreased drastically to 3.31~2.96 at day 2, and then slowly increased to the end point, finally reaching 3.34 at day 20. Acidity tended to increase quickly with time, especially for all samples after day 2. The fermentation environment induced a sudden increase acidity in reactants and indicated a low pH. The total sugars during fermentation quickly decreased to the range of 20.3, 22.43, and 19.2% at day 2, and the slope of reduction steadily decreased to 5.1, 6.1, and 4.8% at day 10. On the other hand, the alcohol content showed the reverse trend as total sugars. The alcohol content also showed the same pattern as total acids, showing the highest alcohol content of 17.3% (v/v) on day 20. In this study on traditional wine fermentation using an RFID system, we showed that pH, soluble sugar, and alcohol content can be adopted as key indicators for quality control and standardization of traditional wine manufacturing.

• Journal of Legislation Research
• /
• no.44
• /
• pp.33-62
• /
• 2013

In this paper, the consolidation of ICT basic legislation and ICT special legislation concerning "Ministry of Science, ICT and Future Planning" and "Korea Communications Commission" which came on the back of governmental reorganization in recent years is discussed in the theoretical and practical aspect. Development of "data communication technology" innovatively changed the method of livelihood of mankind, the emergence of network under global dimension provided financial social benefit and posed a challenge and a threat at the same time. Form digital revolution human kind can expect to receive many important blessings. Nevertheless, there are many advantages of development of technology by digital revolution, cyberspace like online media, internet etc. has realistically many problems that must be solved. To maximum positive aspects like the expansion of freedom of expression and creating plan of economy by the advance of transmission technology is needed. And to minimize side effects of informatization is required more. The First, Special Act on ICT has an adaptation in normative standardization to be fit in media convergence beyond convergence of broadcasting and telecommunications. Henceforth, there must be established a legal basis for the achievement of protection of economic evolution and freedom of speech in digital media, information, communication technology and content development. The second, the government action is to accomplish economic development and freedom of information in structural aspect of norm. Therefore minimizing normative problem by reorganization of organization remains clearly unresolved in politics. The third, Special Act on ICT must be basic law covering info-communications field, pay telecommunication and media contents field. The forth, from a technical point of view, net neutrality, conflict of interest for digital content and so on can be fixed easily. Special Act on ICT must not only pursuit of development of industry. Special Act on ICT and pursuit of enhancing quality of life of people and preparing program to promote democratization. From now on, we need to make powerful nation of information& communications technology and in information human rights protection field got to be one step ahead of others with reference to appear all the various aspects must be brought together in the discussion of legislation process of Special Act on ICT.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.197-203
• /
• 2019

This study was carried out to investigate the effect of chlorine water and plasma gas treatment on the quality and microbial control of Latuca indica L. baby Leaf during storage. Latuca indica L. baby leaves were harvested from a plant height of 10cm. They were sterilized with $100{\mu}L{\cdot}L^{-1}$ chlorine water and plasma-gas (1, 3, and 6hours), and packaged with $1,300cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$ films and then stored at $8{\pm}1^{\circ}C$ and RH $85{\pm}5%$ for 25days. During storage, the fresh weight loss of all treatments were less than 1.0%, and the carbon dioxide and oxygen concentrations in packages were 6-8% and 16-17%, respectively for all treatments in the final storage day. The concentration of ethylene in the packages fluctuated between $1-3{\mu}L{\cdot}L^{-1}$ during the storage and the highest concentration of ethylene was observed at 6 hours plasma treatment in the final storage day. The off-odor of all treatments were almost odorless, the treatments of chlorine water and 1 hour plasma maintained the marketable visual quality until the end of storage. Chlorophyll content and Hue angle value measured at the final storage day were similar to those measured before storage in chlorine water and 1 hour of plasma treatments. E. coli was not detected immediately after sterilization in all sterilization treatments. After 6 hours of plasma treatment, the total bacteria fungus counts were lower than the domestic microbial standard for agricultural product in all sterilization treatments. The total aerobic counts in the end storage day increased compared to before storage, whereas E. coli was not detected in all sterilization treatments. The sterilization effect against bacteria and fungi was the best in chlorine water treatment. Plasma treatment showed sterilization effects, but within a prolonged period of time. In addition, the sterilization effect decreased gradually. These results suggest that chlorine water and plasma treatment were effective in maintaining Latuca indica L. baby Leaf commerciality and controlling microorganisms during postharvest storage.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.2
• /
• pp.5-25
• /
• 2008

Seoul's community beliefs originated from the ritual performed by the shrines affiliated to each government office in the Joseon Dynasty. Lower branches of government officials were assigned to perform these rituals. Generally, these shrines were called Bugundang(府君堂). Records show that Bugundang(府君堂) was generally one to three units and enshrined the portrait of Bugun(府君), the worshipped, inside. According to historical records, the worshipped were mostly General Choi Young(崔瑩將軍) or Madame Song(宋氏夫人). In fact, however, each Bugundang(府君堂) worshipped different persons. Some of the worshipped were historical characters from the Goryeo Dynasty or the founding period of Joseon Dynasty, Guan Yu(關羽) and Zhuge Liang(諸葛孔明) that became gods after the Japanese Invasion of 1952, Wanggun(王建), Dangun(檀君), General Nam Yi(南怡將軍), Kim Yoo Shin(金庾信), Lim Gyeong Up (林慶業), King Gongmin(恭愍王), King Taejo(Lee Sung Gye, 太祖 李成桂), Joban(趙?) who is one of the supporters of the foundation of Joseon Dynasty, Sir Hong(洪氏大監) and his women who appear in the legend of Nanhansanseong(南漢山城) area, and many other historical figures. It is difficult to compare the rituals of these shrines from community Gut(Shaman ritual) performances of Seoul. According to historical records, Gut and ceremony coexisted in rituals. As time passed, these rituals spread as the community Beliefs of commoners and have been transmitted in the context of Seoul's cultural change. This study examined the existence of affiliated shrines of local government offices in the Joseon Dynasty and discussed the cases of Jangchung-dong Gwanseong Shrine(將忠洞 關聖廟), Bangsan-dong Seongje Shrine(方山洞 聖帝廟), and Seobinggo Bugundang(西氷庫 府君堂) to trace the succession of rituals at these shrines as folk customs of commoners. Bangsan-dong Seongje Shrine(方山洞 聖帝廟) spread to the public as Gwanwoo(關羽), who was considered the god of soldiers, transformed into the god of merchants along with historical transition. It clearly shows the process as to how merchants from a certain region developed a community religion. Jangchung-dong Gwanseong Shrine(將忠洞 關聖廟) is Bugundang(府君堂) of the soldiers of Nampyoug(南營). As the ritual was succeeded by a ritual group called Yeoungsinsa(永信社), composed of nearby residents, it was naturally spread and succeeded by the residents in local community. Seobinggo Bugundang(西氷庫 府君堂) was related to the changes in the historical background of ice gathering in the late Joseon Dynasty.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.99
• /
• pp.50-71
• /
• 2021

The Five-story Stone Pagoda from the Dongsa-ri Temple Site in Buyeo, dated to early Goyeo Dynasty, is valuable in that it is the southernmost example of the capital Kaesong pagoda style. This pagoda exhibits characteristics of the central Goryeo style featured in the pagodas built in and around the capital Kaesong, such as the diagonally curved section of the support for the cover stone above the upper stereobate. It also shares stylistic affinities with eleventh-century stone pagodas. The ansangmun (elephant eye patterns) in the lower stereobate of the Dongsa-ri Five-story Stone Pagoda resemble those in the pedestal of the Stone Seated Buddha (which was likely repaired in 1028 during the reign of King Hyeonjong), at the Jeongrimsa Temple site in Buyeo. It also reflects elements found in the flagpole supports from the Cheonheungsa Temple site in Cheonan. The sculpting techniques used in these patterns are also similar. Such congruencies suggest that the Dongsa-ri Five-story Stone Pagoda was built in the eleventh century. The Dongsa-ri Temple Site in Buyeo, located near the Geumgang River, served as a principal route for transporting grain-tax during the Goryeo Dynasty. It was also situated along the way to the Goryeo royal temple, Gaetaesa Temple. The geographical significance of the site and the extensive repairs undertaken at Jeongrimsa Temple during the reign of King Hyeonjong (r. 1009-1031) of the Goryeo Dynasty appear to have impacted the production of the Dongsa-ri Five-story Stone Pagoda. The Dongsa-ri Five-story Stone Pagoda also bears stylistic resemblances to the stone pagoda and flagpole supports found at neighboring Cheonheungsa Temple, which is presumed to be related to the establishment of Honggyeongsa (or Honggyeongwon) Temple in 1021 in Cheonan. This indicates the route of the transmission of the Kaesong pagoda style. The Five-story Stone Pagoda from the Dongsa-ri Temple Site pays testimony to the cultural accomplishments of eleventh-century stone artworks in Buyeo and adjacent regions. This pagoda embodies the majestic and assertive aesthetics that define of the Goryeo Dynasty, as do early Goryeo colossal Buddhist sculptures, including the Stone Standing Maitreya Bodhisattva at Daejosa Temple in Buyeo, the Stone Standing Buddha Triad at Gaetaesa Temple in Nonsan, and the Stone Standing Maitreya Bodhisattva at Gwanchoksa Temple in Nonsan. All of these bear similarities to the massive stone lantern and pagoda at Hyeonhwasa Temple in the capital Kaesong. The production of the light, sleek, sharp, and sophisticated Dongsa-ri Five-story Stone Pagoda is presumed to reflect the maturity of the cultural competence of the people in Dongsa-ri, Buyeo under the influence of Buddhist culture from the capital Kaesong during the eleventh century, a time marked by active cultural exchanges among regions.

• The Journal of Korean Philosophical History
• /
• no.56
• /
• pp.9-46
• /
• 2018

Seongdeokdaewang-Shinjong, the 29th National Treasure, is highly valuable as a study material in various aspects including the histories of ideology, Buddhism, politics, art-craft, Chinese character study, calligraphy, epigraphy and so on of the mid-time of Shinra. Compared with the people's interest in the Shinjong, however, the studies on the words carved on it have not been yet deepened. Such studies have not been yet overcoming the phase of decoding and translation of the words. Today, it is required to analyze and study the words systematically. This article starts with such critical mind. That is why the subtitle of this article is Research on the Background of Thoughts considering that this study must be followed by its 2nd study. This study has totally reviewed the decoding and annotation works that have been done so far. Byeonryeomun (騈儷文: a writing style of Chinese character) has been also studied on its written patterns. As a result, approximately 20 problems have been found and corrected. Especially, such key phrases as '工匠?模' and '日月?暉' have been translated in a new way to spotlight the importance of translation of the carved words. The words carved on the Shinjong are highly valuable to study in the aspect of ideology history. The words fully show not only Buddhist thoughts, Confucian thoughts and Taoist thoughts but also Korea's own unique thoughts, which are all melted in the words without any obstacle to each other. In general, they are highly philosophical words. The words are unique especially in the aspect: They give a meaning to the Shinjong based on the keyword Won-Gong (圓空: circle and empty) and suggest the key point of Buddhist thoughts and governing philosophy altogether. That is, they imply that King Seongdeok's political ideology and governing principle are connected to Pungryudo (風流道), Korea's own unique philosophy. This implication is key evidence that makes it possible to trace the context of transmission of Pungryudo. You should not miss also the phrases implying that there was a big argument between reform group based on Confucian thoughts and conservative group based on Korea's own unique thoughts.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.