• 제목/요약/키워드: transmission power

검색결과 5,780건 처리시간 0.035초

LED를 응용한 VLC 정보 네트워크 시스템 구성 연구 (LED application VLC information network system configuration research)

  • 이준명;장태수;강형길;김용갑
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.13-14
    • /
    • 2012
  • LED(Light Emitting Diode) 소자는 현대 기술의 발달로 형광등이나 전구보다 수명이 길고 전력소모가 작으며 제어가 쉽다는 장점을 가지고 있다. 이러한 이유로 LED 소자를 이용한 조명이 많이 사용되고 있다. LED를 이용한 광통신 기술은 LED를 이용한 조명기술이 발전하면서 무선통신으로 다시금 주목 받고 있는 기술이다. LED 조명을 이용하여 본 연구에서는 PC모듈 기반으로 LED의 White 조명을 이용한 VLC(Visible Light Communication) 송 수신기 모듈의 정보 전송 시스템을 구현하고 전송 기술의 성능을 분석하였다. 초기 거리 값은 ~ 50cm 이상으로 하여 정보를 전송할 수 있는 시스템을 이루었으며, LED 모듈의 효율을 증가시키기 위해 렌즈의 유무에 따라 효율이 다른 것을 확인할 수 있었으며, 구현된 연구의 성능을 분석하고 응용방법과 가능성에 대하여 확인하고자 한다.

  • PDF

On Optimizing Route Discovery of Topology-based On-demand Routing Protocols for Ad Hoc Networks

  • Seet, Boon-Chong;Lee, Bu-Sung;Lau, Chiew-Tong
    • Journal of Communications and Networks
    • /
    • 제5권3호
    • /
    • pp.266-274
    • /
    • 2003
  • One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

WCDMA 시스템에서 극성 변조를 이용한 빠른 셀 탐색 알고리즘 (Fast Cell Search Algorithm using Polarization Code Modulation(PCM) in WCDMA Systems)

  • 배성오;임재성
    • 한국통신학회논문지
    • /
    • 제27권8B호
    • /
    • pp.809-818
    • /
    • 2002
  • 본 논문에서는 3GPP 표준인 WCDMA 시스템에 호환성을 유지하면서 적용될 수 있는 새로운 셀 탐색 알고리즘을 제안한다. 기존 WCDMA 시스템에서는 2개의 동기 채널(P-SCH 및 S-SCH)을 이용하여 셀 탐색을 수행하는데 반해 제안하는 셀 탐색 알고리즘은 하나의 동기 채널만을 이용하여 슬롯 동기와 프레임 동기 그리고 코드 그룹 아이디를 획득할 수 있다. 이를 위하여 제안하는 알고리즘에서는 기존 WCDMA의 P-SCH에 극성 코드를 이용한 극성 변조를 수행함으로써 스크램블링 코드의 그룹핑 정보를 전송한다. 제안하는 셀 탐색 알고리즘은 기존 WCDMA 셀 탐색 알고리즘에 비해 하나의 동기 채널만을 이용하기 때문에 기지국에서 송신 신호의 이득을 얻을 수 있으며 동시에 수신기의 복잡도를 줄일 수 있는 특징을 갖는다. 제안하는 알고리즘은 특히 SNR 좋지 못한 채널 환경에서 기존 셀 탐색 알고리즘에 비하여 셀 탐색 시간면에서 우수한 성능을 보임을 시뮬레이션을 통하여 검증하였다.

데이터 스푸핑 탐지를 위한 유휴 시간 측정 시스템 설계 (Design of Idle-time Measurement System for Data Spoofing Detection)

  • 정성모;송재구;김태훈;소요환;김석수
    • 한국산학기술학회논문지
    • /
    • 제11권1호
    • /
    • pp.151-158
    • /
    • 2010
  • 국내/외 산업기반시설들은 악의적인 사용자로부터 받은 공격으로 인해 큰 피해를 받고 있다. 특히, 전력, 댐, 철도, 원자력 등과 같은 국가 주요핵심기반시설이 피해를 입었을 경우 그 피해는 경제적인 문제뿐만 아니라, 국민의 생명과도 직결될 수 있다. 이러한 국가 주요핵심기반시설은 Modbus RS485통신을 사용하는 SCADA 시스템으로 구성되어 있는 것이 일반적이며, 이러한 특성상 SCADA 시스템에서 직접 명령을 전달하는 RTU Master와 Slave는 RJ11 케이블로 연결되어 있다. RJ11 케이블의 전송 범위는 1km정도로 대역이 넓기 때문에 케이블에 물리적인 접속을 통하여 데이터 스푸핑이 가능하다. 따라서 본 논문에서는 최근 보안 중요성이 대두되고 있는 국가 주요핵심기반시설 내의 SCADA 시스템 보안 향상을 위하여 데이터 스푸핑 탐지를 위한 유휴 시간 측정 시스템을 설계하였다.

양방향 RF 통신을 이용한 초소형 오토 샤클 설계 및 구현 (Design and Implementation of Miniaturized Auto Shackle using Duplex RF Transmission)

  • 강석엽;황인규
    • 한국통신학회논문지
    • /
    • 제32권10A호
    • /
    • pp.1050-1056
    • /
    • 2007
  • 모든 공사 현장에서 철골 세우기 작업시 철골 보, 기둥(H 빔) 등의 이동을 위하여 크레인에 샤클을 부착하여 사용하고 있다. 이때 사용되는 샤클의 해체 작업은 높은 곳으로 올라가 수동으로 해야 하므로 안전사고의 위험성이 높고, 작업의 효율성이 떨어지며, 이는 시공비의 증가로 이어진다. 본 연구에서는 건설현장에서 실용적으로 사용할 수 있는 양방향 RE 통신을 이용한 초소형, 초경량, 저전력, 저가의 오토 샤클을 설계 구현하였으며, 기존 오토 샤클과는 다른 새로운 동작원리와 구조를 채택함으로서 우수한 원격 모니터링, 제어 기능을 갖출 수 있었다. 연구 결과는 여러가지 건설 장비의 원격 제어용으로 응용이 가능하며, 건설장비의 첨단화를 가속화 시킬 것으로 판단된다.

완전삽입형 인공망막 구현을 위한 인공망막모듈 개발 (Development of Retinal Prosthesis Module for Fully Implantable Retinal Prosthesis)

  • 이강욱;카이호 요시유키;후쿠시마 타카후미;타나까 테츠;고야나기 미쯔마사
    • 대한의용생체공학회:의공학회지
    • /
    • 제31권4호
    • /
    • pp.292-301
    • /
    • 2010
  • To restore visual sensation of blind patients, we have proposed a fully implantable retinal prosthesis comprising an three dimensionally (3D) stacked retinal chip for transforming optical signal to electrical signal, a flexible cable with stimulus electrode array for stimulating retina cells, and coupling coils for power transmission. The 3D stacked retinal chip is consisted of several LSI chips such as photodetector, signal processing circuit, and stimulus current generator. They are vertically stacked and electrically connected using 3D integration technology. Our retinal prosthesis has a small size and lightweight with high resolution, therefore it could increase the patients` quality of life (QOL). For realizing the fully implantable retinal prosthesis, we developed a retinal prosthesis module comprising a retinal prosthesis chip and a flexible cable with stimulus electrode array for generating optimal stimulus current. In this study, we used a 2D retinal chip as a prototype retinal prosthesis chip. We fabricated the polymide-based flexible cable of $20{\mu}m$ thickness where 16 channels Pt stimulus electrode array was formed in the cable. Pt electrode has an impedance of $9.9k{\Omega}$ at 400Hz frequency. The retinal prosthesis chip was mounted on the flexible cable by an epoxy and electrically connected by Au wire. The retinal prosthesis chip was cappted by a silicone to pretect from corrosive environments in an eyeball. Then, the fabricated retinal prosthesis module was implanted into an eyeball of a rabbit. We successfully recorded electrically evoked potential (EEP) elicited from the rabbit brain by the current stimulation supplied from the implanted retinal prosthesis module. EEP amplitude was increased linearly with illumination intensity and irradiation time of incident light. The retinal prosthesis chip was well functioned after implanting into the eyeball of the rabbit.

왕겨를 통한 실리카 나노스페어의 제작과 특성 (Fabrication and property of silica nanospheres via rice-husk)

  • 임유빈;곽도환;;이현철;김영순;양오봉;신형식
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.619-619
    • /
    • 2009
  • Recently, silica nanostructures are widely used in various applicationary areas such as chemical sensors, biosensors, nano-fillers, markers, catalysts, and as a substrate for quantum dots etc, because of their excellent physical, chemical and optical properties. Additionally, these days, semiconductor silica and silicon with high purity is a key challenge because of their metallurgical grade silicon (MG-Si) exhibit purity of about 99% produced by an arc discharge method with high cast. Tremendous efforts are being paid towards this direction to reduce the cast of high purity silicon for generation of photovoltaic power as a solar cell. In this direction, which contains a small amount of impurities, which can be further purified by acid leaching process. In this regard, initially the low cast rice-husk was cultivated from local rice field and washed well with high purity distilled water and were treated with acid leaching process (1:10 HCl and $H_2O$) to remove the atmospheric dirt and impurity. The acid treated rice-husk was again washed with distilled water and dried in an oven at $60^{\circ}C$. The dried rice-husk was further annealed at different temperatures (620 and $900^{\circ}C$) for the formation of silica nanospheres. The confirmation of silica was observed by the X-ray diffraction pattern and X-ray photoelectron spectroscopy. The morphology of obtained nanostructures were analyzed via Field-emission scanning electron microscope(FE-SEM) and Transmission electron microscopy(TEM) and it reveals that the size of each nanosphares is about 50-60nm. Using the Inductively coupled plasma mass spectrometry(ICP-MS), Silica was analyzed for the amount of impurities.

  • PDF

Energy-Aware Preferential Attachment Model for Wireless Sensor Networks with Improved Survivability

  • Ma, Rufei;Liu, Erwu;Wang, Rui;Zhang, Zhengqing;Li, Kezhi;Liu, Chi;Wang, Ping;Zhou, Tao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권7호
    • /
    • pp.3066-3079
    • /
    • 2016
  • Recent years have witnessed a dramatic increase in topology research of wireless sensor networks (WSNs) where both energy consumption and survivability need careful consideration. To balance energy consumption and ensure survivability against both random failures and deliberate attacks, we resort to complex network theory and propose an energy-aware preferential attachment (EPA) model to generate a robust topology for WSNs. In the proposed model, by taking the transmission range and energy consumption of the sensor nodes into account, we combine the characters of Erdős -Rényi (ER) model and Barabasi-Albert (BA) model in this new model and introduce tunable coefficients for balancing connectivity, energy consumption, and survivability. The correctness of our theoretic analysis is verified by simulation results. We find that the topology of WSNs built by EPA model is asymptotically power-law and can have different characters in connectivity, energy consumption, and survivability by using different coefficients. This model can significantly improve energy efficiency as well as enhance network survivability by changing coefficients according to the requirement of the real environment where WSNs deployed and therefore lead to a crucial improvement of network performance.

뇌조직의 리포푸신, 아세틸콜린 및 그 관련효소 활성에 미치는 누에분말의 영향 (Effects of Silkworm(Bombyx mori L..) Powder on Lipofuscin, Acetylcholine and Its Related Enzyme Activities in Brain of Rats)

  • 최진호;김대익;박수현;김정민;조원기;이희삼;류강선
    • 생명과학회지
    • /
    • 제10권6호
    • /
    • pp.564-569
    • /
    • 2000
  • This study was designed to investigate the effect of silkworm (Bombyx mori L.) powder on lipofuscin, acetylcholine (ACh) and its related enzyme activities in brain of rats. Sprague-Dawley (SD) male rats ($160{\pm}10g$) were fed basic diet (control group), and experimental diets (SWP-200 and SWP-400 groups) added 200 and 400 mg/kg BW/day for 6 weeks. In case of liver membranes, lipofuscin (LF) levels resulted in a slight decreases (4.6% and 11.5%, respectively) in SWP-200 and SWP-400 groups compared with control group. But in case of barin as the most sensitive organ, LF levels were remarkably inhibited about 16.7% and 20.0% in SWP-200 and SWP-400 groups compared with control group. There were no significant differences in acetylcholine (ACh) syntheses as a very important neurotransmitter, and choline acetyltransferase (ChAT) activities as a synthesis enzyme of ACh, and acetylcholinesterase (AChE) activities as a hydrolysis enzyme, which were concerned in transmission of neuron through synapses in brain of SWP-200 and SWP-400 groups compared with control group. Monoamine oxidase-B (MAO-B) activities were significantly inhibited (about 10.2%) in brain of SWP-400 groups compared with control group. These results suggest that inhibiting effects of LF accumulation and MAO-B activity of silkworm powder (SWP) may play a pivotal role in attenuating a various age-related changes for improvement of brain function.

  • PDF

곡률 커플링 접촉각에 따른 접촉 강성 및 굽힘 강성해석 (Analysis of Contact Stiffness and Bending Stiffness according to Contact Angle of Curvic Coupling)

  • 유용훈;조용주;이동현;김영철
    • Tribology and Lubricants
    • /
    • 제34권1호
    • /
    • pp.23-32
    • /
    • 2018
  • Coupling is a mechanical component that transmits rotational force by connecting two shafts. Curvic coupling is widely used in high-performance systems because of its excellent power transmission efficiency and easy machining. However, coupling applications change dynamic behavior by reducing the stiffness of an entire system. Contact surface stiffness is an important parameter that determines the dynamic behavior of a system. In addition, the roughness profile of a contact surface is the most important parameter for obtaining contact stiffness. In this study, we theoretically establish the process of contact and bending stiffness analysis by considering the rough surface contact at Curvic coupling. Surface roughness parameters are obtained from Nayak's random process, and the normal contact stiffness of a contact surface is calculated using the Greenwood and Williamson model in the elastic region and the Jackson and Green model in the elastic-plastic region. The shape of the Curvic coupling contact surface is obtained by modeling a machined shape through an actual machining tool. Based on this modeling, we find the maximum number of gear teeth that can be machined according to the contact angle. Curvic coupling stiffness is calculated by considering the contact angle, and the calculation process is divided into stick and slip conditions. Based on this process, we investigate the stiffness characteristics according to the contact angle.