• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.96-103
• /
• 2005

We designed the compound CVT(Continuously Variable Transmissions) by combining power circulation mode and power split mode, which have been proposed for connecting 2K-H I differential gear to the V- belt type CVU(Continuously Variable Unit), as an input coupled type. With the designed compound CVT, we carried out theoretical analysis and performance experiments for efficiency, speed ratio, power flow, and power transmission ratio. We proved that the compound CVT had a better performance than either of the power circulation mode or power split mode.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.907-915
• /
• 2003

유선 통신환경과 비교해서 무선 자원이 부족한 무선 환경에서는 매우 효율적인 패킷 전송 방식이 필요하다. 일반적으로는 이중 모드 패킷 전송 방식이 널리 사용된다. 스위칭 기준에 따라서, 패킷은 전용채널이 할당되거나 또는 공통의 채널을 통해서 전송된다. 일반적인 기준은 패킷의 길이와 생성 주파수이다. 즉 크고 발생 빈도가 높은 패킷은 전용 채널을 통해서 전송되고 작고 발생빈도가 낮은 패킷은 공통 채널을 통해서 전송된다. 이중 모드 패킷 전송 방식의 성능은 스위칭 기준과 밀접한 관련이 있다. 그렇지만 최적의 스위칭 포인트를 찾는 것은 매우 힘드는데 스위칭 포인트가 고정되어 있는 것이 아니라 트래픽 부하와 생성된 패킷의 길이와 채널의 수와 같은 환경에 따라 변동하기 때문이다. 본 논문에서는 동적 스위칭 임계점(dynamic switching threshold)을 이용하는 이중 모드 패킷 전송 방식을 위한 새로운 기법을 제안한다. 이 방식에서는 스위칭 임계값이 네트워크 환경에 따라서 변동한다. 제안한 방식의 성능은 시뮬레이션을 통해 분석하였다. 시뮬레이션 결과는 기존의 이중 모드 패킷 전송 방식과는 달리 제안한 방식의 성능이 네트워크 환경의 영향을 그다지 받지 않음을 보여준다.

• 오토저널
• /
• 제15권3호
• /
• pp.36-46
• /
• 1993

In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

• 한국정보기술학회 영문논문지
• /
• 제10권1호
• /
• pp.57-69
• /
• 2020

In general, many IoT devices, including smart phones, use LTE, Wi-Fi, and Bluetooth, and these communication modules generate a lot of energy consumption during periodic data transmission. This paper proposes a method of the data transmission mode change for improving energy efficiency in various communication environments that mobile devices may encounter. We propose an algorithm for setting the mode considering energy efficiency, data transmission performance and cost when the mobile device transmits data, and transmitting the data in an optimized manner according to the state of the mobile device. The proposed algorithm is implemented through experiments on energy efficiency for each communication module, and the scenario is used to verify how efficiently the proposed algorithm uses energy.

• 한국멀티미디어학회논문지
• /
• 제18권4호
• /
• pp.492-498
• /
• 2015

In general, data packets from sensor nodes are transferred to the sink node in a wireless sensor networks. So many data packets are gathered around the sink node, resulting in significant packet collision and delay. In this paper, we propose an efficient packet transmission mechanism for multi-hop wireless sensor networks. The proposed mechanism is composed of two modes. One mode works between sink node and 1-hop nodes from sink. In this mode, data packets are transmitted in predefined time slots to reduce collisions. The other mode works between other nodes except sink node. In this mode, duplicated packets from neighbor nodes can be detected and dropped using some control signals. Our numerical analysis and simulation results show that our mechanism outperforms X-MAC and RI-MAC in terms of energy consumption and transmission delay.

• Journal of Information Display
• /
• 제9권1호
• /
• pp.6-13
• /
• 2008

Mobile phones use the embedded memory in LDI (LCD Driver IC). In memory accessing mode, data overlapping phenomenon can occur. These days, various contents such as DMB, Camera, Game are merged to phone. Accordingly, with more data transmission, there would be more data overlapping phenomenon in memory accessing mode. Human eyes perceive this data overlapping phenomenon as simply horizontal line noise. The cause of the data overlapping phenomenon was analysed in this paper. The data overlapping phenomenon can be changed by the speed of data transmission between the host and LDI. The optimum memory accessing position can be defined. This paper proposes a new algorithm for avoiding data overlapping.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

• 한국음향학회지
• /
• 제39권6호
• /
• pp.585-591
• /
• 2020

적응형 전송 기법은 수중 음향 채널의 상태에 따라 전송 파라미터를 변경하여 전송 및 성능을 향상 시키는 효율적인 방법이다. 본 논문에서는 적응형 전송 기법에서 전송 모드를 결정하기 위한 네 가지 모드와 이의 모드를 검출하기 위한 세 가지 임계값 검출 알고리즘을 제안한다. 송신기에서 정보비트의 크기를 자유롭게 설정하기 위하여 컴볼루션 부호를 사용하였으며, 수신기에서는 성능을 향상시키기 위하여 BCJR 복호 기반 터보등화기법을 적용하였다. 또한 수중 실험을 통해 각 모드에서 성능을 만족하는 임계값 간의 관계를 분석하였다.

• 한국IT서비스학회지
• /
• 제9권2호
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.

• 한국산업정보학회논문지
• /
• 제12권5호
• /
• pp.14-22
• /
• 2007

PACS is an integrated communication network system which is consists of image acquisition devices, storage archiving units, display stations, computer processors, and database management systems. In medical industry, they have been introduced the medical equipments through PACS systems based on the DICOM standard. In this paper, we have reviewed the visual quality performance of various JPEG and JPEG2000 compression options for medical images. Through the realized the transmission mode on DICOM standard, the developed DICOM viewer has been shown in medical applications.