• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.135-148
• /
• 2015

The cutout hole locating at the place of rib-to-diaphragm welded connection is adopted to minimize the restraint, which is caused by the floor-beam web to rib rotation at the support due to the unsymmetrical loads in orthotropic deck. In practice, an inevitable problem is that there is a large number of welding joint's cracks formed at the edge of cutout hole. In this study, a comparative experiment is carried out with two types of cutout hole, the circular arc transition and the vertical transition. The fatigue life estimation of specimens is investigated with the application of the structural hot spot stress approach by finite element analyses. The results are compared with the ones of the fatigue tests which are carried out on these full-scale specimens. Factors affecting the stress range are also studied.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.323-328
• /
• 2019

In this paper, a method of constructing an advanced sequential circuit over finite fields is proposed. The method proposed an algorithm for assigning all elements of finite fields to digital code from the properties of finite fields, discussed the operating characteristics of T-gate used to construct sequential digital system of finite fields, and based on this, formed sequential circuit without trajectory. For this purpose, the state transition diagram was allocated to the state dependency code and a whole table was drawn showing the relationship between the status function and the current state and the previous state. The following status functions were derived from the status function and the preceding table, and the T-gate and the device were used to construct the sequential circuit. It was confirmed that the proposed method was able to organize sequential digital systems effectively and systematically.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.495-497
• /
• 2005

A new small signal stability analysis method for eigenvalue analysis is presented. This method is called RCF method and based on the computation of the state transition equations and state transition matrix over a specified time interval that corresponds to one or some cycle operations of the system. This method is applicable to any system with or without switching elements. As an applicable example of RCF method in power system, the one machine infinite bus system connected switching SVC at generator terminal is investigated and the results proved that variations of oscillation modes after switching operations can be calculated exactly.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1331-1334
• /
• 2004

Wet/Dry phenomena typically incorporate a number of complex flow mechanism. These include a momentum transfer and turbulent mixing caused by the delivery of water. However currently available one dimensional schemes applicable to wet/dry process cannot effectively simulate such process. Two dimensional finite element model, SU/PG, is used to simulate complex flow in this study. The Wetted Area Method in SU/PG allows elements to transition gradually between wet and dry states. The model is applicable to a straight river reach with irregular bathymetry. Wet/dry calculation using the wetted area method can simulate simple numerical test. The computed results of velocity vectors and water depth agree with those of observed. The methodology Presented in this study will contributed to two-dimensional wet/dry analysis in a river in this country.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.37-44
• /
• 2003

In this proposed work, computational, finite element model far multi-delaminated plates will be developed. In the current analysis procedures of multi-delaminated plates, different elements are used at delaminated and undelaminated region separately. In the undelaminated region, plate element based on Mindlin plate theory is used in order to obtain accurate results of out-of-plane displacement of thick plate. And for delaminated region, plate element based on Kirchhoff plate theory is considered. To satisfy the displacement continuity conditions, displacement vector based on Kirchhoff theory is transformed to displacement of transition element. Element mass and stiffness matrices of each region (delaminated, undelaminated and transition region) will be assembled for global matrix.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.823-832
• /
• 1987

This pper presents a method for constructing multiple-valued logic sequential machines based on Galois field. First, we assign all elements in GF(2**m) to bit codes using mathematical properties of GF(2**m). Then, we realized the sequencial machine circuits with and withoutm feed-back. 1) Sequential machines with feed-back are constructed by using only MUX from state-transition diagram expressing the information of sequential machines. 2) Sequential machines without feed-back are constructed by following steps. First, we assigned states in state-transition disgram to state bit codes, then obtained state function and predecessor table explaining the relationship between present states and previous states. Next, we obtained next-state function from state function and predecessor table. Finally we realized the circuit using MUX and decoder.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.124-128
• /
• 2000

The high Tc phase disappeared and low Tc phase increased in the substitution of transition elements for Bi ions. The high Tc phase decreased in the substitution of Si and Sn for Bi ions. The high Tc phase increased in the substitution of Sb, As and P which were the same group of Bi for Bi ions. The substitution of P ions was the most effective and then the high Tc phase was formed in large quantity by replacing Bi ions with 30% of P ions.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.74-83
• /
• 2016

A new family of zero-voltage-transition converters with synchronous rectification is introduced in this study. Soft switching condition for all the converter operating points is provided in the proposed converters. The reverse recovery losses of the rectifier switch body diode are also eliminated. In comparison with the main switch voltage stress, the auxiliary switch voltage stress is reduced significantly. The auxiliary switch does not need the floating gate drive. The auxiliary inductor is coupled with the main converter inductor, and the leakage inductor is used as the resonance inductor. Thus, all inductors of the proposed converter can be implemented on a single core. The other features of the proposed converters include no extra voltage and current stresses on the main converter semiconductor elements. Theoretical analysis for a synchronous buck converter is presented in detail, and the validity of the theoretical analysis is justified with the experimental results of a prototype buck converter with 180 W and 80 V to 30 V.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.150-157
• /
• 2010

We proposed a $4{\times}8$ array antenna with aperture-coupled patch antenna elements. The antenna was designed for 60 GHz operation and fabrication on the low-temperature cofired ceramic(LTCC) substrate($\varepsilon_r$=5.8). The feedline with the stub was designed to enhance the radiating element bandwidth and the transition characteristics between the waveguide (WG) and microstrip line(MSL). Through the optimization of the antenna and feedline geometry, the antenna gain and the performance of the 10 dB bandwidth were 20.2 dBi and 13 % up, respectively. The measured results agreed with the simulated ones.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.207-210
• /
• 1997

The drastic structural changes in telecommunications industry are imposing new strains on operators, regulators and customers. Many researchers have offered diverse frameworks for the changes from the perspectives of sociology, technology, and/or economics. However, there have been few attempts to document the competitive phenomena from management perspectives because of the technological complexities and dynamism in the fundamental transition of competition. In this study, we examine competitive environment in telecommunications industry, and identified five structural elements; telecom operator, competitors, regulation, suppliers, and customer demand. The suggested framework is used to provide a basis for explaining the changes in the characteristics of individual elements and the interactions among them. The dynamic industry-specific changes will be explained through an evolutionary model. We specify the characteristics of progressive stages and the determinants of the evolution. Changes are reviewed in terms of five criteria; regulations and competitions, value chain, technology, customers demand, and internal operations. The result of this study will be useful in analyzing and predicting industry structure and major participants' strategic behaviors and decision patterns. This study can alse be extended to other industries facing dynamic structural changes.