1 |
Aygul, M., Al-Emrani, M. and Urushadze, S. (2012), "Modelling and fatigue life assessment of orthotropic bridge deck details using FEM", Int. J. Fatigue, 40, 129-142.
DOI
|
2 |
Aygul, M., and Bokesjo, M., Heshmati, M. and Al-Emrani, M. (2013), "A comparative study of different fatigue failure assessments of welded bridge details" Int. J. Fatigue, 49, 62-72.
DOI
|
3 |
Backer, H.D., Outtier, A. and Van Bogaert, P. (2008), "Analytical calculation of internal forces in orthotropic plated bridge decks based on the slope-deflection method", J. Construct. Steel Res., 64(12), 1530-1539.
DOI
|
4 |
Choi, J.H. and Kim, D.H. (2008), "Stress characteristics and fatigue crack behaviour of the longitudinal rib-to-Cross beam joints in an orthotropic steel deck", Adv. Struct. Eng., 11(2), 189-198.
DOI
|
5 |
Dong, P. (2001), "A structural stress definition and numerical implementation for fatigue analysis of welded joints", Int. J. Fatigue, 23(10), 865-876.
DOI
|
6 |
Fayard, J.L., Bignonnet, A. and Dang Van, K. (2007), "Fatigue design criterion for welded structures", Fatigue Fracture Eng. Mater. Struct., 19(6), 723-729.
DOI
|
7 |
Fricke, W. (2002), "Recommended hot-spot analysis procedure for structural details of ships and FPSOs based on Round-Robin FE analyses", Int. J. Offshore Polar Eng., 12(1), 89-96.
|
8 |
Hobbacher, A. (2008), "Recommendations for fatigue design of welded joints and components", IIW Doc. IIW-1823-07.
|
9 |
Kim, M.H., Kim, S.M., Kim, Y.N., Kim, S.G., Lee, K.E. and Kim, G.R. (2009), "A comparative study for the fatigue assessment of a ship structure by use of hot spot stress and structural stress approaches", Ocean Eng., 36(14), 1067-1072.
DOI
ScienceOn
|
10 |
Kolstein, K.H. (2007), "Fatigue classification of welded joints in orthotropic steel bridge decks", Ph.D. Dissertation, Delft University of Technology, The Netherlands.
|
11 |
Michele, S.P., Battista, R.C. and Mergulhao, A.J.R. (2005), "Stress concentration in steel bridge orthotropic decks", J. Construct. Steel Res., 61(8), 1172-1184.
DOI
|
12 |
Miki, C. and Tateishi, K. (1997), "Fatigue strength of cope hole details in steel bridges", Int. J. Fatigue, 19(6), 445-455.
DOI
ScienceOn
|
13 |
Robert, J.C. (2004), "Influence of cutout geometry on stresses at welded rib-to-diaphragm connections in steel orthotropic bridge decks", J. Transport. Res. Board, 1892, 78-87.
DOI
|
14 |
Wolchuk, R. and Ostapenko, A. (1992), "Secondary stresses in closed orthotropic deck ribs at floor beams", J. Struct. Eng., 118(2), 582-595.
DOI
|
15 |
Xiao, Z.G., Yamada, K., Ya, S. and Zhao, X.L. (2008), "Stress analyses and fatigue evaluation of rib-todeck joints in steel orthotropic decks", Int. J. Fatigue, 30(8), 1387-1397.
DOI
|