• 전기학회논문지
• /
• 제60권2호
• /
• pp.301-308
• /
• 2011

This paper deals with the coupled electromagnetic-mechanical field analysis for short-circuit electromagnetic force of the dry-type transformer. The short-circuit currents are calculated using external circuit in accordance with short-circuit test equipment. According to short-circuit current, the generated magnetic leakage flux density in dry-type transformer model is calculated by finite element method. The radially-directed electromagnetic forces in windings are calculated using electromagnetic field analysis and then axially-directed electromagnetic forces in windings are calculated using electromagnetic-mechanical field analysis. The calculated axially-directed electromagnetic forces in high voltage winding are compared to those of measured ones and showed good agreement with experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.2090-2091
• /
• 2007

We investigated the characteristics of transformer type SFCL with neutral line. The transformer type SFCL having neutral line has achieved the simultaneous quench because the secondary winding has acted as parallel reactor. The fault current of SFCL was limited according to ratio of turn number between primary and secondary windings. Therefore, the power burden of superconducting element can be reduced by reduction of ratio of turn number between primary and secondary windings. As a result, we could expect reduction of it's volume in the transformer type SFCL.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1883-1890
• /
• 2017

Transformers are one of the most precious elements of the electric power system. Stability and reliability of the electric power network mainly depend on the working of the transformer. Leakage reactance of the transformer is one of the important factors and accurate calculation of the leakage reactance is necessary for the transformer designers and electric distributors. Leakage reactance of the transformer depends on the geometry of the transformer. There are many different methods for the calculations of the leakage reactance however mostly are usable when the axial heights of the high voltage and low voltage windings are equal. When the axial heights of high voltage and low voltage windings are asymmetric most of the analytical methods are not reliable. In this study, a new analytical method is introduced for the calculation of the leakage reactance. Fourteen different transformers are investigated in this study and four of them are presented in this paper. The results of the new analytical method are compared with the experimental results. Other analytical and numerical methods are also compared with this new method. Results show that this method is more reliable and accurate as compared to the other analytical methods. The maximum relative error between short-circuit test and proposed method for these fourteen transformers was less than 2.8%.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.614-619
• /
• 2023

The fault current limiting characteristics of three-phase transformer type superconducting fault current limiter (SFCL), which consisted of three-phase primary and secondary windings wound on E-I iron core, one high-TC superconducting (HTSC) element connected with the secondary winding of one phase and another HTSC element connected in parallel with other two secondary windings of two phases, were analyzed. Unlike other three-phase transformer type SFCLs with three HTSC elements, three-phase transformer type SFCL using double quench has the merit to perform fault current limiting operation for three-phase ground faults with two HTSC elements. To verify its proper three-phase ground fault current limiting operation, three-phase ground faults such as single-line ground, double-line ground and triple-line ground faults were generated in three-phase simulated power system installed with three-phase transformer type SFCL using double quench. From analysis of its fault current limiting characteristics based on tested results, three-phase transformer type SFCL using double quench was shown to be effectively operated for all three-phase ground faults.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.146-152
• /
• 2016

본 논문에서는 고정밀 각도 센싱을 요구하는 응용분야에 이용되는 권선형 레졸버의 변압부와 레졸버 파트의 유한요소법 (Finite Element Method, FEM)을 이용한 연동해석을 통해 권선형 레졸버 시스템의 성능을 도출하는 과정을 연구하였다. 외부 인가 전원을 증폭시키는 회전형 변압기부와 증폭된 변압기 출력을 이용하는 레졸버의 회전자 입력부의 연동해석을 통하여 전자기적인 정밀도를 향상시킬 수 있는 권선형 레졸버의 연동해석 모델을 제시하고 출력 신호의 특성을 분석하였다. 회전형 변압기에서 승압된 전압이 레졸버 회전자 권선에 인가될 때 회전자 권선의 임피던스를 고려하여 레졸버 입력 전류를 계산하여야 한다. 따라서 레졸버 회전자 권선부 인터페이스 부분은 회로 모델로 구성하여 변압기의 유한요소 모델, 인터페이스 회로 모델, 레졸버 유한요소 모델을 한 번에 연성해석을 수행하였다. 고정밀 각도 도출을 위해 레졸버 고정자 권선은 32x와 1x의 혼합 권선이 설치되어 있으며 서로간의 자기적인 간섭은 없다. 본 논문에서는 슬롯에 적절한 분포적인 권선법이 제시되어 정현적인 SIN, COS 파형과 이들간의 위상각 $90^{\circ}$를 만족시킬 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.194-196
• /
• 2000

This paper presents a new digital relaying algorithm for protection of a two winding power transformer. The proposed algorithm calculates mutual flux linkages of primary and secondary windings from the currents and voltages of primary and secondary windings. The mutual flux linkage ratio of primary and secondary windings is equal to the turn ratio in case of the steady state and magnetic inrush. On the other hand, the ratio is different from the turn ratio in case of internal winding faults. The algorithm does not require B-H curve. The results of various tests are satisfactory.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권4호
• /
• pp.51-54
• /
• 2004

A 1 MV A single phase high temperature superconducting (HTS) transformer was manufactured. In order to reduce AC loss generated in the HTS winding, winding was concentrically arranged. Operation temperature is set at 65K to increase the critical current and reduce the amount of HTS tape usage and the volume. The cryogenic system which consists of main cryostat with the windings and secondary cryostat with 2 GM coolers and cryopump on top and heat exchanger inside is also designed and the cooling performance is simulated with Fluent. Temperature distribution of the windings is investigated whether the windings are kept under designed operation temperature.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.396-402
• /
• 2008

본 논문에서는 영전압 스위칭 풀브릿지 컨버터에 적용할 수 있는 새로운 방식의 복합 변압기(Integrated magnetics) 구조를 제안하고 시험용 컨버터에 적용하여 실험 결과를 보고한 것이다. 제안된 복합변압기의 권선 방법은 두 개의 1차측 권선을 병렬로 하고 2차측 권선은 중앙에 탭이 있는 배전압 방식으로 구성이 된다. 복합변압기의 구조는 기본적으로 EE, EI 코어를 이용하며 코어 양쪽 다리에 변압기의 1, 2차 권선이 각각 위치하고, 중앙의 다리에는 출력 필터용 인덕터 권선을 구성한다 제안된 복합변압기의 성능을 평가하기 위해서 100kHz의 스위칭 주파수, 12V 출력전압과 최대출력 720W급의 컨버터를 제작하였으며 복합변압기는 전 범위에서 동작이 안정되었으며 컨버터는 최대 92%의 전력변환효율을 나타내었다.

• 전력전자학회논문지
• /
• 제13권3호
• /
• pp.237-245
• /
• 2008

최근 중대용량의 교류전동기 구동에 다단 H-브릿지 인버터의 적용이 늘어나고 있다. 이 인버터의 주된 장점 중의 하나는 입력전류에 고조파성분이 적다는 것으로 이는 2차측이 다중의 위상이동 권선으로 이루어진 변압기를 사용함으로써 이루어진다. 본 논문은 다단 H-브릿지 인버터에 적용되는 위상이동 변압기의 권선 설계의 기본 방안과 입력전류 고조파의 이론적인 해석을 제시하고 있다. 위상이동 변압기를 다룬 I부에 이어 II부에서는 입력 선전류의 고조파 특성을 해석함으로써 고조파 제거를 위한 등간격 위상차 설정방식의 이론적 근거를 규명하였다.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.761-766
• /
• 2008

This paper describes a compensation algorithm for a measurement voltage transformer (VT) based on the hysteresis characteristics of the core. The error of the VT is caused by the voltages across the primary and secondary windings. The latter depends on the secondary current whilst the former depends on the primary current, i.e. the sum of the exciting current and the secondary current. The proposed algorithm calculates the voltages across the primary and secondary windings and add them to the measured secondary voltage for compensation. To do this, the primary and secondary currents should be estimated. The secondary current is obtained directly from the secondary voltage and used to calculate the voltage across the secondary winding. For the primary current, in this paper, the exciting current is decomposed into the two currents, i.e. the core-loss current and the magnetizing current. The core-loss current is obtained by dividing the primary induced voltage by the core-loss resistance. The magnetizing current is obtained by inserting the flux into the flux-magnetizing current curve. The calculated voltages across the primary and secondary windings are added to the measured secondary current for compensation. The proposed compensation algorithm improves the error of the VT significantly.