• Coupled systems mechanics
• /
• v.8 no.1
• /
• pp.55-70
• /
• 2019

This investigation is focused on the variations in transversely isotropic thick circular plate due to time harmonic thermomechanical sources. The homogeneous thick circular plate in presence and absence of energy dissipation and two temperatures has been considered. Hankel transform is used for solving field equations. The analytical expressions of conductive temperature, displacement components, and stress components are computed in the transformed domain. The effects of frequency at different values are represented graphically. Some specific cases are also figured out from the current research.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.226.2-226.2
• /
• 2003

The FimH subunit of type 1-fimbriated Escherichia coli has been determined as a major cause of urinary tract infection. To produce a possible vaccine antigen against urinary tract infection, the fimH gene was genetically linked to the Itxa2b gene, which was then cloned into the pMAL -p2E expression vector. The chimaeric construction of pMALfimH/Itxa2b was transformed into Escherichia coli TB1 and its N-terminal amino acid sequence was analyzed. (omitted)

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.290.2-290.2
• /
• 2003

Skin Moisture is an important factor in skin health. Measurement of moisture content can provide diagnostic information on the condition of skin. In this study, a photo diode array type near infrared spectroscopy was used to determine skin moisture. Diffuse reflectance spectra were collected and transformed to absorbance using 1-nm stepsize over the wavelength range of 1100 nm to 2200 nm. (omitted)

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.309.2-309.2
• /
• 2002

The FimH subunit of type l-fimbriated Escherichia coli has been determined as a major cause of urinary tract infection. To produce a possible vaccine antigen against urinary tract infection, the fimH gene was genetically coupled to the ctxa2b gene, which was then cloned into pMAL -p2E expression vector. The chimaeric construction of pMALfimH/ctxa2b was transformed into Escherichia coli TB1 and its N-terminal amino acid sequence was analyzed. (omitted)

• Journal of the Chungcheong Mathematical Society
• /
• v.33 no.4
• /
• pp.505-516
• /
• 2020

This study shows that image deblurring problems can be transformed into the multi-parameter Tikhonov type with multiple right hand sides. Also, this paper proposes the extension of the global generalized cross validation to obtain an appropriate choice of the regularization parameters for this problem. The experimental results of using the preconditioned Gl-CGLS algorithm were analyzed.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.25-43
• /
• 2003

This study is to classify the types of Jikryung and to look into formative . periodic Characteristics. Results of analyzing can be described as follows. 1. Jikryung in the Chosun Era was classified according to whether it had a side hem. Jikryung which had side hem was reclassified according to the position of the side hem into inside, inside and outside and outside fold types and backward leaning type. Jikryung with no side hem was reclassified into types of closed and opened sides. 2. Concerning formative Characteristics, the type of inside fold was coexisted with the types of short front and long rear, the same front and rear, and narrow sleeves, bean chaff typed sleeves. Inside and outside fold type was used the type of short front and long rear, narrow sleeves. Outside fold type was used the type of same front and rear, bean chaff typed sleeves. Backward leaning type was used the same front and rear, wide sleeves. The types of closed and opened sides transformed from double Sup to single Sup and from narrow sleeves to bean chaff in its form and wide sleeves. 3. Concerning periodic Characteristics, the 1st period of Jikryung with side hem showed up the type of inside and outside fold, the 2nd period did the type of outside fold, The 3rd period did the type of backward leaning. Regarding Jikryung with no side hem, its 1st and 3rd periods saw the type of closed side, while its 2nd period coexisted with the types of closed and opened sides.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.33-41
• /
• 1987

The cycle of the seminiferous epthelia in the testis of matured Korean Native Cattle was divided into eight stages. The results were summarized as follows: 1. Type A spermatogonia a, pp.ared twice as many at stage 2 as compared to stage 1, while maximum numbers were the average of 2.8 at stage 2. The intermediate and Type B spermatogonia were found during the stage 3 to 8, stage 6 to 8, respectively. The leptolene primary spermatocytes were not observed during the stage 5 to 7, while the pachytene primary spermatocytes were shown the least in number at stage 4, the secondary supermatocytes could be seen only at stage 4 and the round spermatids were not observed at stage 3, 4. 2. The relative frequencies of the eight stages of the cycle of the seminiferous eptithelia were 24.9, 14.2, 19.0, 6.3, 3.7, 7.9, 10.3 and 13.9%, respectively. 3. Some of the nuclei of Sertoli cells transformed from the "parallel" type to the "perpendicular" type. This evolution took place from stage 1 to 5, when the number of "perpendicular" type nuclei reached a peak and the number was decreased in the rest of the stages.sed in the rest of the stages.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2016

We present the results of a study of a piezoelectric generator that generates electricity by the application of tension to an element. A device is named "EYE-type generator". The EYE-type generator consists of a rectangular ceramic and two elastic body plates that are attached to upper and lower surfaces of a ceramic. If tension is applied to both ends of the elastic body, that tension is transformed to pressure on the ceramic through a change in the form of the elastic body, causing a piezoelectric effect whereby electricity is generated by the ceramic. This generator is relatively durable because a forces are not applied directly to the ceramic. We examined dependencies of the generator's output characteristics on the size of the ceramic and elastic body. A resonance and output characteristics were analyzed by using a finite element method. The generator was fabricated based on results of the analysis, and this was attached to a frequency-controllable vibrator to measure the output characteristics. The measured results were compared with results of the simulation, and the results pointed to the practicality of the design.

• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.73-81
• /
• 2018

Developments in the recent media era has made distortion possible in accordance with changes in the fashion industry as new clothing, technologies, and fusions have become available. Nevertheless, previous studies of specific types of clothing, and their classification for the purpose of research are lacking. Thus, this study examines the development of the Pomme de look and the form of modern variant that appears in fashion clothing and new technologies, and largely examines the clothing case to clean it up. The method employed is leading research that examines the transformation about the concept of the Pomme de look with regard to the fashion about the type of look in the 2000s and onwards. This is organized in accordance with the analytical and physical characteristics, and the esthetic aspects of the results are as follows. The conclusions reached as follows are based on this; first, the physical characteristic manner when based on previous looks, the two-dimensional deformation for making clothes, if there was a simple way, now has more dimensions. Clothes are made in a complex manner and variations emerge. Second, esthetic characteristics strive for beauty while also displaying the modified and more complex manners of clothing that are emerging. Third, the fusion clothing with machines effects to physical and psychological changes through the details about how the sensor is worn. The enemy, the appearance of distortion, and clothing are emerging. This is expected to grow further based on the rapid development of new technologies and the transformation of Pomme de look and design will appear in more varied ways to create a convergence.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.15-22
• /
• 2014

This study is to investigate the phase changes and cold workability after isothermal transformation at $780^{\circ}C$ by using the high temperature gas nitrided (HTGN) STS 430 ferritic stainless steel specimens. The phase diagram of STS 430 steel obtained by calculation showed that the phase appeared at $1100^{\circ}C$ showed as ${\alpha}+{\gamma}{\rightarrow}{\gamma}{\rightarrow}{\gamma}+Cr_2N{\rightarrow}{\gamma}+Cr_2N+CrN$ with increasing nitrogen concentration. Also, the transformation of ${\gamma}{\rightarrow}Cr_2N$ during heat treatment isothermally at $780^{\circ}C$, nitrogen pearlite with lamellar type was fully formed at the nitrogen permated surface layer for 10 hrs. However, this transformation was not completed for 1 hr, resulting nitrogen pearlite plus martensite. The cold rolled specimen of isothermally transformed at $780^{\circ}C$ for 10 hrs after high temperature gas nitriding decreased the layer thickness of nitrogen pearlite inducing the deformation of hard $Cr_2N$ phase. the dissolution rate of $Cr_2N$ phase increased rapidly with increasing cold rolling ratio. Specimens with the microstructure of nitrogen pearlite (isothermally transformed at $780^{\circ}C$ for 10 hrs) were possible to cold rolling without crack formation. However, the mixed structures of nitrogen pearlite + martensite (isothermally transformed at $780^{\circ}C$ for 1 hr) were impossible to cold deformation without cracking.