• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2016

The transformation time among queries in the database management system (DBMS) is responsible for the execution time of users' queries, because a conventional DBMS does not consider the transformation cost when queries are transformed for execution. To reduce the transformation time (cost reduction) during execution, we propose an optimal query transformation method by exploring queries from a cost-based point of view. This cost-based point of view means considering the cost whenever queries are transformed for execution. Toward that end, we explore and compare set off heuristic, linear, and exhaustive cost-based transformations. Further, we describe practical methods of cost-based transformation integration and some query transformation problems. Our results show that, some cost-based transformations significantly improve query execution time. For instance, linear and heuristic transformed queries work 43% and 74% better than exhaustive queries.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.1
• /
• pp.26-36
• /
• 1993

In this study, the ausformed martensite and marformed martensite obtained from austenite with various deformation degrees in Fe-31% Ni-0.2%C alloy were transformed to revesed austenite at $510^{\circ}C$ by cyclic reverse martensite transformation. The effect of prior deformation, the rapid heating rate of reversion and number of cyclic transformation on the microstructure, mechanical properties of reversed austenite were investigated. The reverse austenite transformation is accomplised by the mechanism of shear type transformation. The structure of reversed austenite formed from ausformed martensite and marformed martensite with high deformation degrees is a fine structure of nearly equiaed grain containg a high density of dislocation tangles and was largely affected by the prior deformation applied before reversal transformation. The strength of reversed austenite is more increased with of cyclic transformation especially it is strength at the first cyclic transformation. The yield stress of revesed austenite of ausformed martensite is lower than that of marformed martensite.

• The Mathematical Education
• /
• v.47 no.4
• /
• pp.437-445
• /
• 2008

On the basis of the meaning and general process of geometric proof through transformation concept and understanding the geometric properties of linear transformation, this study showed that the centroid of geometrical figure and certain properties of a parabola and an ellipse in school mathematics can be explained as a conservative properties through linear transformation. From an educational perspective, this is a good example of showing the process of how several existing individual knowledge can be reorganized by a mathematical concept. Considering the fact that mathematical usefulness of linear transformation can be revealed through an invariable and conservation concept, further discussion is necessary on whether the linear transformation map included in the former curriculum have missed its point.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.718-721
• /
• 2005

The high temperature tetragonal phase of zirconia containing $1.40{\~}1.60\;mol\%$ of yttria can be fully retained at room temperature by rapid cooling. The metastable tetragonal phase transforms into the monoclinic phase athermally upon subzero cooling. The transformation exhibited an athermal burst transformation. The effects of yttria content and grain size on the athermal martensitic transformation were studied in detail. The burst temperature linearly decreased with increasing yttria content or decreasing grain size. To consider the distribution of martensite nuclei, the Weibull modulus of the athermal martensitic transformation was evaluated from the distribution of the burst transformation temperature. From the Weibull analysis, the distribution of embryos appears to be more homogeneous than that of the defects responsible for the fracture of similar material.

• The Mathematical Education
• /
• v.40 no.1
• /
• pp.93-102
• /
• 2001

The world we live in is called the age of information. Thus communication and computers are doing the central role in it. When one studies the mathematical problem, the use of tools such as computers, calculators and technology is available for all students, and then students are actively engaged in reasoning, communicating, problem solving, and making connections with mathematics, between mathematics and other disciplines. The use of technology extends to include computer algebra systems, spreadsheets, dynamic geometry software and the Internet and help active learning of students by analyzing data and realizing mathematical models visually. In this paper, we explain concepts of transformation, linear transformation, congruence transformation and homothety, and introduce interesting, meaningful and visual models for teaching of a plane transformation geomeoy which are obtained by using Mathematica. Moreover, this study will show how to visualize linear transformation for student's better understanding in teaching a plane transformation geometry in classroom. New development of these kinds of teaching-learning methods can simulate student's curiosity about mathematics and their interest. Therefore these models will give teachers the active teaching and also give students the successful loaming for obtaining the concept of linear transformation.

• Microbiology and Biotechnology Letters
• /
• v.11 no.3
• /
• pp.163-168
• /
• 1983

The penicillin resistant plasmid DNA was prepared from Streptomyces bobili YS-40, producing penicillinase, by the phenol extraction method and introduced into Bocillus subtilis IAM 12118 by the transformation procedure of Mahler method. The optimal pH and temperature on the transformation was 7.0, 3$0^{\circ}C$ respectively. Above 20 minutes contact of plasmid DNA and recipient cell was shown the high transformation frequency. The transformant of penicillin resistance was proportionally increased as increase of the DNA concentration. The addition of lysine in transformation system increased the transformation frequency about 6-fold and the addition of the chloramphenicol did not affect the transformation frequency.

• Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.79-87
• /
• 2005

The effects of transformation capacity on cometabolic degradation of trichloroethene (TCE) were evaluated using TCE-degrading actinomycetes pure and mixed culture under various culture conditions. The TCE transformation capacity of the actinomycetes enrichment culture in a batch test with phenol addition was 1.0 mg of TCE/mg of volatile suspended solids (VSS). The resting cell TCE transformation capacity of the actinomycetes pure culture cell was 0.75 mg TCE/mg VSS, which increased to 2.0 mg TCE/mg VSS when phenol was added as an external substrate. When the pure culture had an internal substrate in the form of poly-β-hydroxybutyrate (PHB) at 19% of the cell mass, the resting cell TCE transformation capacity increased from 0.47 to 0.6 mg TCE/mg VSS. The presence of PHB increased transformation capacity by 57%, whereas, the addition of phenol caused more than two fold increase in transformation capacity. The actinomycetes culture showed the highest transformation capacity.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.79-85
• /
• 2008

This study aims to derive a practical coordinate transformation method for the existing geographic information database. After analyzing the status and problems of existing 1/1,000 digital base map and GIS application database, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points in a study area. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. We also analyzed the transformation accuracy of underground infrastructure database using the same transformation method as the case of 1/1,000 digital base map. Through this study, it was found that the estimation of transformation coefficients by Molodensky-Badekas using urban control points was suitable for a local government. Furthermore, it was obvious that the accuracy of a 2-dimensional affine transformation was comparable to that of 7 parameter transformation for a local area. Applying the coordinate transformation and bias correction, we could transform GIS application database which was built by an offset surveying based on digital base map within the transformation accuracy of 10 cm. Therefore, it was judged that there will not be a big problem on the transformation of the GIS DB to the world geodetic system.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.183-194
• /
• 2005

This study validated the strategic alignment approach for e-Transformation of the traditional firm through the case analysis of e-Transformation practices performed in Pulmuone Inc., which had been managed and operated in a traditional mode. The e-Transformation approach identified in this study was focused upon the strategic alignment among 4 domains of business strategy, organizational infrastructure and processes, IT strategy, and IT infrastructure and processes, and was performed in the following process: 1) developing IT strategy to perform business strategy, 2) building IT infrastructure and processes to support IT strategy, and then 3) transforming organizational infrastructure and processes based on IT infrastructure and processes. The theoretical implication of this study is to empirically verify the Strategic Alignment Model hypothesized by Henderson and Venkatraman(1994) through the case analysis on e-Transformation of Korean traditional firm, and the practical contribution is to provide a feasible and effective guideline in carrying out e-Transformation of the typical traditional organization.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.89-92
• /
• 2011

Built in 1944, in Busan, Sohawjang has currently remained in severe state of transformation. Sohawjang is a rare case of modern housing complex in Korea and it is a significant historic building as housing history and technique history. This study is to leave the basic data about modern housing by finding the substance of Sohawjang, a unusual case of modern housing complex in Korea, and examples of housing transformation through this study. This study attempts to find the original shape and architectural history about Sohawjang, modern apartment building, and analyze the actual conditions of transformation. For implementing, this study carried out the surveys and interviews with experimental research. As the result of the study, after the independence, various cases of transformation were investigated from floor plan of Japanese middle corridor. This study classified according to types of housing by analyzing outcomes and examined the reason and characteristic of transformation. This study discovered the Sohawjang's housing transformation cases, modern housing complex, that has not been disclosed so far and draw the characteristic of transformation as the Architectural Planning.