• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.545-550
• /
• 2000

Bond between reinforcing bars and the surrounding concrete is supposed to safely transfer load in the design process of reinforced concrete structures. Bar with high relative rib area will be studied further not only static load but also dynamic loading conditions to sustain better performance of bond for reinforced concrete structures under earthquake. To determine the bond behavior of high ribbed bars in beam and column joints under repeated loads, 31 pullout specimens were tested. Bond strength increases as relative rib area increases. Also the effect of relative rib area on bond is larger in cyclic loading than in monotonic loading.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.229-232
• /
• 2001

This paper has analyzed an architecture of DSLAM, system software Architecture, an external interface of DSLAM module, Message transfer of each task. Also in this paper, message and structures between SNMP Agent and each internal board are defined, and from the defined messages and data structures, message processing between boards is designed and implemented

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.267-274
• /
• 2003

The objective of this study is to estimate the frequency characteristics of group walking loads based on the information of measured responses. At first, dynamic properties such as natural frequencies and modes are obtained from input/output relation for building structures by heel drop test. Second, a method to estimate group walking loads by the transfer functions from measured responses to group walking loads is proposed. The method turned out to estimate the group walking loads accurately. Higher modes could be important in estimating the amplitude of group walking loads with the information of single walking load.

• Bulletin of the Korean Mathematical Society
• /
• 제59권2호
• /
• pp.397-405
• /
• 2022

In this article we investigate the transfer of multiplication-like properties to homomorphic images, direct products and amalgamated duplication of a ring along an ideal. Our aim is to provide examples of new classes of commutative rings satisfying the above-mentioned properties.

• Wind and Structures
• /
• 제19권1호
• /
• pp.35-58
• /
• 2014

A numerical simultaneous solution involving a linear elastic model was applied to study the fluid-structure interaction (FSI) of membrane structures under wind actions, i.e., formulating the fluid-structure system with a single equation system and solving it simultaneously. The linear elastic model was applied to managing the data transfer at the fluid and structure interface. The monolithic equation of the FSI system was formulated by means of variational forms of equations for the fluid, structure and linear elastic model, and was solved by the Newton-Raphson method. Computation procedures of the proposed simultaneous solution are presented. It was applied to computation of flow around an elastic cylinder and a typical FSI problem to verify the validity and accuracy of the method. Then fluid-structure interaction analyses of a saddle membrane structure under wind actions for three typical cases were performed with the method. Wind pressure, wind-induced responses, displacement power spectra, aerodynamic damping and added mass of the membrane structure were computed and analyzed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.443-450
• /
• 2001

The Mixed building structures can be divided into three partition, namely, upper wall, lower frame, and transfer system which link two partitions. The purpose of this study is to investigate the nonlinear response characteristics of structures, as the stories of lower frame of mixed building structures changes. The recorded earthquake ground motions of EI Centro 1940 NS is adopted, and the maximum ground accelerations are adjusted to 55ga1, 110ga1, 220ga1, 330ga1. The conclusions of this study are the following. 1) The responses of model that the story of lower frame is one were different from those of other models. 2) The process of ductility hinge occurrence of member was ends of coupling beam of upper wall and ends of beam of lower frame in 55ga1, bases of shear wall on pit floor in 110ga1, and bases of column of 1F in 220ga1.

• Journal of Korean Association for Spatial Structures
• /
• 제20권3호
• /
• pp.91-98
• /
• 2020

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제4권2호
• /
• pp.469-478
• /
• 2000

On the advent of digital era, ECDIS has emerged as a new navigation aid that should result in significant benefits to safe navigation. More than simply a graphics display, ECDIS is a new concept navigation system capable of providing integrated information of geographical and texual data. As an official vector data for ECDIS, ENC consists of spatial and feature data to describe objects in form of points, lines and areas. IHO published International Standards for ENC, such as S-52(Specification for Chart Content and Display Aspects of ECDIS) and S-57(IHO Transfer Standard for Digital Hydrographic Data). This paper deals with the implementation of an ENC representation system which meets S-52 presentation specification and S-57 transfer standards by analyzing S-57 data structures and converting them to an appropriate internal data structures and representing them onto screen adopting S-52 presentation specification.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.398-406
• /
• 2015

In this study, R-123 flow boiling experiments were carried out to investigate the effects of nanoparticle deposition on heater surfaces on flow critical heat flux (CHF) and boiling heat transfer. It is known that CHF enhancement by nanoparticles results from porous structures that are very similar to layers of Chalk River unidentified deposit formed on nuclear fuel rod surfaces during the reactor operation period. Although previous studies have investigated the surface effects through surface modifications, most studies are limited to pool boiling conditions, and therefore, the effects of porous surfaces on flow boiling heat transfer are still unclear. In addition, there have been only few reports on suppression of wetting for decoupled approaches of reasoning. In this study, bare and $Al_2O_3$ nanoparticle-coated surfaces were prepared for the study experiments. The CHF of each surface was measured with different mass fluxes of $1,600kg/m^2s$, $1,800kg/m^2s$, $2,100kg/m^2s$, $2,400kg/m^2s$, and $2,600kg/m^2s$. The nanoparticle-coated tube showed CHF enhancement up to 17% at a mass flux of $2,400kg/m^2s$ compared with the bare tube. The factors for CHF enhancement are related to the enhanced rewetting process derived from capillary action through porous structures built-up by nanoparticles while suppressing relative wettability effects between two sample surfaces as a highly wettable R-123 refrigerant was used as a working fluid.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.146-150
• /
• 1999

On the advent of digital era, ECDIS has emerged as a new navigation aid that should result in significant benefits to safe navigation. More than simply a graphics display, ECDIS is a new concept navigation system capable of providing integrated information of geographical and texual data. As an official vector data for ECDIS, ENC consists of spatial and feature data to describe objects in form of points, lines and areas. IHO published International Standards for ENC, such as S-52(Specification for Chart Content and Display Aspects of ECDIS and S-57(IHO Transfer Standard for Digital Hydrographic Data). This paper deals with the implementation of an EUC representation system which meets S-52 presentation specification and S-57 transfer standards by analyzing S-57 data structures and converting then to an appropriate internal data structures and representing them onto screen adopting S-52 presentation specification.