• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.469-478
• /
• 2000

On the advent of digital era, ECDIS has emerged as a new navigation aid that should result in significant benefits to safe navigation. More than simply a graphics display, ECDIS is a new concept navigation system capable of providing integrated information of geographical and texual data. As an official vector data for ECDIS, ENC consists of spatial and feature data to describe objects in form of points, lines and areas. IHO published International Standards for ENC, such as S-52(Specification for Chart Content and Display Aspects of ECDIS) and S-57(IHO Transfer Standard for Digital Hydrographic Data). This paper deals with the implementation of an ENC representation system which meets S-52 presentation specification and S-57 transfer standards by analyzing S-57 data structures and converting them to an appropriate internal data structures and representing them onto screen adopting S-52 presentation specification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.146-150
• /
• 1999

On the advent of digital era, ECDIS has emerged as a new navigation aid that should result in significant benefits to safe navigation. More than simply a graphics display, ECDIS is a new concept navigation system capable of providing integrated information of geographical and texual data. As an official vector data for ECDIS, ENC consists of spatial and feature data to describe objects in form of points, lines and areas. IHO published International Standards for ENC, such as S-52(Specification for Chart Content and Display Aspects of ECDIS and S-57(IHO Transfer Standard for Digital Hydrographic Data). This paper deals with the implementation of an EUC representation system which meets S-52 presentation specification and S-57 transfer standards by analyzing S-57 data structures and converting then to an appropriate internal data structures and representing them onto screen adopting S-52 presentation specification.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.90-101
• /
• 2008

Korean defense specifications are the technical criteria of military products and major factor of acquisition system. Weapon systems and acquisition technique have been advanced dramatically after 1990's, but Korean defense specification practice standard has stayed after early 1980's except embedded software. The current status of current Korean defense specification practice standard and trend of related design and acquisition techniques like M&S, SBA, and digital manufacturing have been reviewed. This paper suggests that transfer to product, IT oriented specification structure, adaptation of digital product model and reinforcement of engineering management systems to establish a development initiative of Korean defense specification practice standard.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.121-124
• /
• 1989

In this thesis, a decomposed LQG/LTR controller is designed for an undersea vehicle. The modellig error which results from decomposition of the original model is considered to the design specification for maintaining the robust stability. The LQG/LTR controller designed with new specification is simulated.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.37-42
• /
• 2002

In ascidians, a primitive chordate, maternal cytoplasmic factors and inductive interactions are involved in the specification of cell fate in early embryos. The larval structure of ascidians is relatively simple, and the major mesodermal tissues of the tadpole larva are notochord, muscle and mesemchyme. Formation of muscle cells is a cell-autonomous process, and localized maternal macho-1 mRNA specify muscle fate in the posterior marginal zone of the early embryo. In contrast, inductive influence from endoderm precursors plays important roles in the specification of notochord and mesenchyme fates. FGF-Ras-MAPK signaling is involved in the induction of both tissues. The difference in responsiveness of the posterior mesenchyme and anterior notochord precursors is caused by the presence or absence of the posterior-vegetal egg cytoplasm, respectively. In these cases, directed signal may polarizes the responding cells and cause asymmetric cell divisions that operate in both the anterior and posterior regions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.8
• /
• pp.1046-1055
• /
• 2000

The flow and thermal phenomena in flat tubes of radiator are analyzed numerically. To predict the characteristics of heat transfer and pressure drop, the flow analysis program for three-dimensional complex geometry is developed, which adopted an non-staggered grid system and Cartesian velocities as dependent variables of the momentum equations. Using the developed program, the effect of tube specifications on the heat transfer characteristics is investigated for various flat tubes. From this study, the following results are obtained; (1) For the same hydraulic diameter($D_h{\doteq}5.2$mm), the Nusselt numbers of three basic modeis(D, J, and H-model) are 8.71, 8.92, and 10.58, respectively, and the pressure drops of D-, J-, and H-model are predicted as $-3.08{\times}10^{-2}\;Pa,\;-3.12{\times}10^{-2}\;Pa,\;and\; -3.98{\times}10^{-2}$ Pa, (2) In case of the same flat tube specification, the fins must be brazed at upper tube surface because the heat is more vividly transferred. Therefore, it is found that the H- model is the most effective tube as a heat exchanger and these results are used as a fundamental data for the design of tube.

• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.101-107
• /
• 2015

In this paper, we review the domestic reliability standards and its global counterparts IEC/TC 56 international reliability standards. Recently private transfers of reliability certification control tower has established in Korea. Some check points to consider regarding the control tower transfer process to the non-government organization are suggested. Also the IEC/TC 56 and its relevant reliability standards are introduced. Understanding of the IEC/TC56 system will be helpful for the time of non-government organization control tower transfer in the reliability certificate specification

• Journal of the Korean Society for information Management
• /
• v.40 no.4
• /
• pp.167-200
• /
• 2023

For the record management of administrative information datasets in Korea, it is recommended to utilize SIARD as a transfer specification when transferring administrative information datasets. However, there are many cases where the application of SIARD is not suitable due to the record management unit of administrative information datasets, technical limitations of tools that support SIARD, and the realistic situation of public institutions. In this study, we propose a plan to diversify the transfer specifications of administrative information datasets other than SIARD. In the record management of administrative information datasets, the need to reproduce the user interface associated with the dataset has been discussed but not specifically presented. This study confirms that the user interface is a property to be preserved from the perspective of Significant Properties, proposes a method to effectively reproduce the user interface, and provides an example of actual verification.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.398-410
• /
• 2001

The flow and heat transfer characteristics for three-dimensional mixed convection flows in a radiator flat tube with U--shaped grooves are analyzed numerically. The flow and temperature fields are calculated by using the modified SIMPLE algorithm for irregular geometry. One tube specification among the various flat tube exchangers is recommended by considering the heat transfer and pressure drop. The effects of variation of coolant flow conditions and external air conditions on the flow and the thermal characteristics for the selected tube are investigated. the results show that inlet velocity of coolant flow is the very important factor in heat transfer and pressure drop, and top side is better position than the others as fin cleave to tube.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.