• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1253-1261
• /
• 1996

The base station (BS) of CDMA mobile system (CMS) provides mobile call services by controlling call processing functions. The call Processing part of the BS is divided into two components; the base station transceiver subsystem (BTS) and the base station controller (BSC). In this paper, we present the call capacity estimation of the BS about control signals and traffic data of calls by the simulation, and find the bottleneck points and problems which may occur in the BS. In order to estimate the call capacity, first we extract the major parameters for the modeling the BS. Second, we suggest the simulation model for the BS. Third, we estimate the simulation results by finding major objective factors such that the call blocking probability, the utilization ratio and the delay time in the traffic channel elements (TCEs), the BTS interconnection network (BIN)-COMA interconnection network (CIN) trunks, the transcoding channels and the CIN packet router.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.535-541
• /
• 2005

This paper proposes a hybrid optical lines composed of single-mode fiber(SMF) and multi-mode fiber(MMF) for gigabit-capable Passive Optical Network(GPON) using a WDM method with a single light source per each channel, and reports the results of transmission performance the proposed lines. The transmission link uses a direct modulated DFB-LD for high speed downstreams at the optical line terminal(OLT) of central office(CO) and a low cost SFP type transceiver for low-speed upstream in optical network unit(ONU). To split or combine the transmission channels, wavelength MUX/DEMUX are used in the optical line section, and MMFs not longer than 1 km are attached to the SMF lines at the ONU side of the WDM-PON links. We have performed the transmission experiment on the downstream of 2.5 Gbit/s, and 1.25 Gbit/s, and the upstream of 1.25 Gbit/s, and 622 Mbit/s which are recommended by ITU-T G.984.2. The transmission margin and feasibility of the proposed links have been tested to be suitable up to 2.5 Gbit/s transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1252-1258
• /
• 1999

This paper describes a COMS IF transceiver IC for 10-MHz bandwidth wireless local loops. It interfaces between the RF section and the digital MODEM section and performs the IF-to-baseband (Rx) and baseband-to-IF (Tx) frequency conversions. The chip incorporates variable gain amplifiers, phase-locked loops, low pass filters, analog-to-digital and digital-to-analog converters. It has been implemented in a 0.6 -${\mu}{\textrm}{m}$ 2-poly 3-metal CMOS process. The phase-locked loops include voltage-controlled oscillators, dividers, phase detectors, and charge pumps on chip. The only external complonents are the filter and the varactor-tuned LC tank circuit. The chip size is 4 mm $\times$ 4 mm and the total supply current is about 57 mA at 3.3 V.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.178-203
• /
• 2018

In this paper, authors have been evaluated the Frame Error Rate (FER) performance of IEEE 802.11 a/g/p standard 5 GHz frequency band WLAN over Rayleigh and Rician distributed fading channels in presence of Additive White Gaussian Noise (AWGN). Orthogonal Frequency Division Multiplexing (OFDM) based transceiver is implemented by using real-time signal processing frameworks (IEEE 802.11 Blocks) in GNU Radio Companion (GRC) and Ettus USRP N200 is used to process the symbol over the wireless radio channel. The FER is calculated for each sub-carrier conventional modulation schemes used by OFDM such as BPSK, QPSK, 16, 64-QAM with different punctuated coding rates. More precise SNR is computed by modifying the SNR calculation process of YANS and NIST error rate model to estimate more accurate FER. Here, real-time signal constellations, OFDM signal spectrums etc. are also observed to find the effect of multipath propagation of signals through flat and frequency selective fading channels. To reduce the error rate due to the multipath fading effect and Doppler shifting, channel estimation (CE) and equalization techniques such as Least Square (LS) and training based adaptive Least Mean Square (LMS) algorithm are applied in the receiver. The simulation work is practically verified at GRC by turning into a pair of Software Define Radio (SDR) as a simultaneous transceiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.992-998
• /
• 2015

In case of UHF Band Transceiver for Army Aircraft, it shall follow MIL-STD-461F Figure CE101-4 most key design points for this equipment were to minize the current consumption and frequency interference since it will be integrated on aircraft. However, after design, abnomal signal(over 100 dBuA) was occured from 30 Hz to 1 kHz on CE101 test. Occured abnomal signal was measured as 50 Hz signal which was tansceiver $T_{DD}$ signal with the output power of 10 W and 20 ms periods. To meet the specification, current variation needed to be minized. Thus, $I_{dq}$ and $I_d$ of power amplifier were modified almost equally through test result and finally, the equipment was designed and developed with no difference of current consumption and frequency interference from the previous design goal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.638-646
• /
• 2005

In recent wireless communications, direct conversion transceiver or If sampling SDR-based receivers have being designed as an alternative to conventional transceiver topologies. In direct conversion receiver a.chitectu.e, the 1.equency/phase offset between the RF input signal and the local oscillator signal is a major impairment factor even though the conventional AFC/APC compensates the service deterioration due to the offset. To rover the limited tracking range of the conventional method and effectively aid compensation scheme in terms of I/Q channel imbalances, the frequency/phase offset compensation in RF-front end signal stage is proposed in this paper. In RF-front end, the varying phase offset besides the fixed large frequency/phase offset are corrected by using early-late phase compensator. A more simple frequency and phase tacking function in digital signal processing stage of direct conversion receiver is effectively available by an ingenious frequency/phase offset tracking method in RF front-end stage.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.545-550
• /
• 2013

We present a tactile information transceiver using a friction-tunable slider-pad. While previous tactile information devices were focused on either input or output functions, the present device offers lateral position/vertical direction detection and texture expression. In characterizing the tactile input performance, we measured the capacitance change due to the displacement of the slider-pad. The measured difference for a z-axis click was 0.146 nF/$40{\mu}m$ when the x-y axis navigation showed 0.09 nF/$750{\mu}m$ difference. In characterizing the texture expression, we measured the lateral force due to a normal load. We applied a voltage between parallel electrodes to induce electrostatic attraction in DC and AC voltages. We measured the friction under identical fingertip action conditions, and obtained friction in the range of 32-152 mN and lateral vibration in the force range of 128.1 mN at 60 V, 2 Hz. The proposed device can be applied to integrated tactile interface devices for mobile appliances.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2002

In this paper the Dynamic Minislot Reservation Protocol(DMRP) in which the control channel is divided into contention-less and contention minislots in order to reduce re-transmission probability in multicasting is proposed. In the network, earth node has two pairs of transceivers. A transceiver consisting of a fixed transmitter and a fixed receiver is used to control packet registration and the other transceiver is used to transmit data. Two types f transceivers for data transmission are considered : one is FT-TR(Fixed Transmitter-Tunable Receiver) and the other is TT-TR(Tunable Transmitter-Tunable Receiver). In the analysis, FT-TR and TT-TR single-hop passive star networks are compared. As results, we conclude that the DMRP protocol with dynamically divided control channel has improved the system performance such as throughput and system delay regardless of traffic type or network structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.64-74
• /
• 2001

In this paper, a dynamic minislot reservation protocol(DMRP) is proposed and analyzed to improve the performance of the multicast traffic processing in wavelength division multiplexing(WDM) networks. For the proposed protocol analysis, the WDM network architecture with a passive star coupler is used. One pair of transceiver is used for a control channel and the ocher pair of transceiver with one fixed transmitter and one tunable receiver are used for data transmission. In this protocol. the packets which fail to have successful transmission in the present time slot due to data channel and destination collisions, have priority to have successful reservation in the contention-less minislots of the next time slot. Therefore, protocols have improved the throughput and the system delay performance caused by the reduced probabilities of control channel contentions and destination collisions probability. Today, the efficient protocol that can handle the various types of data traffic is needed. As results, the DMRP is useful to improve the performance of throughput and system delay characteristics regardless of the kinds of traffic.