• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.239-242
• /
• 2015

In this paper, we propose a walking assisting system for blind people using Android smartphone and Arduino board. In our proposed system, we use an Android smartphone case and an external ultrasonic sensor to detect the obstacles ahead. In this manner, blind people is able to aware unexpected objects by smartphone speakers or vibration functionality. In addition, the walking assisting system is also designed a notice system which will be triggered by built-in smartphone camera flash when blind people walk in some darkness place. The experimental results from real experiments on blind people have demonstrated the applicability of our walking assisting system, when it not only efficiently helps blind people avoid obstacles ahead but also possible traffic collisions in darkness condition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1884-1903
• /
• 2019

Device-to-Device (D2D) communications can provide proximity based services in the future 5G cellular networks. It allows short range communication in a limited area with the advantages of power saving, high data rate and traffic offloading. However, D2D communications may reuse the licensed channels with cellular communications and potentially result in critical interferences to nearby devices. To control the interference and improve network throughput in overlaid D2D cellular networks, a novel channel assignment approach is proposed in this paper. First, we characterize the performance of devices by using Poisson point process model. Then, we convert the throughput maximization problem into an optimal spectrum allocation problem with signal to interference plus noise ratio constraints and solve it, i.e., assigning appropriate fractions of channels to cellular communications and D2D communications. In order to mitigate the interferences between D2D devices, a cluster-based multi-channel assignment algorithm is proposed. The algorithm first cluster D2D communications into clusters to reduce the problem scale. After that, a multi-channel assignment algorithm is proposed to mitigate critical interferences among nearby devices for each D2D cluster individually. The simulation analysis conforms that the proposed algorithm can greatly increase system throughput.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.12-20
• /
• 2020

The purpose of this study was to analyze the face validity of the revised EPTA (English Proficiency Test for Aviation) to see if the tests actually contribute to the enhancement of aviation safety and achieve the purpose of the assessment. In order to reach the above objectives, 103 pilot test takers were surveyed, and nine in-depth interviewees were selected and interviewed. In addition, detailed research results were derived by dividing the participants into the pilot's flight experience (31 captain pilots, 42 first officer pilots, and 30 general commercial pilots). As a result, pilot participants were generally aware that EPTA was more reasonable because the revised EPTA properly implemented the aviation situation and gave participants motivation to learn aviation English. It was also seen that first officer pilots had a higher face validity of EPTA than captain and general commercial pilots. The reason was that first officer pilots considered air traffic control job was more important than other pilots did.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1229-1236
• /
• 2022

In this paper, we studied accident-aware smart streetlights to prevent secondary accidents when driving on highways. It used Arduino and sensors to inform drivers of weather conditions, incorporated functions such as LED brightness control according to sunlight and night driving vehicles, and used Raspberry Pi camera OpenCV to learn various traffic accidents, natural disasters, and wildlife.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.98-111
• /
• 2018

Truck platooning, which is a cluster of trucks in support of vehicle-to-vehicle communication and automated longitudinal vehicle control, is a promising method to both operational efficiency and prevent traffic crashes. Although a variety of studies have been conducted to identify the effects of vehicle platooning on traffic stream, we are not aware of any study attempting to identify promising road segments for vehicle platooning. This study aims to develop a methodology for determining the priority of freeway segments that would potentially lead to maximize the effectiveness of truck platooning. Evaluation measures derived in this study includes truck crash rates, the percentage of truck traffic, segment length, and the number of entry and exit points. Weighting values obtained from an analytical hierarchical process (AHP) method were applied to compute the proposed priority score to determine better freeway segment for truck platooning. Results suggested that a 46.9km freeway segment, from Sacheon IC to Sanin JC, was the most promising segment for maximizing the effectiveness of truck platooning. It is expected that the outcome of this study would be effectively used as a fundamental to establish operational strategies for truck platooning.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.4
• /
• pp.165-178
• /
• 2020

Objectives This survey study is designed to check the awareness and satisfaction of Korean herbal medicine in patients suffering from acute traffic accidents. Methods From May 1 to 20, 2020, patients who visited the hospital within 7 days after the accident and received prescription of Korean herbal medicine for the first-time symptoms were selected. Survey was conducted 10 days after the first visit to confirm the perception of Korean herbal medicine and expected to be used as a prior study to improve the quality of Korean medicine led by Korean herbal medicine. Results Most patients answered that they were aware of the prescribed Korean herbal medicine's dosage and treatment effects. 65% of the patients said they would like to receive other forms of prescription if possible. Most patients answered that portability is convenient and tastes better than normal. 48% of the respondents said that it was the first to time to take Korean herbal medicine, and 68% said that they were willing to take the Korean herbal medicine later. At the time of the first visit, the health condition assessed using EuroQol visual analogue scale (EQ-VAS) was 46.84, but 10 days after the treatment began, it increased significantly to 61.93. Conclusions The improvement of symptoms and high satisfaction with Korean medicine medical services contributed to the patient's willingness to visit the Korean medicine hospital again and to respond that they were willing to take further medication. EQ-VAS elevation suggests that overall patients' subjective health conditions have improved since treatment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.374-385
• /
• 2010

Wireless mesh networks can be deployed for various networks from home networking to last-mile broadband Internet access. Wireless mesh networks are composed of mesh routers and mesh clients. In these networks, static nodes form a multi-hop backbone of a large wireless access network that provides connectivity to end-users' mobile terminals. The network nodes cooperate with each other to relay data traffic to its destinations. In order to increase connectivity and better performance, researchers are getting interested in multi-channel and multi-interface wireless mesh networks. In these networks, non-overlapping multiple frequency channels are used simultaneously to increase the aggregate bandwidth available to end-users. Recently, researches have focused on finding suitable channel assignments for wireless network interfaces, equiped in a mesh node, together with efficient routing to improve overall system throughput in wireless mesh networks. This goal can be achieved by minimize channel interference. Less interference among using channels in a network guarantees more aggregated channel capacity and better connectivity of the networks. In this thesis, we propose interference aware channel assignment and routing algorithms for multi-channel multi-hop wireless mesh networks. We propose Channel Assignment and Routing algorithms using Traffic Profiles(CARTP) and Routing algorithms allowing detour routing(CARTP+2). Finally, we evaluate the performance of proposed algorithms in comparison to results from previous methods using ns-2 simulations. The simulation results show that our proposed algorithms can enhance the overall network performance in wireless mesh networks.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.