• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.427-436
• /
• 2015

This study analyzes the factors effecting on pedestrian crossing behavior in the unsignalized intersection. Pedestrian crossing behavior is the results of mental stress defined as a combination of environment perception, avoiding accidents, halting collision, and instant crossing decision. It is necessary to make walkable intersection in cities through relieving this stress influenced by personality, traffic condition, and roadway environment. The purpose of study is empirically to examine the crossing behavior such as crossing satisfaction, crossing trial frequency and waiting time based on various factors effecting on crossing intersection by video and questionnaire survey. The $x^2$-test is applied to analyze the characteristics of crossing trial frequency according to each factor. Also, the hazard rate model is established to find the factors effecting on waiting time for crossing. Finally, the direct and indirect effects on the pedestrian crossing satisfaction are presented as the results of LISREL.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.257-269
• /
• 2013

Prevention plans for landslide and slope disasters should be appropriate for a country's budget when considering a systematic investment plan. The systematic management of slopes adjacent to national highways should incorporate reasonable investment risk and the expected degree of damage should be calculated by considering the investment priorities. In terms of priority of investment, the major factors used to determine the degree of hazard are gradient, soil characteristics, RMR (Rock Mass Rating), stability interpretation, type of discontinuities, and history of collapse, among others. The likely consequences of slope failure can be determined by considering traffic volume, the number of lanes, and average vehicle risk. We performed such calculations regarding the priority of investment and performed a regression analysis for 392 slopes located in Yeongseo region, Gangwon province. The calculation results show that collapsed slopes have a higher priority for investment, as do slopes with a high proportion of dangerous sections and locations in valleys.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.43-49
• /
• 2008

The objective of this research was to test a hypothesis that sprawl increases congestion, and so the estimated evacuation time become longer. For this, sprawl was thought to be poor accessibility so that vehicle miles of travel become longer. This research shows that the daily vehicle miles per lane mile that are thought to be an accessibility index had a strong and statistically significant relationship to the estimated evacuation time, while urban population density has no statistically significant relationship to the evacuation time. The result of this research recommends that we should consider sustainable land use patterns that decrease traffic demand by providing good accessibility.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.59-67
• /
• 2007

For the time being, HMA test specimen were prepared by Marshall Compaction Method for hot mix asphalt design and evaluated the mechanical properties of HMA at the specified air voids. Gyratory Compaction can simulate the field compaction process and measure the degree of compaction just after field compaction in laboratory. Superpave mix design with Gyratory compactor has been used for characterization of performance. The curve of gyratory compaction can be used to evaluate the permanent deformation potential of hot mix asphalt. In this paper, couple of indices for hot mix asphalt have been showed for hot mix asphalt in Korea. The major properties from gyratory compaction curve are compaction energy index and traffic compaction index. The specific guide line for the potential of hot mix asphalt has been proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.417-428
• /
• 2021

Since future maintenance cost estimation of infrastructure involves uncertainty, it is important to make use of a failure prediction model. However, it is difficult for local governments to develop accurate failure prediction models applicable to infrastructure due to a lack of budget and expertise. Therefore, this study estimated the life expectancy of asphalt road pavement of national highways using the Bayesian Markov Mixture Hazard model. In addition, in order to accurately estimate life expectancy, environmental variables such as traffic volume, ESAL (Equivalent Single Axle Loads), SNP (Structural Number of Pavement), meteorological conditions, and de-icing material usage were applied to retain reliability of the estimation results. As a result, life expectancy was estimated from at least 13.09 to 19.61 years by region. By using this approach, it is expected that it will be possible to estimate future maintenance cost considering local failure characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.291-303
• /
• 2012

In order to lead safe driving, it is better to provide dynamic and detailed information on how the driver using the relevant road should behave as concerning movements of individual car rather than providing monotone and static information of reducing of speed to unspecified drivers. Assuming road and communication of highway where real-time collection and transfer of information on vehicles and road traffic status is possible, the purpose of this study was to provide real-time safe distance by considering road traffic condition such as road condition and driving condition, travel speed and distance between preceding/following vehicles. We intended to provide basic information about dangerous situation by defining different values of condition based column ($C_{condition}$) in accordance with the road surface condition, based on which Real-time Safety Distance Index(RSDI) is to be calculated comprehensively reflecting speed of preceding and following vehicles, distance between vehicles, vertical alignment and road surface condition on the scope of expression column ($C_n$). We intended to enable the driver to secure safety by providing the calculated Real-time Safety Distance Index (RSDI) so that the driver can intuitively sense and sufficiently cope with a dangerous situation where collision of vehicles may occur. The calculated RSDI value is comprised of 30 unit columns and will be provided to the driver being divided into risk evaluation grades of 3 predetermined steps, 'warning', 'dangerous' and 'normal'.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.793-799
• /
• 2009

Using transportations like railway, aviations and roads have been increasing continuously. Traffic accidents have been increasing as well. To prevent or lessen these accidents become a big issue to solve. Therefore, more enforced safety levels are being required to meet. In railway field, continuous efforts of railway safety are being executed to prevent traffic accidents. In present, railway accidents have been decreasing since subway accident happened in Daegu Subway in 2003. However, safety levels in railway field have not yet achieved as much as in advanced countries. Basic concept for enforced safety level in railway system is to prevent or minimize accidents by managing systems like related facilities, management method, organization, education. This is the same concept to minimize error rate in six sigma theory. In this paper, we are to apply six sigma techniques used in manufacturing industry to railway safety and go through ways to make more efficient railway safety system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.255-260
• /
• 2017

In Korea, traffic accidents between pedestrians and vehicles in 2015 account for 38.8% of all accidents. This study proposes a system design that can measure the risk of conflict between a vehicle and a pedestrian. Firstly the systemdetect and estimate the position, speed, and directional data of the vehicle and the pedestrian. And then it estimate the conflict point between a vehicle and a pedestrian. The risk of conflict is quantified by estimating the pedestrian safety margin (PSM), which is the time difference between the arrival of the pedestrian at the crossing point to the point of conflict and the vehicle approaching the point. In this system each data is acquired through an external monitoring based evaluation module and an individual wearing module. In the future, such a system can be used for decision making such as the design of road hazard improvement facilities and the designation of the elderly protection area.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.27-34
• /
• 2016

For the prevention of marine casualties, international bodies have mainly focused on strengthening ship's stability and design, maritime education and training, and improving maritime traffic environment. Statistics analysis on marine casualties showed that most of casualties occurred in coastal waters, especially by human elements. In order to review the conformity of existing prevention measures with the result of the statistics analysis, the IMO's SHELL model was applied to the established measures. As a result, ergonomic approaches were needed for the prevention of human errors in coastal waters, so that the priority should be given to the interface between ship's operator and navigational environment. For this study, Rasmussen's SRK pyramid, which showed decision making mechanism of human, and the US Coast Guard's investigation manual on marine casualties concerning the collapse of safe maritime transportation system were reviewed, and the merits and demerits within the risk assessment tools such as IWRAP, PAWSA, ES model, PARK model, and NURI model were also studied. Although the effectiveness of the existing risk assessment models was proved in ports and approaching channels, it is concluded that the need of new models for converting Korean seafarers' qualitative risk to quantitative risk was proposed so as to print hazard maps which make seafarers instinctively recognize comparative hazard levels of coastal waters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.