• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.45-54
• /
• 2016

Double deck tunnels are considered to have a large demand in a near future for solving traffic congestion problems and overcoming the limitations in constructing new tunnels. This study presents a numerical investigation using finite element (FE) analysis on the behaviors of the tunnels and the stability of pillars in a divergence section where single tunnel is diverged from a main line double deck tunnel. The effects of the separation distance between the diverged and the main tunnels and the ground condition were examined through the FE analysis by varying the separation distance from 0.1D to 2.0D (D: diameter of main tunnel) and the rock class from class I to V, respectively, and the analysis results were compared with those using empirical methods, strength-stress ratio, and the volume of interference. The FE analysis results indicated that the separation distance has a larger effect on tunnel behaviors, compared with the rock strength, and a single tunnel with a large cross section is more favorable than two separated tunnels for tunnel stability when the separation distance is below 0.7D.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.609-619
• /
• 2020

In accordance with a demand for high quality video streaming, it needs high data rate in limited bandwidth and more traffic congestion occurs. In particular, when providing real time video service, packet loss rate and bit error probability increase significantly. To solve these problems, a raptor code, which is one of FEC(Forward Error Correction) techniques, is pervasively used in the application layers as a method for improving real-time service quality. In this paper, we propose a method of determining image transmission parameters based on various deep neural networks to increase transmission efficiency at a similar level of image quality by using raptor codes. The proposed neural network uses the packet loss rate, video encoding rate and data rate as inputs, and outputs raptor FEC parameters and packet sizes. The results of the proposed method present that the throughput is 1.2% higher than that of the existing multimedia transmission technique by optimizing the transmission efficiency at a PSNR(Peak Signal-to-Noise Ratio) level similar to that of the existing technique.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.269-281
• /
• 2018

Unlike its archetype predecessor such as the Highway Capacity Manual of the United States, the Korean Highway Capacity Manual of 2013 provides the analytical models for estimating the saturation flow rates for the lane-occupying work-zones in the proximity of the signalized intersections. Direct application of the revised saturation flow rates into the classic control delay models, however, appears to produce unreasonable delay amount as traffic demand approaches lane-group capacities and surpasses them, which is common phenomena in the work-zones. Complex interaction among vehicles, lane-dropping work-zone geometry and signal operations were never accounted in the traditional control delay models, and considerable differences between the delay model outcomes and field observations are repeatedly experienced. This paper proposes the modified approaches to the delay models in the manual, exerted on all three elements of control delay, and particularly focuses on the temporal and spatial boundary expansion in comparing the simulated results to the estimated ones. Extensive microscopic simulation work and calibration effort supports the modified approaches well enough to use them in the work-zone planning and evaluation.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.89-97
• /
• 2013

Purpose - The purpose of this study is to systematically review the background of the Korean distribution promotion policy and distribution adjustment policies along with related regulations and policies. Research design, data, and methodology - Domestic distribution policy and relevant laws were examined through a review of existing research literature. The results of the development process of the domestic distribution policy, promotion policies, and adjustment policies are summarized below. Results - The results are summarized as follows. First, the purpose of the development of the domestic distribution promotion policy was to strengthen the competitiveness of the small and medium business industry through structural advancement of the small and medium industry. By expanding the managerial base for the small and medium industry, a new balance could be created in the national economy. There was a requirement for an early assistance policy for small and medium businesses as a base of these businesses in the distribution industry developed from their original model of catering to a traditional market of retail shops. Since 1996, there was a need for this early assistance policy due to the expansion and rapid growth of large scale stores causing a change in the consumption pattern for distribution markets and the decline of large enterprises. Second, the government supports small and medium business distribution through distribution promotion policies by supporting an organization promoting small business and supporting innovation in the distribution system. Third, in 1961 a business mediation system was established to protect small and medium industries. The Small and Medium Business Administration advises conglomerates to postpone acquisitions, restrain expansion of the business, or to reduce business scale if small businesses undergo an adverse effect such as decreasing demand because large companies are expanding into their areas. Fourth, the Distribution Adjustment Policy managed large-scale store regulation as follows: ① limitation on construction by urban planning ordinance, ② limitation on location based on traffic impact assessments, ③ regulation based on business guidelines by chiefs of autonomous bodies, ④ regulation on mandatory holidays and limitation of business hours. This large-scale store regulation is a policy introduced by authority to increase competitiveness of small and medium business distribution by the government. Conclusions - As discussed in this study, the distribution promotion policy and distribution adjustment policy are government distribution policies focused on the protection of the small and medium distribution businesses. This study is timely, since it was planned when the strengthening of the revisions of the Distribution Industry Development Act, aimed to protect small and medium retailers and merchants, was under discussion. The significance of this study is that it offers insights for the development of new policies in the future and an opportunity to consider the background of the distribution policy by the government.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.544-553
• /
• 2014

Activity-based models analyze individuals' various daily activities that are identified as a decision-making unit for transportation planning. In other words, it is the model that determines the types of activities according to the social, economic and situational characteristics of the groups with the same activity patterns and predicts individuals' activity time, distance, spatial movement and transportation mode. The activity-based model is a method of estimating more efficient and realistic demand in transportation forecasting because traffic is regarded as a complex decision-making process that an individual and other people participate in. In this paper, we grasp the factors affecting choice behavior of activity pattern and analyze choice behavior of activity pattern based on multi-dimensional characteristic of each person. First, we classify activity types of reviewing the trip chain and activity purpose. Next, we identified preferable activity types using complicated characteristics of main agent of activity. We concluded that choice behavior of activity pattern is dependent on complex characteristics of each agent, and further multi-dimensional characteristics of each person are affected over the whole decision process of activity schedule.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.135-149
• /
• 2019

This article analyzed economic effects of changes in spatial accessibility on regional touruism expenditure structure resulting from highway investments on Gangwon province, Korea. The Seemingly Unrelated Regress(SUR) model is applied to analyze the structure of change in tourism expenditure of Gangwon Province, and the competition and complementary relationship of tourist demand were analyzed among 18 counties in Gangwon by Dendrinos-Sonis method. The spatial accessibility has a significant effect on the increase in amount of tourist expenditure, but by 1% increase in the accessibility resulted in a reduction of length of stay -0.18% and travel costs -0.34% by respectively. The most powerful variable for improving the on-site economy is the tourist service establishment, which increases one unit, the amount of tourist expenditure increased by 3.6%. Moreover, the competition and supplemental relationship of tourism demands in Gangwon was decided by the conditions under which traffic flow with passing occurred, such as inland or ocean-typed travel attractions, adjacent or remote regions to the highway. The limitations of this study were not able to use raw data of tourism expenditures before and after the opening the highway due to the restriction of priority data, and further research on the appropriate level of spatial accessibility for the regional economy is needed.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.299-313
• /
• 2002

Recently, the demand for mobile communications and multimedia services has rapidly increased so that conventional cellular system cannot fulfill the requirement of users (capacity and QoS) any more. Therefore, the hierarchical cellular system has been suggested in order to guarantee the QoS and to admit large population of users. IMT-2000 adopts the hierarchical cellular structure, which requires a call control algorithm capable of manipulating and utilizing the complicated structure of hierarchical cellular structure with handiness and efficiency. In this thesis, as an improvement of conventional combined algorithm, a new call control algorithm considering the moving speed of terminal and bandwidth is suggested. This algorithm employs buffers and guard channels to reduce the failure rate. Also, this algorithm considers the moving speed of terminal and bandwidth to elevate the efficiency. Furthermore, calls are handled separately according to the moving speeds of terminal and bandwidths to improve the QoS and reduce the handover rate. As an evaluation of the suggested algorithm, a model hierarchical cellular system is constructed and simulations are conducted with various types of traffic. As the result of the simulations, such indices as block rate, drop rate, channel utilization, and the number of inter layer handovers are examined to demonstrate the excellency fo the suggested algorithm.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.777-784
• /
• 2005

The first flush phenomenon is defined as the initial period of road runoff during which the concentration of pollutants was significantly high. Road runoff contains significant loads of micro-particles, heavy metals and organic constituents. There were two major objectives of this study. The first objective was to characterize the road runoff. The second objective was to measure and evaluate particle sire distribution of the road runoff, Stormwater runoff was monitored on two sites of four lane road areas along with traffic volume. A total six storm events were monitored to characterize the road runoff. The quantity of road runoff and quality constituents, including chemical oxygen demand ($COD_{Cr}$), suspended solids(SS), total Kjeldahl nitrogen (TKN), ortho-phosphorus ($PO_4-P$), total phosphorus(TP), heavy metals and particle size distribution were analyzed. The results indicate that the concentration of SS, $COD_{Cr}$, TKN and TP ranges were $45{\sim}2,396\;mg/L$, $40{\sim}931\;mg/L$, $0.1{\sim}19.6\;mg/L$, and $0.2{\sim}25.1\;mg/L$, respectively. The results of the regression analysis between SS and the others constituents shows that $COD_{Cr}$, TP, Cu, Pb were highly correlated. And the results showed that the mean range of particle size and uniformity coefficient for road runoff were $6.7{\sim}23.4{\mu}$ and $6.4{\sim}10.2$, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.114-128
• /
• 2013

Rapid industrialization and economic growth have led to serious problems including reduced open space, environmental degradation, traffic congestion, and urban sprawl. These problems have been exacerbated by the absence of effective conservation and governance, and have resulted in various social conflicts. In response to these challenges, many scholar and government hope to achieve sustainable development through the establishment and management of environment-friendly planning. For this purpose, we would like to analyze functional change for ecosystem by future land-use/cover changes in South Korea. Toward this goal, we predicted land-use/cover changes from 2010 to 2060 using the future population of Statistics Korea and urban growth probability map created by logistic regression analysis and analyzed ecosystem service value using costanza's coefficient. In the case of scenario 1, ecosystem service value represented 6,783~7,092 million USD. In the case of scenario 2, ecosystem represented 6,775~7,089 million USD, 2.9~7.6 million USD decreased compared by scenario 1. This was the result of area reduction for farmland and wetland which have high environmental value relatively according to urban growth by development point of view. The results of this analysis indicate that environmentally sustainable systems and urban development must be applied to achieve sustainable development and environmental protection. Quantitative analysis of environmental values in accordance with environmental policy can help inform the decisions of policy makers and urban developers. Furthermore, forecasting urban growth based on future demand will provide more precise predictive analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.85-97
• /
• 2009

Continuous increase of traffic demand has caused confirmed congestion, fuel consumption, emission, safety, etc. as serious social problems at the present time. The Smart Highway Project has been conducted by the supervision of Ministry of Land, Transport and Maritime Affaire to solve such problems since 2007. The Smart Highway Project includes LDWS (Lane Departure Warning System), a system to prevent broadside collisions and accidents, as a sub-technology of road-vehicle associating technologies. This system warns drivers when their vehicle deviates from the lane where they are traveling at high-speed on the highway. In this paper, the LDWS was evaluated using CBA to analyze the socio-economic consequences. Estimated benefits include reduction of accidents and convenience of drivers. In addition, the economics according to the distribution rate is various when it comes to Lane Departure Warning Technology, the economics of both cases - positive scenario and negative scenario, which was analyzed. As a result, the Benefit-Cost ratio(B/C) of negative scenario showed 0.97 in 2020 and 1.36 in 2030 while B/C ratio of the positive scenario showed 1.04 in 2020 and 1.59 in 2030, which indicated that the higher distribution rate is, the higher the economics generates. Therefore, it is judged that the introduction of Lane Departure Warning Technology will result in high economics.