• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1094-1099
• /
• 2002

In this paper, a numerical method for vehicle-track interaction analysis is developed to evaluate vertical dynamic force subjected to rail surface. A vehicle is modelled by lumped masses system and track by multi layered continuous beam system. The equation of motion of vehicle and track interaction system is derived by considering compatibility condition at the contact points between wheel and rail. The input vibration source is given by the empirical formula of power spectral density of track irregularity, which is suggested by FRA. Using this method, dynamic impact factors with the train speed are evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.783-792
• /
• 2011

The control of rail surface irregularity is very important for the high speed train service in the high speed rail. In order to manage it, initial, preventative, and maintainable rail grinding have been performed and among them, preventative rail grinding conducts in every each year. This study carried out the field test for dynamic track response according to rail surface irregularity comparing before and after rail grinding. In addition, the change of dynamic track responses according to rail grinding was analyzed and the fatigue life was estimated though Rainflow Counting Method and RMC Equivalence Stress. Therefore, it suggested that rail fatigue life should be increased by rail grinding, because amount of impact occurred on track is decreased by getting rid of rail surface irregularity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3195-3200
• /
• 2011

The vibration resulting from railway operation is transmitted through the track and line structure, ground movements to adjacent buildings. As these vibration is growing, there is occurred exaggerated forces and displacements of the track and line structure and it is causing the differential settlement. It is difficult to clarify the dynamic response characteristics of trackbed because of various environmental conditions. However, track irregularity be affected by ununiformed bearing capacity and its dynamic response, study for dynamic response characteristics is required to investigate the cause of track irregularity and countermeasure. This study was intended to evaluate the numerical analysis which exam the response analysis characteristic of ground vibration by shape of cutting and embankment transition zone. The original method of analysis were have to examine variables such as directions, angles, drain conditions, linear conditions. However, In the analysis there were to consider the effect of moving loads according to directions of cutting and embankment transition zone.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.249-255
• /
• 2010

Ballasted track is under the circumstance of repetition of deterioration and recovery. Track deterioration is presented as track irregularity or settlement, and dynamic force subjected to track is one of major cause of the deterioration. The dynamic force is determined from the dynamic interaction between track and vehicle. Rail-pad stiffness is one of the factor affects track dynamic property. In this study, the relationship between rail-pad stiffness and track settlement was investigated. Dynamic forces according to various rail-pad stiffness was obtained from the dynamic vehicle-track interaction analysis using DARTS-NL. Track settlement was calculated by substitution the dynamic forces into various formulas for track settlement. From the result of analysis, it was known that the track settlement is increased about 6% when the rail-pad stiffness rise about twice. And this result leads that there is only a little relationship between rail-pad stiffness and track settlement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.110-115
• /
• 2002

In this paper, the results of an analysis of the dynamic behavior of the eddy current brake(ECB) system are presented. The measured irregularity of the track in Korean high speed line and the track irregularity given by ERRI(high level) were used for simulation. The wheel-rail profile combination were analyzed with different rail gauges. A model of the bogie with an substitute body for the carbody was implemented in the Multi-body-Simulation Program SIMPACK. The ECB frame was modelled both as flexible body and as rigid body. Four different driving conditions were analyzed. In this study dynamic behavior in general were performed to evaluate the design of eddy current brake system and specially the effect of damper was also studied. A comparison of simulations with and without damper shows that the damper have most effect for lower speed. The simulation results will be verified by comparison with measured data from on line test and also used for improving design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.510-516
• /
• 1998

Dynamic stability of a high speed train is very important. This paper presents a dynamic stability analysis of K-TGV using Vampire Program. The analysis of stability on this paper is performed in condition of track irregularity, curved track and strong gust. The critical speed of K-TGV is 140m1s, and it is stable when runs on 7000R(cant 150mm) curved track and on linear track with the body exerted 101kN lateral impulse force.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2095-2106
• /
• 2010

In this study, to grasp the stability of train and to identify the track irregularity, the algorithm was proposed. As the track deformation occur due to running train, the dynamic characteristics of train show non-linearity. The representative transfer functions of wheel to car response were calculated from the frequency response functions which were estimated from measured triaxial accelerations. The measured acceleration responses were compared with the estimated responses from filtered acceleration outputs. This result could show the non-linearity of train system at the location of track deformed. The proposed algorithm was verified by matching with the site investigation.

• 한국철도학회논문집
• /
• 제15권3호
• /
• pp.251-256
• /
• 2012

고속철도 자갈궤도에서 궤도틀림을 체계적이고 효율적으로 관리하기 위해서는 뜬 침목구간에서 차량이 궤도에 미치는 동하중의 특성을 파악할 필요가 있으며 이를 위해서는 뜬 침목을 고려한 차량과 궤도의 동적 상호작용해석기법의 개발이 필요하다. 본 연구에서는 초기 레일의 처짐이 없는 경우 궤광자중에 의하여 발생한 레일처짐(궤도틀림)과 처진 침목과 자갈도상간의 침목 들뜸량을 계산할 수 있는 해석기법을 개발하였고, 궤도틀림과 침목 들뜸량을 동시에 고려할 수 있는 차량과 궤도의 해석기법을 개발하였다. 본 해석기법의 타당성은 타문헌에서 제시한 해석결과와 비교를 통하여 검증하였다.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.29-38
• /
• 2015

이 연구에서는 열차가 교량 접속부를 통과하면서 발생되는 동적상호작용 문제를 유한요소해석프로그램을 이용하여 검토하였다. 해석대상구간에서의 궤도틀림조건은 부등침하량을 삼각함수를 이용하여 이상화하고, 철도공사 선로 보수기준을 만족하는 최대 궤도틀림 한계치를 해석조건으로 설정하였다. 해석대상이 되는 접속부 구조물의 체결장치 아래 부분은 모두 3차원 입체요소로 모형화하였으며, 해석비용을 줄이기 위하여 1/2 궤도부분만을 모형화하였다. 경계조건은 평면변형률상태에 준하는 것으로 차량-궤도 동적상호작용해석을 수행하였다. 국내 콘크리트궤도용 표준 접속부에서의 궤도틀림에 따른 열차 주행시 동적상호작용해석을 수행하여 윤중감소율과 차체수직진동가속도를 살펴보았으며, 접속부의 시멘트 안정처리골재, 일반골재, 일반토사구간에서의 발생된 최대 Mises응력으로 동적거동을 평가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.535-538
• /
• 1997

Studied in this paper was the lateral displacement of railway vehicle using the multi-body dynamic simulation program (VAMPIRE) and the BASS 501. The lateral displacement of railway vehicle is occurred by thc clearance between wheel flange and rail, the track irregularity, the property of each suspension of vehicle and the cant etc. The results of analysis shown that Vehicle is not interfere with subway platform in any conditions namely the tare and full load condition, the wheel. wear condition and the stationary and running of vehicle.