• 품질경영학회지
• /
• 제22권4호
• /
• pp.79-101
• /
• 1994

In modern manufacturing, a product consists of many components created by different processes. Variations in the individual component dimensions and in the processes may result in unacceptable final assemblies. Thus, engineers have increased pressure to properly set tolerance specifications for individual components and to control manufacturing processes. When a proper variation stack-up analysis is not performed for all of the components in a functional system, all component parts can be within specifications, but the final assembly may not be functional. Thus, in order to improve the performance of the final assembly, a proper variation stack-up analysis is essential for specifying dimensional tolerances and process control. This research provides a detailed case example of the use of variation stack-up analysis using a Monte Carlo simulation method to improve the defect rate of a complex process, which is the commutator brush track undercut process of an armature assembly of a small motor. Variations in individual component dimensions and process mean shifts cause high defect rate, Since some dimensional characteristics have non-normal distributions and the stack-up function is non-linear, the Monte Carlo simulation method is used.

• 대한수학회지
• /
• 제57권2호
• /
• pp.401-414
• /
• 2020

It is computationally expensive to compute principal components from scratch at every update or downdate when new data arrive and existing data are truncated from the data matrix frequently. To overcome this limitations, incremental principal component analysis is considered. Specifically, we present a sliding window based efficient incremental principal component computation from a covariance matrix which comprises of two procedures; simultaneous update and downdate of principal components, followed by the rank-one matrix update. Additionally we track the accurate decomposition error and the adaptive numerical rank. Experiments show that the proposed algorithm enables a faster execution speed and no-meaningful decomposition error differences compared to typical incremental principal component analysis algorithms, thereby maintaining a good approximation for the principal components.

• 한국통신학회논문지
• /
• 제42권5호
• /
• pp.1110-1116
• /
• 2017

동작 특성에 따라 궤도회로 장치는 신호기 장치, 선로전환기 및 기타 안전과 관련된 장치의 직접 또는 간접 제어를 위해 설치되며, 주로 열차의 검지, 지상에서 차상으로 제어정보 전송, 궤도 깨짐 검지 및 귀선 전류 전송에 사용된다. 특히 귀선 전류는 신호시스템, 전력시스템 및 전차선 및 궤도회로장치와 관련이 있다. 신호시스템에서 가장 중요한 구성 요소 중 하나인 귀선 전류는 선로변 유지보수자의 안전 및 전철화에 따른 철도 관련 전기시스템의 보호를 위해 적합하게 처리되어야 한다. 따라서, 과전류 상태로 인한 귀선 전류 불평형과 시스템 유도 장애 및 고장을 방지하기 위해서는 귀선 전류의 정확한 분석이 필요하다. 또한, 귀선전류 고조파에 의해 오동작이 발생하면 열차 운행 중단 등의 문제가 발생될 수 있다. 본 논문에서는 이러한 귀선 전류 측정 및 분석 방법을 제시하고 고속열차 운행에 따른 호남고속철도 노선에서의 귀선전류 고조파 시험 결과를 제시하고 있다.

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.658-667
• /
• 2017

철도는 여객을 수송하기 위한 수단으로, 열차의 주행안정성과 탈선방지 등 절대적인 승객의 안전을 확보하는 것이 중요하다. 철도에서 사용하고 있는 레일은 여객을 안전하게 수송하는데 있어 가장 중요한 역할을 담당하는 궤도의 구성품이며, 안전을 위하여 레일의 피로, 파괴에 대한 신뢰성 확보가 엄격히 요구되고 있다. 본 논문에서는 콘크리트 궤도(STEDEF)의 현장측정을 통해 레일표면요철과 레일휨응력이 선형적인 상관관계가 있음을 확인하였으며, 레일표면요철, 궤도지지강성, 열차속도에 따른 레일의 휨응력예측식을 제시하였고, 실내 피로시험을 통해 S-N선도를 도출하여 레일 피로수명을 산정하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.429-434
• /
• 2002

The Synthetic Aperture Radar (SAR) data are considered to contain the greatest amount of information among various microwave techniques developed for measuring ocean variables from aircraft or satellites. They have the potential of measuring wavelength, wave direction and wave height of the ocean waves. But, it is difficult to retrieve significant ocean wave heights and surface current from conventional SAR data, since the imaging mechanism of ocean waves by a SAR is determined by the three basic modulation processes arise through the tilt modulation, hydrodynamic modulation and velocity bunching which are poorly known functions. Along-Track Interferometric (ATI) SAR systems can directly detect the Doppler shift associated with each pixel of a SAR image and have been used to estimate wave fields and surface currents. However, the Doppler shift is not simply proportional to the component of the mean surface current. It includes also contributions associated with the phase velocity of the Brags waves and orbital motions of all ocean waves that are longer than Brags waves. In this paper, we have developed a new method for extracting the surface current vector using multiple-frequency (L- & C-band) ATI SAR data, and have generated surface wave height information.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1885-1895
• /
• 1997

As track density needs to increase to the order of 10, 000 tpi, the suspension has become a critical component in hard disk drives. One of the main obstacles to attain high track density is the structural resonances of the suspension in lateral direction. We investigate the suspension dynamics through the experimental modal analysis and the finite element method. An LDV (Laser Doppler Vibrometer) is employed to measure the response of the suspension which is excited by a shaker and an inpulse hammer for the free condition and the loaded condition, respectively. After comparing the experimental and numerical results, we study how the initial geometry of the bend region affects the suspension dynamics. It is found that the natural frequency of the sway mode decreases as the bend ratio and the bend angle increase. The shape of torsional mode changes as the mass of a slider increases, resulting in a local decrease in the natural frequency.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2011

Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. In this study, analysis on floating slab system installed rubber mat and stopper is carried for the examination on the safety of floating slab system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.458-461
• /
• 2002

The consumer in the 21$\^$st/ century e-business era is developing a taste fur greater professionalism diversity, internationalism and large-scale integration of his or her demands. With these changes in the consumers preferences in mind, e-businesses need to develop a real time track and trace system to accommodate their logistical and consumer service operations. This research paper discusses the development of a object-oriented logistics tracking database system and a web service tracking component necessary to efficiently store and manage the movements of postal goods and provide real time information on logistics trading.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.208-211
• /
• 1993

This paper presents the parameter design method for the desired time response of hydraulic track motor system of an industrial excavator. The dynamic response depends upon many component parameters such as motor displacement, spring constant and various valve coefficients. Most of them are to be determined to obtain the desired response while some parameters are fixed, or discrete for the off-the-shelf type components. The parameters might be selected through repeated simulations of the system once the system is mathematically represented. This paper, however, presents optimization technique to select two parameters using a parameter optimization technique. The variational approach is applied to the system equations which are represented as state equations and from those system equations derived are the adjoint equations. The gradients for each parameter also are formed for the iterations.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2001년도 추계학술발표논문집
• /
• pp.384-388
• /
• 2001

21세기 e-Biz시대를 맞이함에 따라 고객의 요구 수준도 전문화, 다양화, 국제화, 광역화의 양상을 보이고 있다. 이러한 변화에 부응하여 전자 상거래 회사들은 고객에 대한 서비스 향상과 내부관리 및 고객의 지속적인 확보를 고려할 때, 전자 상거래에 따른 물류정보를 실시간으로 Track & Trace할 수 있는 기술 개발이 물류의 통합관리를 위해서나 고객서비스 향상을 위해 필요하다. 본 논문은 거래 정보 및 물류 이동정보를 효율적으로 관리하고 실시간으로 정보를 제공하기 위해, 물류 Trading 정보를 효율적으로 저장·관리할 수 있는 객체 지향 물류 Tracking 정보 저장 모델 및 Web Service Tracking Component 개발에 대한 연구이다.