• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.921-923
• /
• 2003

This paper introduces Flux-Reversal Machine(FRM) and presents the design of a FRM to reduce the cogging torque. The effect of the design parameters on the characteristic and cogging torque is analyzed by finite Element Method(FEM). The considered design parameters are bifurcated teeth, chamfered magnet poles, chamfered rotor tooth tips and rotor skewing. As a result, we can find the optimum model reduced cogging torque and torque ripple in 6/8 FRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.884-886
• /
• 2004

This paper introduces Flux-Reversal Machine(FRM) and presents the design of a single phase FRM to improve its starting torque. The effects of the design parameters on the characteristic and starting torque are analyzed by Finite Element Method(FEM). The considered design parameters are tapered airgap, stewed airgap, asymmetric PM width and slotted teeth. As a result, we can find the best model in producing starting torque of a single phase 2/3 FRM

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.26-34
• /
• 2011

Waterhammer and slamming phenomena can occur when power is cut off due to reversal flow in pipeline and sudden close of check valve. Therefore analysis of reversal flow time, which means the time of reversal flow in pipeline due to pumping station blackout, is needed to protect facilities from waterhammer economically and efficiently. However systematic study on reversal flow time has not been done yet. So theory of reversal flow time analysis is proposed and verified with experiment using several parameters like pump specific speed, motor pole number, and characteristic curve of pipeline in this study.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.705-713
• /
• 2012

In this paper, a novel 12/14 hybrid pole type bearingless switched reluctance motor (BLSRM) with short flux path and no flux-reversal in the stator is proposed. The proposed BLSRM has separated rotating torque and suspending force poles. Because of independent characteristics between torque and suspending force poles, the torque control can be decoupled from the suspending force control. Due to the short flux path without any reversal flux, compared to the 8/10 hybrid stator pole BLSRM, the output torque is significantly improved and the air-gap is easier to control. Meanwhile, basic design principle for the proposed structure is described. To verify the proposed structure, finite element method (FEM) is employed to get characteristics of the proposed structure and 8/10 hybrid stator pole BLSRM. Based on the analysis, a prototype of the proposed BLSRM is designed and manufactured. Finally, validity of the proposed structure is verified by the experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1105-1110
• /
• 2011

본 논문은 신경회로망 기법을 이용하여 직접벡터제어 방식의 문제점을 개선하고자 하였다. 직접벡터제어 방식은 히스테리시스 밴드 폭의 변화로 인해 유도전동기 속도제어 시 맥동이 큰 단점을 가지고 있다. 이러한 문제점을 학습을 통해 오차를 감소시키는 신경회로망 기법을 사용하여 기존의 직접벡터제어 방식에서 발생하던 속도 맥동을 개선하였다.

• 로봇학회논문지
• /
• 제8권2호
• /
• pp.136-142
• /
• 2013

In nature, many small insects are using jumping as a survival strategy. Among them, fleas jump in a unique method. They use an elastomer, 'Resilin', an extensor muscle and a trigger muscle. By contracting the extensor muscle, the elastic energy, that makes a flea to jump, is stored in the resilin. After storing energy, the trigger muscle begins contracting and pulling the extensor muscle. When the extensor muscle crosses the rotational joint, direction of torque generated from the extensor muscle reverses, 'torque reversal mechanism'. Simultaneously, the elastic energy stored in the resilin releases rapidly and is converted into the kinetic energy. It makes a flea to jump 150 times its body length. In this paper, miniaturized jumping robot using flea-inspired catapult mechanism is presented. This mechanism is based on the 4-bar linkage and the reversal joint and is actuated by Shape Memory Alloy (SMA) coiled springs describing the flea's muscle. The robot prototype is fabricated by SCM process using glass fiber prepregs and a sheet of polyimide film. The prototype is 20mm link length, 34mm width and 2.0g weight and can jump 103cm.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.3-17
• /
• 1999

대응력반전시 모래의 거동을 연구하기 위하여 여러 가지 응력경로에 따른 비틀림전단시험이 수행되었다. 응력경로는 토르크의 작용방향에 따라 시계방향과 반시계방향으로 구분할 수 있으며 대응력반전을 포함하는 응력경로에 대한 소성변형률증분의 방향이 응력상태 및 응력증분의 방향과 비교된다. 이들 시험 결과로부터, St, Venant의 원리를 이용한 등방경화이론은 최초재하와 파괴점 부근에서 소성변형률증분의 방향이 응력의 방향과 일치하는 좋은 결과를 나타내었으나 응력반전에 의한 감하과 재재하 부분에서는 차이가 있는 것으로 나타났다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.50-56
• /
• 2013

In this paper, the 6-switch inverter for the Flux-Reversal Motor (FRM) has been presented and compared to the 4-switch inverter for the FRM, which is more popular in cost effective applications. To analyze the FRM, we adopted the two-dimensional time-stepped voltage source finite element method (FEM) that uses the actual pulse width modulation (PWM) voltage waveforms as the input data. As the FRM characteristic analysis of actual pwm voltage input, the torque ripples and iron losses (eddy current and hysteresis loss) of the FRM can be precisely calculated. With the simulated and experimental results, the performance and limitations of the 4-switch FRM which is the cost effective drive compared to the 6-switch FRM drive are provided in more detail.

• 소음진동
• /
• 제9권5호
• /
• pp.936-942
• /
• 1999

Unstable torsional vibration on the marine ship's propulsion shafting system with diesel engine occurred due to a slippage of multi-friction clutch which was installed between increasing gear and shaft generator. In this paper, the mechanism of this vibration was verified via torsional, whirling, axial and structural vibration measurements of shafting system and noise measurement of gear box. And it was also identified by the theoretical analysis method.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.19-25
• /
• 2010

The flow field measurements were conducted on the planes between impeller blades, and the gap between the impeller and turbine blades under speed ratio of 0.4. The study showed that high velocity regions move from locations near the suction surface of the impeller to the pressure blade, shroud corner as flow progresses from the mid-chord of impeller passage to exit and out into the gap region. Planes 3 through 5 also showed flow reversal occurring in the area near the shell surface and progress far into the impeller passage from the impeller passage exit, near shell surface. This affected the converter efficiency negatively. This study would aid in the construction of higher accuracy CFD models of this complex turbomachinery device.