• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.53-58
• /
• 2013

KSTAR in-vessel cryo-pump has been installed in the vacuum vessel top and bottom side with up-down symmetry for the better plasma density control in the D-shape H-mode. The cryogenic helium lines of the in-vessel cryo-pump are located at the vertical positions from the vacuum vessel torus center 2,000 mm. The inductive electrical potential has been optimized to reduce risk of electrical breakdown during plasma disruption. In-vessel cryo-pump consists of three parts of coaxial circular shape components; cryo-panel, thermal shield and particle shield. The cryo-panel is cooled down to below 4.5 K. The cryo-panel and thermal shields were made by Inconel 625 tube for higher mechanical strength. The thermal shields and their cooling tubes were annealed in air environment to improve the thermal radiation emissivity on the surface. Surface of cryo-panel was electro-polished to minimize the thermal radiation heat load. The in-vessel cryo-pump was pre-assembled on a test bed in 180 degree segment base. The leak test was carried out after the thermal shock between room temperature to $LN_2$ one before installing them into vacuum vessel. Two segments were welded together in the vacuum vessel and final leak test was performed after the thermal shock. Commissioning of the in-vessel cryo-pump was carried out using a temporary liquid helium supply system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.687-699
• /
• 2020

The government-led top-down development approach for weapons system faces the problem of technological obsolescence now that technology has rapidly grown. As a result, the government has gradually expanded the corporate-led bottom-up project implementation method to the defense industry. The key success factor of the bottom-up project implementation is the ability of defense companies to plan their technologies. This paper presented a method of analyzing patent data through data mining technique so that domestic defense companies can utilize it for technology planning activities. The main content is to propose corporate selection techniques corresponding to the defense communication-electronics sectors and conduct principal component analysis and cluster analysis for the International Patent Classification. Through this, the technology was classified into four groups based on the patents of nine companies and the representative enterprises of each group were derived.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.87-91
• /
• 2016

In recent years, lots of damages appear frequently due to cyber terrorism and natural disasters such as typhoon 'Chaba', earthquake at Kyeongju. The damages lead to people's anxiety and public institutions connected directly with them also can't be free from the threat situation. In addition, public institutions must prepare business continuity issues with the highest priority in the event of disasters because they are closest with people's safety. However, preceding researches suggest needs of disaster mitigation activities management system or central office oriented top-down BCP establishing system. In this study, We grasp the current status of public institutions's business continuity plan(BCP) against disaster and we propose an efficient bottom-up method for structuring the BCP of public institutions.

• Journal of The Korean Association For Science Education
• /
• v.29 no.7
• /
• pp.751-758
• /
• 2009

The purpose of this study was to investigate brain activation pattern and functional connectivity network during classification on the biological phenomena. Twenty six right-handed healthy science teachers volunteered to be in the present study. To investigate participants' brain activities during the tasks, 3.0T fMRI system with the block experimental-design was used to measure BOLD signals of their brain. According to the analyzed data, superior, middle and inferior frontal gyrus, superior and inferior parietal lobule, fusiform gyrus, lingual gyrus, and bilateral cerebellum were significantly activated during participants' carrying-out classification. The network model was consisting of six nodes (ROIs) and its fourteen connections. These results suggested the notion that the activation and connections of these regions mean that classification is consist of two sub-network systems (top-down and bottom-up related) and it functioning reciprocally. These results enable the examination of the scientific classification process from the cognitive neuroscience perspective, and may be used as basic materials for developing a teaching-learning program for scientific classification such as brain-based science education curriculum in the science classrooms.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.30-35
• /
• 2011

This study investigates the optimum section properties of newly developed steel-concrete composite beam. For that purpose we developed computer program calculating section properties. The suggested new beam section highly contribute to save inter-story height and reduce construction duration and cost compared with conventional steel works such as H-beam and column + RC slab system. But the section shape have different section modulus with upper and lower fiber because of the unsymmetric cross section. Therefore the parametric study on thickness-ratio of top and bottom flange plate is needed. In this paper the change of neutral axis and section modulus for thickness-ratio of up and down flage plate is analysed and discussed.

• Archives of design research
• /
• v.17 no.2
• /
• pp.23-32
• /
• 2004

This paper's objective is the analysis of eye-movement recording with visual perception process, the inference of heuristic guidelines with human information processing, and the generation of design principles for practical works. For this objective, it was experimented on that the user's eye-movement recording of interactive media with the Eyegaze Interface System, and analyzed the visual perception process of top-down & bottom-up processing, and inferred the design principles from human information process. Our results provide the implications of design through the analysis of the user's eye-movement recording that were changed according to each menu depth of the interactive media. And, it is proposed that the new concept of heuristic guidelines based on each stage of action that is related to human factors.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.147-157
• /
• 2009

Configuration and data management system to support processes for the weapon system should support the concurrent engineering and collaborative activities for various documents, drawings, part informations and structural informations, etc. which are produced through R&D processes for a long time. This thesis attempts to identify major functions in the configuration and data management system to support processes for the weapon system R&D into services based on a service oriented architecture. In order to identify major services in the configuration and data management system to support processes for the weapon system R&D, a configuration and data management system to support processes for the weapon system R&D was proposed with a service oriented architecture with four layers including a service consumer layer, a business service layer, an application service layer and a application layer, and major services were identified for each layer. In order to identify major services in four layers, this thesis adopted a bottom-up approach to identify the necessary business services from a well-defined domain implementation system rather than a top-down identification method in general. This thesis tried to identify the essential services in implementing the configuration and data management system to support processes for the weapon system R&D as a system based on the service oriented architecture using such a bottom-up service identification method while limiting those services to the general PDM system aspects and the business areas of the configuration and data management system to support processes for the weapon system R&D.

• Korean Journal of Organic Agriculture
• /
• v.30 no.2
• /
• pp.129-149
• /
• 2022

In March 2020, the National Assembly revised the Framework Act on Cooperatives, allowing a federation of heterogeneous cooperatives, and in October 2020, the Daegu Gyeongbuk Federation of Local Food Cooperatives was launched as the first federation of heterogeneous cooperatives in the country. The local food movement, which has been promoted upward in the local community as an alternative to the existing global food system, seems to be being activated by the government's food plan policy, but critics say that the government's policy goals are not fully achieved due to the top-down policy promotion and lack of communication. In response, this study first examines the role and significance of the local food federation of heterogeneous cooperatives in solving the problems raised in the process of establishing a food plan. In addition, the current status of the federation was investigated for the successful settlement and development of the Daegu Gyeongbuk Federation of Local Food Cooperatives. A survey of affiliated cooperatives, focus group interviews with managers and experts and related literature surveys were conducted. Based on this, the direction of activities was presented, such as the role of an intermediary in Daegu and Gyeongbuk and the role of an intermediary in the public and private sectors etc. In addition, six joint project tasks were specifically presented, including an integrated information sharing system & a logistics network, a planned production system & a joint processing center, an online sales system & a co-marketing promotion, a joint education system, a management of direct stores & restaurants, a sustainable public-private cooperation system etc.

• Korean Management Science Review
• /
• v.33 no.3
• /
• pp.53-64
• /
• 2016

The government is mapping out R&D innovation measures aimed at improving the qualitative level of the performance of national R&D projects that are supported by grants or public funds. This paper proposes ways of making improvements in technology planning, project assessment, performance management, and results evaluation in order to boost the efficiency of the country's promotion of ICT R&D projects, as well as to upgrade the processes involved with its technological innovation system at each of the commercialization stages of its R&D projects. According to our experts' in-depth survey and interview, it has been found that technology planning is the most important phase in the full cycle-based technological innovation system and that the promotion of a combination of top-down and bottom-up approaches is the most reasonable. This paper also suggests it is necessary to secure a process for exploring technological opportunities as the preparatory phase for technology planning, and that it is desirable to reflect the technology demand map associated with the technology road map. Currently, R&D projects are divided into policy designation, designation contest, and free contest. To minimize the inefficiency associated with indiscriminate competition, this paper proposes the introduction of a general contest system in order to change the project assessment system into one based on the results of the competition in each category(e.g. firms, universities, research institutions, etc.).

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.1-10
• /
• 2011

The evaluation systems on the National Spatial Information Policy(NSIP) has been changed, since the Establishment and Use of the National Geographic Information System Act(NGIS Act, 2000) was abolished and the National Spatial Data Infrastructure Act(NSDI Act, 2009) was enacted. As compared to the NGIS Act, the policy evaluation systems for National Spatial Information are regarded as unified and centralized. However, some argue that the claim of budget and the legal feasibility of the NSIP was weakened. Given the different views on the two laws, this study aims at analyzing the changes in the evaluation system by comparing the NGIS Act and the NSDI Act. A Comparative Analysis framework is employed. The subjects of the comparative analysis are evaluation mechanism, evaluator, evaluation target and range, after-assessment utilization, and agent. In order to improve the effectiveness of the evaluation system, it is recommended that the clarification of evaluation purposes, institutional enhancement for evaluation agency, the development of evaluation indexes, the combination of top-down approach and bottom -up approach, and the increased linkage between budget and evaluation result.