• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.117-122
• /
• 2013

This research was carried out to clarify the germination characteristics with reference to hard seed coat in safflower. Morphologically, seed coat surface has hilum and micropyle which were evident during seed development stage. In the flower of developing seeds, the hilum area is connected with placenta of maternal tissue while the micropyle area is connected with the style of pistil. When the seeds imbibed, the hilum surface began to crack and the embryo protrudes through the hilum. To investigate the route for moisture absorption and gas exchange on the seed coat, the hilum and the micropyle were artificially sealed by paraffin. The seeds whose hilum were sealed could not germinate, which indicates that the exchange of moisture and oxygen takes place through hilum in safflower seeds. The germination was tested at $15^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$ by three substrates with different moisture conditions; top of paper method (hilum submerged in water), between-paper method, and soil seeding. The germination percentages were 31.3% at $15^{\circ}C$, 15.7% at $20^{\circ}C$ and 6.0% at $25^{\circ}C$ in the top of paper method; and 45.5% at $15^{\circ}C$, 30.0% at $20^{\circ}C$ and 14.0% at $25^{\circ}C$ in the between-paper method; and 80.0% at $15^{\circ}C$, 77.0% at $20^{\circ}C$ and 78.0% at $25^{\circ}C$ in the soil seeding, respectively. When the internal structure of hilum was investigated through SEM, it was found out consisting of vascular bundle element. In conclusion, the hilum of safflower seed was closely related with water absorption and gas exchange during initial germination process.

• Progress in Superconductivity
• /
• v.11 no.1
• /
• pp.42-46
• /
• 2009

With an aim of comparison, single grain Y-Ba-Cu-O (YBCO) bulk superconductors were fabricated using a liquid infiltration growth (LIG) process and a conventional melt growth (MTG) process with top seeding. The MTG process uses an $YBa_2Cu_3O_{7-x}$(Y123) powder as a precursor, while the LIG process uses $Y_2BaCuO_5(Y211)/Ba_3Cu_5O_8(Y035)$ pre-forms. The growth of a single Y123 domain on the top seed was successful in the both processes. Different feature between the two processes is the interior microstructure regarding the critical current density ($J_c$). The LIG-processed YBCO sample showed a lower porosity, more uniform distribution of Y211 particles and the enhanced Y211 refinement compared to the conventional MTG process. The $J_c$ improvement in the LIG process is attributed to the dispersion of finer Y211 particles as well as lower porosity within the Y123 superconducting matrix.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.293-297
• /
• 2000

Multiseeding with (100)/(100) grain junctions of top-seeded melt growth (TSMG) processed YBCO superconductors was studied. The effect of the number of seeds and the distance between two seeds on the levitation forces and the trapped magnetic fields of the TSMG-processed YBCO samples was investigated. Multiple seeding shortened the processing time for the fabrication of TSMC-processed YBCO superconductors. The large magnetic field was trapped at the grain junction when two seeds was placed without spacing, while the amount of the magnetic field decreased when the seed distance increased. This is attributed to the increased amount of the residual melt phases around the grain junctions.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.19-23
• /
• 2019

A large grain YBCO bulk superconductor is fabricated by the top-seeded melt growth (TSMG) method. In the TSMG process, the seed crystal is placed on the top surface of a partially melted compact and therefore the seed crystal is frequently tilted during the melt process due to intrinsic unstable nature of Y211 particle +liquid phase mixture. In this work, we report the successful growth of single-domain YBCO bulk superconductors by a bottom-seeded melt growth (BSMG) method. Investigations on the trapped magnetic field and the microstructures of the synthesized specimens show that a bottom-seeded melt growth method has hardly affected on the crystal growth behavior, the microstructure development and the magnetic properties of the large grain YBCO bulk superconductors. The bottom-seeded melt growth method is clearly beneficial for the stable control of seed orientation through the melt process for the fabrication of a large grain YBCO bulk superconductor.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.17-19
• /
• 2002

Melt textured YBCO superconductors were fabricated by the top seeding method using Sml.8($Sm_{1.8}$ $Ba_{2.4}$ $Cu_{3.4}$$O_{7-Y}$) seed. We investigated the twin structures using the optical microscope, SEM and TEM. The twin structures formed during the tetragonal to orthorhombic transition which occurred at $450^{\circ}C$ in sample oxygen annealing. The twin structures were clearly observed by SEM due to the chemical etching effects. The lengths of twin structures were increased as the oxygenation heat treatment time increased from 1hr to 10hr. We investigated twin structure by TEM. The twin spaces were considered to be related to the oxygen contents. The results suggested an oxygen diffusion model for the formation of the twin lengths.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.141-146
• /
• 2003

To improve the percentage of field germination of Zanthoxytum piperitum DC., storage in ground(control) and several chemicals as treatments was investigated. Germination percentage was 30.3 and 22.7% in GA$_3$(100 ppm) and NaCIO(10%), respectively compared with 17.3％ in storage in ground without treatments. Germination percentage reached maximum between 26 and 33 days after seeding and then increased slowly. Top/Root ratio was the highest at storage in ground after the treatment of GA$_3$ 100ppm.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.42-47
• /
• 1992

This study was conducted to determine the effects of the bottom watering method on seedling growth, temperature of seedbed and working hours. The results of compared conventional watering with bottom watering were as follows: 1. The lowest and highest temperature on surface of bottom watering seedbed were higher about 2-3$^{\circ}C$ and 3-5$^{\circ}C$ than those of conventional plot, respectively. 2. At 30 days after seeding, flesh and dry weight of seedling in bottom watering seedbed were heavier about 121% and 62% than those of seedling in conventional plot, respectively, while dry ratio of that was lower about 30.2%. 3. Plant height of transplanting seedling in bottom watering seedbed was higher about 4-5cm than that of seedling in conventional plot. Otherwise, ratio of top to root and length of root were not significant. 4. Working hours of bottom watering for growing seedling were reduced 40.9% and 53.4% in primary and secondary seedbeds as compared with those of conventional plot, respectively.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.5
• /
• pp.110-120
• /
• 2009

The hipped roof on the research building, which was constructed 51.9m above sea level on a hillock by Korea National University of Education in June 1999, is composed of four inclined planes which are 12m in breadth, 8m in length and have a 30 degree gradient. For the roof vegetation, the yellow earth collected from around the building was laid on top. It was designed to supply the soil on the slope with water for a considerable period by making rainfall pool at the edges. In order to prevent the soil on the slope from being swept away, 31 sorts of grass seeds were imported from Germany and sown in the soil. At the present day, 10 years after the seeds began to sprout and inhabit the settled slope, 30 individual plant species were identified in the period between April 2008 and March 2009. Out of 31 species were seeded on the slanted, soiled roof, only 8 were still alive. It was confirmed that the Artemisia Princeps var, Chrysantheum, Prunella Vulgaris and Lespedeza Cuneata have been the major species inhabiting the east, west, south and north inclined planes respectively. The Phragmites Communis was inhabiting the edge of the roof where the water supply was adequate, while the Dianthus Barbatus was primarily inhabiting the south-east side of the roof. As a whole, 26 identifiable plants and 4 unidentified plants were observed on the inclined planes of the hipped roof. In consideration of the plant distribution on the slope, it was confirmed that the selection of seeds may have had an effect on the slope vegetation. As for the yellow earth laid on the roof, it was discovered that about 2~3cm thickness around the ridge was swept away, but the rest of the slope was in relatively good condition. Accordingly, it has been proven that vegetations can be applied to hipped roofs by using ordinary plants without any special structural measures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.387-391
• /
• 2000

Barley straw is a good source of organic matter for next crop growth following barley. This study was conducted to investigate effects of barley straw application methods (application, removal, or incineration) on growth and yield in soybean cultivation following barley. A soybean variety, Eunhakong, was sown on 12 June with drill-seeder attached to tractor after tillage. Barley straw application resulted in increase in organic matter content compared to removal and incineration of barley straw, and soil physical properties such as water content and porosity, were improved by application and incineration of barley straw. Weed occurrence was deterred by 44% in barley straw application and by 31% in barley straw incineration compared with removal of barley straw. Number and dry weight of soybean nodules were move abundant in barley straw application than the other treatments at 4 and R2 stages. Barley straw application had less for dry weight than barley straw removal but greater than incineration of barley straw about 30 days after seeding. However barley straw application caused greater top dry weight 90 days after seeding. Root dry weight was not affected by barley straw application method at all growth stage. There're no significant differences in soybean yield among barley straw application methods.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.261-274
• /
• 2019

This paper aims to develop an appropriate methodology for establishing an investment strategy for 'demonstration of artificial rainfall technology using UAV' and that include establishment of a technology classification, set of indicators for technology evaluation, suggestion of final key technology as a whole study area. It is designed to complement the latest research trend analysis results and expert committee opinions using quantitative analysis. The key indicators for technology evaluation consisted of three major items (activity, technology, marketability) and 10 detailed indicators. The AHP questionnaire was conducted to analyze the importance of indicators. As a result, it was analyzed that the attribute of the technology itself is most important, and the order of closeness to the implementation of the core function (centrality), feasibility (feasibility). Among the 16 technology groups, top investment priority groups were analyzed as ground seeding, artificial rainfall verification, spreading and diffusion of seeding material, artificial rainfall numerical modeling, and UAV sensor technology.