• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.1045-1048
• /
• 2007

We mainly report recent progress in backlight unit (BLU) for liquid crystal display (LCD) using printed carbon nanotubes (CNTs) including top-gate and lateral gate structures. Lighting performances of CNTBLU and longevity of printed CNT emitters are intensively discussed. Selected issues related with field emission display (FED) using the same emitters also are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.522-523
• /
• 2005

Top emission OLED 소자에 사용되는 ITO(Indium-Tin-Oxide)의 저항을 개선하여 보다 낮은 저항을 가지는 전극을 제작하기 위해 AZO(ZnO-Ag-ZnO)를 제작하였다. AZO박막은 기존의 ITO박막이 수십 $\Omega$을 나타내던 것과 비교하여 $8\Omega$으로 매우 낮은 저항을 나타내었다. 투과율은 84%로 기존의 ITO박막과 유사한 성능을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.485-486
• /
• 2006

Top emission OLED 소자에 사용되는 ITO(Indium-Tin-Oxide)의 저항을 개선하여 보다 낮은 저항을 가지는 전극을 제작하기 위해 AZO(ZnO-Ag-ZnO)를 제작하였다. AZO박막은 기존의 ITO박막이 수십 $\Omega$을 나타내던 것과 비교하여 $8{\Omega}$으로 매우 낮은 저항을 나타내었다 투과율은 84%로 기존의 ITO박막과 유사한 성능을 나타내었다.

• 한국대기환경학회지
• /
• 제28권4호
• /
• pp.396-410
• /
• 2012

The purpose of this study is to quantify the contribution of high emitting vehicles to mobile emission inventories. Analyzed emission data include $NO_x$, HC, and CO results, which were measured through the vehicle Inspection and Maintenance (I/M) program in Seoul metropolitan area. The high emitting vehicles were identified as the top 5% worst polluting cars of the fleet. We estimated that 5% of the gasoline passenger car fleet, which is high emitters, generated 25.5% of $NO_x$, 34.5% of HC, and 66.1% of CO emissions of total inventories for gasoline passenger car fleet in year 2010. In the study, we identified that the older vehicles (older than ten years) and high mileage vehicles (more than 120,000 km driven) comprised high emitter fleet with 70.9% and 71.2%, respectively. The emission contribution of high emitters became larger in younger fleet than in the older fleet. This is due to the reduced emission rates in newly manufactured vehicles, which were developed under the more stringent emission regulation limits. This analysis implies that high emitters could be responsible for an even larger fraction of total vehicular emissions as more advanced technology vehicles are being incorporated into the current vehicle fleet. The findings suggested that the high emitting vehicles should be primarily considered for in-use vehicle emission management program, such as I/M, accelerated vehicle retirement, or catalytic converter replacement, in order to enhance the effectiveness of selected program.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.181-185
• /
• 2006

The flexible 2-inch AMOLED with $176{\times}144$ pixels has been demonstrated using top emission OLED driven by organic thin film transistors (OTFTs). For the development of AMOLED display on plastic substrate, we have developed several integration and unit process technologies. Through the optimization of the process based on plastic substrate, OTFT backplane with 2 transistors and 1 capacitor in a pixel has been fabricated and integrated with top emission OLED. The active addressing by OTFT driving circuit has been achieved and green light with 15 $cd/m^2$ at 15V has been observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.981-983
• /
• 2003

Using the conventional standard CMOS logic process, the high voltage MOSFET to drive top emission OLEDs was fabricated for the silicon-based organic electroluminescent display. The drift region of the conventional high voltage MOSFET was implemented by the n-well of the logic process. The measurement result shows a good saturation characteristic up to 50 V without breakdown phenomena.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1183-1189
• /
• 2012

Organic light-emitting diodes (OLEDs) using microcavity effect have attracted great attention because they can reduce the width of emission spectra from organic materials, and enhance brightness from the same material. We demonstrate the simulation results of the radiation properties from top-emitting organic light-emitting diodes (TE-OLEDs) with microcavity structures based on the general electromagnetic theory. Organic materials such as N,N'-di (naphthalene-1-yl)-N,N'-diphenylbenzidine (NPB) as a hole transport layer and tris (8-hydroxyquinoline) ($Alq_3$) as emitting and electron transporting layer are used to form the OLEDs. The organic materials were sandwiched between anode such as Ni or Au and cathode such as Al, Ag, or Al:Ag. The devices were characterized with electroluminescence phenomenon. We confirmed that the simulation results are consistent with experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집
• /
• pp.22-23
• /
• 2008

본 연구에서는 전면 유기 발광소자(TE-OLED)를 제작하여 전기 광학적 특성을 연구하였다. 전면 발광 OLED의 투명 전극으로 사용된 Al과 Ag의 박막 두께에 따른 투과율과 면저항값은 다음과 같이 나타났다. 파장 520nm의 기준으로 Al 금속 박막의 두께가 10nm 이하여야 50% 투과율을 보였고, 반면 Ag는 25nm 이하로 나타났다. 면저항값은 박막두께 20nm 기준으로 Al은 약 $40\Omega/\square$, Ag는 $10\Omega/\square$이하로 나타났다. 전면발광 방식의 시야각에 따른 빛의 세기는 cos $60^{\circ}$ 일 때 0.1로, TE-OLED는 시야각이 증가하였을 때 현저히 감소되는 것을 볼 수 있다. TE-OLED의 시야각의 증가에 따른 EL-peak 또한 약 520nm의 파장대에서 약 500nm으로 변화하였다. 전면 발광 방식의 반폭치(FWHM)는 배면 발광 방식 보다 약 32nm정도 좁게 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.239-244
• /
• 2007

Highly efficient and stable white PIN OLED structures have been developed with a focus on possible AM display applications. Due to the use of the novel air-stable Novaled n-dopant material NDN26, the mass production compatibility of the PIN approach is improved. With both a conventional n-dopant, NDN1, and a novel air-stable n-dopant, NDN26, similar performance in efficiency and lifetime are reached. Based on highly a stable red fluorescent emitter system, the Novaled PIN approach allows for reaching ultra-long lifetimes of 1,000,000 hours at a brightness of $1,000\;cd/m^2$, both for top and for bottom emission layouts. Furthermore, inverted PIN structures for a possible use in a-Si backplane applications for AM displays are shown. With a phosphorescent green emitter system it could be demonstrated that for bottom and inverted as well as non-inverted top emission, a brightness of $1,000\;cd/m^2$ can be reached at below 3 V. In addition to low operating voltages and long lifetimes, PIN OLEDs also enable for device structures with extremely low operating voltage drifts, a feature of increasing importance for future AM display developments.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.550-553
• /
• 2010

The enhancement of quantum efficiency using a surface modified Ag anode in top-emitting organic light emitting diodes (TEOLEDs) is reported. The operation voltage at the current density of $1\;mA/cm^2$ of TEOLEDs decreased from 9.3 V to 4.3 V as the surface of anode coated with $CuO_x$ layer. The work function of these structures were quantitatively determined using synchrotron radiation photoemission spectroscopy. Secondary electron emission spectra revealed that the work function of the Ag/$CuO_x$ structure is higher by 0.6 eV than that of Ag. Thus, the $CuO_x$ structure acts as a role in reducing the hole injection barrier by about 0.6 eV, resulting in a decrease of the turn-on voltage of top-emitting light emitting diodes.