• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.53-58
• /
• 2008

This paper designs sigma-delta D/A Converter with a high resolution and low power consumption. It reorganizes the input data along LJ, RJ, I2S mode and bit mode to the output data of A/D converter. The D/A converter decodes the original analog signal through HBF, Hold and 5th CIFB(Cascaded Integrators with distributed Feedback as well as distributed input coupling) sigma-delta modulation blocks. It uses repeatedly the addition operation in instead of the multiply operation for the chip area and the performance. Also, the half band filters of similar architecture composed the one block and it used the sample-hold block instead of the sinc filter. We supposed simple D/A Converter decreased in area. The filters of the block analyzed using the matlab tool. The top block designed using the top-down method by verilog language. The designed block is fabricated using Samsung 0.35um CMOS standard cell library. The chip area is 1500*1500um.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1114-1116
• /
• 2002

The characteristics of voltage drop and THD for parallel operating 11 PCRs (Phase Controlled Rectifiers) are analysed. The PCRs are used to drive high current (1.6 kA ${\sim}$ 3.7 kADC) electromagnetic coils for electromagnets. All the PCRs operate simultaneously in pulsed mode, and the pulse shot occurs every 150 seconds. During the pulse operation the PCR output current ramps up for 4 seconds, and then keeps flat top state for 2 seconds, and finally ramps down for 4 seconds. For the flat top mode a severe voltage drop and distortion appear in the power system because transformers for the PCRs are designed considering pulsed mode operation. It is expected that the analysis method can be applied to improve the system performance including power factor and design of high power pulsed mode operating power supply systems.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.302-315
• /
• 2020

The issue concerning how to integrate with the needs of sustainable development according to Crime Prevention Through Environmental Design(CPTED) theory still continues in the development process of the third-generation theory at the present stage. In addition, the issue is under worldwide controversy and discussion. What is more noteworthy is that the viewpoints under debate and discussion have an influence on the mutual effect and relationship between the theoretical model and the principles in the theoretical model, and the influence can never be underestimated. After a mastery of the overall context of theoretical development, it is believed in this study that the identity of CPTED theory development can provide a diverse understanding dimension and a communication method between the environment and environmental users. On the basis of identity the development of CPTED theory, the crime prevention design mode of CPTED needs to connect different dimensions of sustainability, with the design goal of livability as the starting point, the Top-down model to adjust the safety of the environment. By no means can the environmental condition be improved by solely relying on the previous physical design method in virtue of Bottom-up model. Therefore, in this study, the identity of CPTED will be set as the core combined with Top-down crime prevention design model to propose a visual proposal for the reconstitution of the theoretical model, rather than supplementing the application of the contents or principles at a certain stage. Hence, it is expected to provide reference and enlightenment for the sustainable development of CPTED theory.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.199-202
• /
• 2014

In recent years the downtown, Top-down method has been applied in a major method to solve the complaints due to noise, vibration, dust and safety issues such as cracking due to settlement when the excavation close to the building. Until it is installed underground permanent foundation, the Pre-founded Column is a pile foundation as well as a column to bear the upper construction load. The Pre-founded Column is constructed by PRD method generally. The EnP(Enlarging Pile) method can be expanded locally boring diameter of the embedment zone as compared to the PRD method existing general. Since the bearing capacity is increased by the boring diameter is expanded, the embedment length is reduced, the construction cost is reduced.

• Journal of KIISE:Software and Applications
• /
• v.37 no.3
• /
• pp.214-221
• /
• 2010

The search-results clustering problem is defined as the automatic and on-line grouping of similar documents in search results returned from a search engine. In this paper, we propose a new search-results clustering algorithm specialized for a paper search service. Our system consists of two algorithmic phases: Category Hierarchy Generation System (CHGS) and Paper Clustering System (PCS). In CHGS, we first build up the category hierarchy, called the Field Thesaurus, for each research field using an existing research category hierarchy (KOSEF's research category hierarchy) and the keyword expansion of the field thesaurus by a word clustering method using the K-means algorithm. Then, in PCS, the proposed algorithm determines the category of each paper using top-down and bottom-up methods. The proposed system can be used in the application areas for retrieval services in a specialized field such as a paper search service.

• Science of Emotion and Sensibility
• /
• v.6 no.1
• /
• pp.55-62
• /
• 2003

This study was an exploratory approach to the cognitive model of textile designers on the stage of motif development in textile design process. Prior to the main research, several previous studies adopting methods of video/audio protocol analysis were reviewed. On the basis of the review, the categories of design action were derived as an analysis frame by application of top-down access method, meanwhile the sub-groups of each category of design action were identified through a bottom-up access method. To summarize the research result, total three categories of textile design action appeared based on the theory of ‘Human processor’ model : ‘motor action’, ‘perceptual action’ and 'cognitive action'. In next, a new coding scheme suitably explaining these three categories of fertile design action was developed. Finally, a cognitive model of textile designer on the stage of motif development, employing the new coding scheme, was suggested in this study.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.37-49
• /
• 2017

This study proposes an analysis methodology for air quality improvement effect of transport and environment policy that are used for mobile pollution sources. The methodology considers the changes of traffic of road transport sources and air pollutant emission, the changes of atmospheric dispersion of air pollutants and the effects on the health of local residents in response to policy implementation. Especially, the changes to traffic flow must be considered in evaluating the effects on atmospheric environment as it has a direct connection to the effects of the policy in this study. We used bottom-up approach (BUA) based on the travel demand model to reflect the changes of travel behavior in detail in response to the policy implementation compared to the top-down approach (TDA) when calculating the changes of emission level of road transport. We showed the applicability of the proposed analysis methodology through a policy scenario analysis, and the analysis method can be effectively applied to the cases in which travelers' behavior changes are expected.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.957-960
• /
• 2008

The purpose of this study is to explore a safe, advanced, and environment-friendly demolition equipments and their operation methods. As an initial achievement, the capacity of the existing equipments have been evaluated through technical discussions and demonstrations with some experts in the related industry. From these evaluations, it was concluded that a haptic based remote control with force feed-back mechanism and sensor fusion functions would be the most appropriate to the demolition equipments. Therefore, a novel haptic device that is adequately designed for the demolition equipments is proposed in this paper. Top-down demolition method is also proposed, which is very effective in the demolition of high-rise buildings.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.205-219
• /
• 2019

As the education and training is such a virtual environment is applied to various fields, its usability is endless. However, there is an underestimation of the depth of perception in the training environment. In order to solve this problem, we tried to solve the problem by applying the top-down correction method. However, it is difficult to classify the result as a learning effect or perception change. In this study, it was confirmed that the proportion of spatial components of urine had a significant effect on the depth perception, and it was confirmed that the size perception were corrected together. In this study, we propose a correction method using spatial component and depth perception to improve the accuracy of depth perception.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.9-46
• /
• 2013

The degree of delegation related to the social security acts is involved in the candidate selection methods and the standing committee system. The social security acts with a small amount of delegation have an affinity with the bottom-up selection methods and the standing committee to guarantee long term in office. In Germany, the bottom-up selection method which guarantees the right of party members to nominate candidates and the standing committee to guarantee long term in office have an affinity with the Social Acts with less delegation. But the social security acts with a large number of delegation have an affinity with the top-down selection methods and the standing committee not to guarantee long term in office. In Korea, the top-down selection method in which the central headquarter of the party dominates the selection process, and the standing committee whose members are to be selected every two years have an affinity with the Social Security Acts with the excessive delegation.