• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.85-90
• /
• 2013

In this paper, 6bit SAR ADC tolerant to ionizing radiation is presented. Radiation tolerance is achieved by using the Dummy Gate Assisted (DGA) MOSFET which was proposed to suppress the leakage current induced by ionizing radiation and its comparing sample is designed with the conventional MOSFET. The designed ADC consists of binary capacitor DAC, dynamic latch comparator, and digital logic and was fabricated using a standard 0.35um CMOS process. Irradiation was performed by Co-60 gamma ray. After the irradiation, ADC designed with the conventional MOSFET did not operate properly. On the contrary, ADC designed with the DGA MOSFET showed a little parametric degradation of which DNL was increased from 0.7LSB to 2.0LSB and INL was increased from 1.8LSB to 3.2LSB. In spite of its parametric degradation, analog to digital conversion in the ADC with DGA MOSFET was found to be possible.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1610-1615
• /
• 2007

This paper presents a characteristics of linear induction motor considering airgap variation for railway transit in order to achieve high performance of the vehicle. The operating principle of a LIM(Linear induction motor) is identical to a rotary induction motor. Space-time variant magnetic fields are generated by the primary part across the airgap and induce the electro-motive force(EMF) in the secondary part, a conducting sheet. This EMF generates the eddy currents, which interact with the airgap flux and so produce the thrust force known as Loren's force. Even though the operating principal is exactly same as a rotary motor, the linear motor has a finite length of the primary or secondary parts and it causes static and dynamic end-effect which is the discontinuous airgap flux phenomenon. This end-effect causes the deterioration of the system performance, especially in high-speed operation. Another problem is that construction tolerance restricts the minimum airgap in order to prevent a collision between the primary part and the secondary reaction plate. More over, as the airgap length is getting smaller, the attraction force between the primary part and secondary parts is getting larger dramatically and the attraction force would be another friction against propulsion. Therefore, it is necessary to figure out the characteristics of linear induction motor considering airgap variation in order to achieve high performance of the vehicle. The dynamic model of LIM taking into account end-effects is derived. Then the modified mechanical load equation considering the effect of the attraction and thrust force according to the airgap variation is analyzed. The simulation results are presented to show the effect of the LIM according to the airgap variation.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2004

The collimator is necessary for the assembly and evaluation of high resolution satellite telescope. Traditionally, the off-axis paraboloid has been used as a collimator. However, it has some disadvantages in that it can suffer from air turbulence when the focal length of a collimator is long, which may result in some error in the measurement. In contrast, since the Cassegrain type collimator folds the beam, it occupies smaller space compared to the off-axis paraboloid for the same focal length. This can reduce the air turbulence, which can improve the measurement accuracy. In this paper, we explain the process of design and manufacturing of a diameter 450 mm Cassegrain type collimator, to evaluate the diameter 300 mm satellite telescope. After assembly of primary and secondary mirrors, the final wavefront error of the collimator was 0.07λ(λ=633 nm), which is the diffraction limit.

• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.687-696
• /
• 2013

Background Ischemic preconditioning has been shown to improve the outcomes of hypoxic tolerance of the heart, brain, lung, liver, jejunum, skin, and muscle tissues. However, to date, no report of ischemic preconditioning on vascularized bone grafts has been published. Methods Sixteen rabbits were divided into four groups with ischemic times of 2, 6, 14, and 18 hours. Half of the rabbits in each group underwent ischemic preconditioning. The osteomyocutaneous flaps consisted of the tibia bone, from which the overlying muscle and skin were raised. The technique of ischemic preconditioning involved applying a vascular clamp to the pedicle for 3 cycles of 10 minutes each. The rabbits then underwent serial plain radiography and computed tomography imaging on the first, second, fourth, and sixth postoperative weeks. Following this, all of the rabbits were sacrificed and histological examinations were performed. Results The results showed that for clinical analysis of the skin flaps and bone grafts, the preconditioned groups showed better survivability. In the plain radiographs, except for two non-preconditioned rabbits with intraoperative ischemic times of 6 hours, all began to show early callus formation at the fourth week. The computed tomography findings showed more callus formation in the preconditioned groups for all of the ischemic times except for the 18- hour group. The histological findings correlated with the radiological findings. There was no statistical significance in the difference between the two groups. Conclusions In conclusion, ischemic preconditioning improved the survivability of skin flaps and increased callus formation during the healing process of vascularized bone grafts.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2014

PURPOSES: The objective of this study is to evaluate construction issues and design for transverse steel in continuously reinforced concrete pavement(CRCP). METHODS : The first continuously reinforced concrete pavement(CRCP) design procedure appeared in the 1972 edition of the "AASHTO Interim Guide for Design of Pavement Structures", which was published in 1981 with Chapter 3 "Guide for the Design of Rigid Pavement" revised. A theory that was accepted at that time for the analysis of steel stress in concrete pavement, called subgrade drag theory(SGDT), was utilized for the design of reinforcement of CRCP - tie bar design and transverse steel design - in the aforementioned AASHTO Interim Guide. However SGDT has severe limitations due to simple assumptions made in the development of the theory. As a result, any design procedures for reinforcement utilizing SGDT may have intrinsic flaws and limitations. In this paper, CRCP design procedure for transverse steel was introduced and the limitations of assumptions for SGDT were evaluated based on various field testing. RESULTS: Various field tests were conducted to evaluate whether the assumptions of SGDT are reasonable or not. Test results show that 1) temperature variations exist along the concrete slab depth, 2) very little stress in transverse steel, and 3) warping and curling in concrete slab from the field test results. As a result, it is clearly revealed out that the assumptions of SGDT are not valid, and transverse steel and tie bar designs should be based on more reasonable theories. CONCLUSIONS : Since longitudinal joint is provided at 4.1-m spacing in Korea, as long as joint saw-cut is made in accordance with specification requirements, the probability of full-depth longitudinal cracking is extremely small. Hence, for transverse steel, the design should be based on the premise that its function is to keep the longitudinal steel at the correct locations. If longitudinal steel can be placed at the correct locations within tolerance limits, transverse steel is no longer needed.

• Korean Journal of Veterinary Research
• /
• v.55 no.2
• /
• pp.81-88
• /
• 2015

This study was conducted to isolate lactic acid bacteria (LAB) from dog intestine and identify potential probiotic strains for canine use. One hundred and one LAB were isolated from feces of 20 healthy dogs. Acid, bile, and heat resistance along with adherence to Caco-2 cells and antimicrobial activity against pathogens were examined. To analyze immunomodulative effects, the production of nitric oxide (NO), TNF-${\alpha}$, and IL-$1{\beta}$ was measured using RAW 264.7 macrophages. Additionally, RAW BLUE cells were used to evaluate nuclear factor-${\kappa}B$ (NF-${\kappa}B$) generation. Ultimately, three strains were selected as canine probiotics and identified as Lactobacillus reuteri L10, Enterococcus faecium S33, and Bifidobacterium longum B3 by 16S rRNA sequence analysis. The L10 and S33 strains showed tolerance to pH 2.5 for 2 h, 1.0% Oxgall for 2 h, and $60^{\circ}C$ for 5 min. These strains also had strong antimicrobial activity against Escherichia coli KCTC 1682, Salmonella Enteritidis KCCM 12021, Staphylococcus aureus KCTC 1621, and Listeria monocytogenes KCTC 3569. All three strains exerted better immunomodulatory effects than Lactobacillus rhamnosus GG (LGG), a well-known commercial immunomodulatory strain, based on NO, NF-${\kappa}B$, IL-$1{\beta}$, and TNF-${\alpha}$ production. These results suggested that the three selected strains could serve as canine probiotics.

• Korean Journal of Clinical Laboratory Science
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2014

This research has been performed by our own investigation, also cooperated with Health and Sanification Division and each of district offices in Busan metropolitan city. After choosing, we collected water samples five times for microbiological examination. As a result of investigating in 160 water samples from urban areas, we could detect 88 cases of Vibrio spp. Furthermore, there were four cases exceeding the acceptable limit of aquarium water (100,00/mL) and another four cases exceeding the limit of Coliform group (1,000 below/100 mL). As a result of investigating that we performed for 271 cases of water samples from coastal areas from April to November, we could detect 130 cases of vibrio species and 10 cases of Coliform group. After performing 17 kinds of antibiotic susceptibility test for 41 cases of isolated Vibrio parahaemolyticus, 27 cases showed tolerance to Amplicllin (AM), all of 31 cases showed intermediate resistance only to Cefazolin (CF) but had sensitivity to the rest of them. As a result of performing antibiotic susceptibility test, serum test and PFGE gene analysis on each 10 pair of Vibrio parahaemolyticus detected concurrently from intake-pipe water and, aquarium water, we couldn't get data showing that they are clearly same species in three kinds of test. In addition, UV sterilization, Ozonization and so on. Based on our research, intake pipe didn't have a problem with microbiological contamination so we are sure that the germ came from supplied fish had caused that kind of contamination. For effective management, UV sterilization or Ozonization which can be handled consistently should be adopted in aquarium.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.91-100
• /
• 2015

The present study was conducted to screen candidate probiotic strains for anti-inflammatory activity. Initially, a nitric oxide (NO) assay was used to test selected candidate probiotic strains for anti-inflammatory activity in cultures of the murine macrophage cell line, RAW 264.7. Then, the in vitro probiotic properties of the strains, including bile tolerance, acid resistance, and growth in skim milk media, were investigated. We also performed an in vitro hydrophobicity test and an intestinal adhesion assay using Caenorhabditis elegans as a surrogate in vivo model. From our screening, we obtained 4 probiotic candidate lactic acid bacteria (LAB) strains based on their anti-inflammatory activity in lipopolysaccharide (LPS)-stimulated RAW 264.7 cell cultures and the results of the in vitro and in vivo probiotic property assessments. Molecular characterization using 16S rDNA sequencing analysis identified the 4 LAB strains as Lactobacillus plantarum. The selected L. plantarum strains (CAU1054, CAU1055, CAU1064, and CAU1106) were found to possess desirable in vitro and in vivo probiotic properties, and these strains are good candidates for further investigations in animal models and human clinical studies to elucidate the mechanisms underlying their anti-inflammatory activities.

• Tuberculosis and Respiratory Diseases
• /
• v.76 no.6
• /
• pp.269-275
• /
• 2014

Background: The six-minute walk test has been widely used in people with chronic cardiopulmonary disorders as an outcome assessment with regards to therapeutic or prognostic determinants. This study was undertaken to determine the six-minute walk distance (6MWD) in a sample of healthy Koreans and to create a reference equation. We also compared the 6MWD of our cohort with previously published equations. Methods: Two hundred fifty-nine healthy subjects (95 males) aged 22-59 years performed two walking tests using a standardized protocol. 6MWD was defined as the greatest distance achieved from the two tests. The effect of anthropometrics on the 6MWD was also investigated. Results: The average 6MWD was $598.5{\pm}57.92m$, with significantly longer distances by males ($628.9{\pm}59.51m$) than females ($580.9{\pm}47.80m$) (p<0.001). Age, height, weight, and body mass index were significantly correlated with 6MWD in univariate analysis. Stepwise multiple regression showed height to be single independent predictor of 6MWD ($r^2$=0.205, p<0.001). The reference equations derived in Caucasian and North African populations tend to overestimate the distance walked by Korean subjects, while Asian equations underestimate it. Conclusion: The average 6MWD in these Korean populations was 600 m. The regression equation revealed that individual's height was the most significant predictor of distance, explaining 20.5% of the distance variance.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.465-475
• /
• 2013

Higher quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. Usually, the quality level is measured by process capability indices. The index is used to determine whether a production process is capable of producing items within a specified tolerance. Some useful process capability indices $C_p$, $C_{pk}$ and $C_{pm}$ have been widely used in six sigma industries to assess process performance. Most evaluations on process capability indices focus on point estimates, which may result in unreliable assessments of process performance. It is necessary to investigate their asymptotic correlationship among process capability indices $\hat{C}_p$, $\hat{C}_{pk}$ and $\hat{C}_{pm}$. In this paper, we study their asymptotic correlationship for some process capability indices $\hat{C}_p$, $\hat{C}_{pk}$ and $\hat{C}_{pm}$ under the normal process.