• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.549-555
• /
• 2008

Analytical method to analyze the tolerance effect on the vehicle ride comfort is suggested in this paper. Ride comfort is one of the most important performance indices which decide the vehicle design quality. In general, the ride comfort is affected by the variations of parameters of a vehicle model. Therefore, the effects of the parameters on the ride comfort need to be evaluated statistically based on the whole-body vibration of the vehicle. In this paper, weighted RMS values of the acceleration PSD of a seat position are used to define the ride comfort. The equations of motion and the sensitivity equations are derived based on a 5-DOF vehicle model. By employing the sensitivity information of the acceleration at the seat position, the tolerance effect on the vehicle ride comfort could be effectively analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2157-2165
• /
• 2006

In implementing GCRA, well known as the representative user traffic policing algorithm for constant-bit rate service, it is essential to set proper values for delay variation tolerance in order to prevent network overload and excessive user data loss due to delay variation incurred inevitably during transmission process. In this paper, we investigate the performance of GCRA algorithm for various values of delay variation tolerance and suggest a guideline for setting proper delay variation tolerance values.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.2
• /
• pp.95-104
• /
• 2018

The purpose of this study is to investigate the impact of narcissism on employees' social media addiction and how it influences their job satisfaction and organizational commitment. And this study explores if perceived organizational support can moderate the relationship between narcissism and social media addiction. For this, this study collected data from 285 employees in Korean companies through a survey method and uses SPSS 18.0 for hierarchical regression analysis in the hypothesis test. First, organizational politics increases mood modification, withdrawal and tolerance among the sub-factors of social media addiction. Second, each phenomena of social media service addiction such as salience, withdrawal and tolerance decrease each relevant factors of job satisfaction and organizational commitment. Third, withdrawal and tolerance among the sub-factors of social media addiction play the mediating roles between narcissism and each relevant factors of job satisfaction/organizational commitment. Finally, perceived organizational support decrease the effect of narcissism on mood modification, withdrawal and tolerance among the sub-factors of social media addiction. This study provides some of managerial implications to corporate executives who try to manage organizational attitudes.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.231-238
• /
• 2000

The distributed digital control system has many shared common components, and a single fault in the system may have effects on not a single function. Not as in an analog system, the faults in a digital system usually make discrete and abrupt changes in its output, which are hard to be expected. To cope with these situations, the fault-tolerance is an inevitable property of a distributed control system. A distributed digital control system consists of many equipments, and each equipment can be implemented by many different technologies. The fault-tolerance has to be implemented depend-ing on the overall architecture and how each equipment is implemented. The paper analyzes and compares the strategies and tactics to add the fault-tolerances in a distributed digital control system, and studies how they can be combined appropriately.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.6 no.1
• /
• pp.21-29
• /
• 1998

The purpose of the present paper is to determine the time required and error tolerance limits for flight data computation. The results of statistical analysis showed that the calculator side computation required about 50 seconds for each question and wind side computation needed about 115 seconds for each question. In case of error tolerance limits, it was found that the error tolerance limit for altitude computation war 90 feet and two knots of interval was recommanded for the speed computation in calculator side, and one degree of interval for heading computation and five knots interval for speed computation in wind side.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.67-77
• /
• 2002

This paper introduces the calibration results of the fatigue crack growth models for damage tolerance analysis of the aircraft structures. Generalized Willenborg model and Wheeler model are calibrated with experimental data tested under the load spectrum of a trainer. The retardation factors such as, shut-off ratio in Generalized Willenborg model and shaping exponent in Wheeler model, are evaluated for aluminum alloys AL2024-T3511, AL7050-T7451 and AL7075-T73511. It is shown that the retardation effect of the crack growth rate depends on the yield strength of material and the maximum stress in the load spectrum. Generalized Willenborg model and Wheeler model give satisfactory prediction of crack growth life but the calibration of the experimental parameters with test is required.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.549-552
• /
• 1996

The tolerance approach to the sensitivity analysis in linear programming considers simultaneous and independent variations in the coefficients of the objective funciton or of the right-hand side terms and gives a region in which the coefficients and terms and gives a region in which the coefficients and terms can be changed and still the current optimal basis B for the original problem remains as an optimal basis for the perturbed problem. In this paper we describe a procedure that expands a region S obtained by the tolerance approch into a larger region R, so that more variations in the objective function coefficients or the right-hand side terms are permissible.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.2
• /
• pp.35-47
• /
• 1996

The tolerance approach to the sensitivity analysis in linear programming considers simultaneous and independent variations in the coefficients of the objective function or of the right-hand side terms and gives a region in which the coefficients and terms can be changed and still keeps the current optimal basis B for the original problem as an optimal basis for the perturbed problem. In this paper we describe a procedure that expands the region S obtained by the tolerance approach into a larger region R, so that more variations in the objective function coefficients or the right-hand side terms are permissible.

• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.78-95
• /
• 1993

The art of designing and analyzing fault-tolerant computers is surveyed with special emphasis on problems of analyzing the behavior of computers that have autonomous repair capability. The survey covers the following topics : (1) general issues in computer reliability, (2) fault-tolerance state relations and requirements, (3) computational hierarchy, (4) fault characteristics, (5) fault diagnosis, (6) fault-tolerance schemes for logic network and machines, (7) fault-coverage effects, and (8) fault-tree analysis of coverage. This paper does not include techniques for verifying nonredundant hardware or system software designs or for verifying the correctness of application programs.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the mediating effect of female university students' perception of dating violence on the dating violence victims behavior. A questionnaire was distributed and collected to a total of 161 female students enrolled in four departments of U University. Frequency and percentage, correlation analysis, simple regression analysis, and hierarchical multiple regression analysis were performed, and the Sobel test was performed to verify the significance of the indirect effects. Findings First, it was found that female university students' perception of dating violence had a negative effect on the behavior of victims of dating violence, and the explanation power was 5%. Second, violence tolerance was found to have a positive effect on the behavior of all dating violence victims, and the explanatory power was 12%. Third, in the first stage, female university students' perception of dating violence significantly explained the tolerance of violence. In step 2, perception of dating violence significantly explained the behavior of dating violence victims, and in step 3, the tolerance of violence explained the behavior of victims of dating violence. When violence tolerance was introduced in step 4, the influence of dating violence perception on the victimization behavior of dating violence decreased, but it was not significant. That is, violence tolerance showed a partial mediating effect in the effect of dating violence perception on dating violence victim behavior. It is necessary to develop and implement practical programs that can raise perception of violence and lower the tolerance for violence to prevent victims of dating violence.