• Wind and Structures
• /
• v.23 no.6
• /
• pp.559-575
• /
• 2016

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.23-46
• /
• 2020

In the current work, a series of three-dimensional finite element analyses have been carried out to understand the behaviour of pre-existing single piles to adjacent tunnelling by considering the tunnel face pressures and the relative location of pile tips with respect to the tunnel. The numerical modelling has analysed the effect of the face pressures on the pile behaviour. The analyses concentrate on the ground settlements, the pile head settlements, the axial pile forces and the shear stress transfer mechanism at the pile-soil interface. The head settlements of the pile (the vertical distance between the pile and the tunnel: 0.25D, where D is the tunnel diameter) directly above the tunnel crown with the face pressure 50% of the in-situ horizontal soil stress at the tunnel springline decreased by about 38% compared to corresponding settlements with a face pressure 25% of the in-situ horizontal soil stress at the tunnel springline. Furthermore, it was found that the smaller the face pressure, the larger the tunnelling-induced ground movements and the axial pile forces were and the higher the degree of the shear strength mobilisation at the pile-soil interface. When the piles were outside the tunnel influence zone, compressive pile forces were developed due to tunnelling. It has been found that the ground settlements and the pile settlements are heavily affected by the face pressures and the position of the pile tip relative to the tunnel. In addition, the computed results have been compared with relevant studies previously reported in literature. The behaviour of the piles has been extensively examined and analysed by considering the key features in great detail.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.159-164
• /
• 1984

The present studies were conducted to evaluate the sterilizing efficiency of the thermal processes for the canned sea-mussel products, such as canned boiled sea-mussel in brine (packed into No. 1 flat can) and canned smoked sea-mussel in oil (packed into No. 3B square can), with the purpose of deciding the adequacy of the processes. Heat penetration was tested three times with three cans at a time for each canned product. The tip of the applicator was fixed on the position a little below the geometrical center of the can. The test cans were placed in the middle layer of the basket in which the same canned products were loaded with, and the test cans were arranged to the front, the middle and the rear in the retort. The heat penetration curve of the canned boiled sea-mussel in brine showed a broken logarithmic heating curve while that of the canned smoked sea-mussel in oil showed a simple logarithmic heating curve. The calculated $F_0$ value for the canned boiled sea-mussel in brine was 25.33 and the canned smoked sea-mussel in oil was 13.84. Additionally, the nomographs represents the relationship between $F_0$ values and B values(process time including $42\%$ of come-up time) for the canned sea-mussel products were constructed.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1439-1448
• /
• 2005

In this paper, after similarity of color information in above toro and geometry position analysis of important characteristic information in face and abstraction object that is inputted detects face area using comparison, describe about method to do user certification using ratio information and hair spring degree. Face abstraction algorithm that use color information has comparative advantages than face abstraction algorithm that use form information because have advantage that is not influenced facial degree or site etc. that tip. Because is based on color information, change of lighting or to keep correct performance because is sensitive about color such as background similar to complexion is difficult. Therefore, can be used more efficiently than method to use color information as that detect characteristic information of eye and lips etc. that is facial importance characteristic element except color information and similarity for each object achieves comparison. This paper proposes system that eye and mouth's similarity that calculate characteristic that is ratio red of each individual after divide face by each individual and is segmentalized giving weight in specification calculation recognize user confirming similarity through search. Could experiment method to propose and know that the awareness rate through analysis with the wave rises.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.72-79
• /
• 2014

Cleft lip and palate(CLP) is one of the most common craniofacial deformities that requires systemic management involving a multidisciplinary team approach. Although there has been great improvement in the field of cleft surgery, surgical approach alone cannot resolve the various problems in treating cleft lip and palate. Hence the need for presurgical treatment was appreciated and especially, the concept of presurgical nasoalveolar molding was applied to treat unilateral and bilateral cleft lip and palate patients. Presurgical nasoalveolar molding(PNAM) of unilateral cleft mainly aims to recover nasal symmetry while the objectives of pre-surgical nasoalveolar molding in the bilateral cleft are to elongate the columella, to erect the tip of nose, and to reposition the forward displaced premaxillary region. This report covers the case of fraternal twins diagnosed with bilateral cleft. Retraction of the premaxillary region and nasoalveolar molding were conducted for 70 days until cheiloplasty, using elastic bands and nasoalveolar molding appliances. After cheiloplasty, there had been improvements in the length of columella and the position of forward-displaced premaxilla for both patients compared to their initial states. The esthetics was also satisfactory for both the surgery and the parents. In order to maximize the efficacy of the appliance, three components should be in balance; patients' adaptation to the appliance, parents' cooperation and proper selection and careful adjustment of the appliance by the dentist.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.53-62
• /
• 2017

The forced convection heat transfer performance of a twist-vane spacer grid for a dual-cooled annular fuel assembly was examined experimentally. The twist-vane spacer grid was uniquely designed to enhance mixing inside subchannels and mixing between adjacent subchannels. For testing, a $4{\times}4$ square-arrayed rod bundle with narrow gaps between rods was prepared as the dual-cooled annular fuel assembly to be simulated. The pitch-to-rod diameter ratio of simulated dual-cooled annular fuel assembly was 1.08. The experiments were performed under the following conditions: axial bulk velocity, 1.5 m/s and heat flux, $26kW/m^2$. With regard to the circumferential temperature distribution, the lowest rod-wall temperatures upstream and downstream were measured at the subchannel center and the position toward the tip of twist-vane, respectively. With regard to the axial temperature distribution, behind the twist-vane spacer grid, the rod-wall temperature decreased drastically, and the Nusselt number was enhanced by up to 56 %. The present measured data indicate that the twist-vane spacer grid can effectively improve the forced convection heat transfer in the dual-cooled annular fuel assembly with narrow gaps.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.91-105
• /
• 2015

In the current work, a series of three-dimensional (3D) finite element analyses have been performed to study the effects of the locations of pile tips on the behaviour of single piles to adjacent tunnelling. In the numerical modelling, several key issues, such as tunnelling-induced pile head settlements, axial pile forces, interface shear stresses and apparent factors of safety have been studied. When the pile tips are inside the influence zone which considers the relative pile tip location with respect to the tunnel position, tunnelling-induced pile head settlements are larger than those computed from the greenfield condition. However, when the pile tips were outside the influence zone, an opposite trend was observed. When the pile tips were inside the influence zone, tunnelling-induced tensile pile forces developed; however, when the pile tips were outside the influence zone, tunnelling-induced compressive pile forces were mobilised, associated with larger settlements of the surrounding soil than the pile settlements. It has been shown that the increases in the tunnelling-induced pile head settlements have resulted in reductions of the apparent factor of safety by about 50% when the pile tips are inside the influence zone, therefore severly affecting the serviceability of piles. The pile behaviour, when considering the location of pile tips with regards to the influence zone, has been analysed in great detail by taking the tunnelling-induced pile head settlements, axial pile force and apparent factor of safety into account.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.207-212
• /
• 2006

Background: The epidural injection technique is a commonly used intervention in the management of chronic spinal pain, which has the advantage of delivering various drugs, such as local anesthetics or steroids, in higher concentrations to the inflamed nerve root. A guidewire-reinforced epidural catheter was introduced through a Tuohy needle during the caudal epidural procedure, with a catheter threaded into the affected nerve roots and the spread-pattern of contrast agents observed under fluoroscopy. Methods: Sixty-seven patients with low back pain, who showed evidence of a herniated nucleus pulposus on magnetic resonance imaging, were included. All patients received fluoroscopically guided caudal epidural injections, with the guidewire-reinforced epidural catheter introduced through a Tuohy needle and threaded either to the right or left side toward the target nerve roots. After confirming the catheter tip position at the affected nerve root, 2 ml increments of contrast agents (up to 6 ml) were injected, and their corresponding AP fluoroscopic views were obtained. Three radiologists reviewed all the radiographic findings and measured the proportion of the area of contrast spread at the side of target nerve roots. Results: Greater proportion of the area of contrast spread was observed at the side of the target nerve roots (P < 0.0001). At each level of contrast injection (2-⁣, 4- ⁣ and 6 ml), more than 70% of the spread of contrast dye was observed at the side of the target nerve roots in 85%, 70%, and 55% of cases, respectively. Conclusions: The combination of a caudal epidural injection and use of a guidewire-reinforced epidural catheter significantly enhances the target specificity, as revealed by the selective spread of contrast dye at the side of target nerves.

• Journal of Life Science
• /
• v.25 no.1
• /
• pp.37-43
• /
• 2015

We have investigated the effects of the ethylene precursor 1-aminocyclopropane-1-carboxylic acid (ACC), indole-3-acetic acid (IAA) and methyl jasmonate (MeJA) on the development of aerenchyma in the primary root of maize (Zea mays). Because plant hormones affected the longitudinal organization of the primary root, we need an indicator to direct the positions for comparison between control and hormone-treated roots. Therefore, the zones of the maize primary root were categorized as PR25, PR50 and PR75, where each value indicates the relative position between the root tip (PR0) and the base (PR100). Aerenchyma was not observed at PR25 and PR50 and rarely found at PR75 in the cortex of control roots. The aerenchymal area at PR75 increased in the presence of the ethylene precursor ACC or a natural auxin IAA. On the other hand, MeJA differentially acted on non-submerged and submerged roots. Exogenously applied MeJA suppressed the aerenchyma formation in non-submerged roots. When the primary root was submerged, aerenchymal area expanded prominently. The submergence-induced aerenchyma formation was amplified with MeJA. Lateral root primordia have been known to inhibit aerenchymal death of surrounding cells. All the three hormones stimulating aerenchyma formation as described above did not restore the inhibition caused by lateral root primordia, suggesting that the inhibitory step regulated by lateral root primordia can be located after hormonal signaling steps.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.1129-1139
• /
• 2010

Objectives : The purpose of this study was to examine the toothbrushing practice behavior of preschool children by observing children's actual toothbrushing behavior and further to offer basic data available for being reflected in direction and goal establishment of the systematic and organized oral health education in consideration of individual characteristic. Methods : It targeted 225 preschool children from May 6, 2010 to June 8, and analyzed by having the survey results of totally 208 people, except 17 who are noncooperative with the observation survey. As for the collected materials, it carried out frequency analysis and $x^2$-test in order to grasp subjects' general characteristics and toothbrushing practice behaviors and to examine correlation, by using SPSS 12.0 for window. Results : 1. A grasp of toothbrush was indicated 47.1% for "proper" and 52.9% for "improper." The position of holding a toothbrush was indicated to be the highest with 59.6% for "the center in grip." 2. Toothpaste amount was indicated to be 49.0% for" tip in toothbrush, "followed by 38.9% for "half in toothbrush" and 12% for "every side of toothbrush" in order. Significant difference was shown according to age($x^2$=19.125. p<.05). 3. Average toothbrushing time per once was surveyed to be $106{\pm}56$ seconds. 4. As for a toothbrushing method by region, the labial and the baccal surface were indicated to be horizontal scrub with 63% and fones method 11.5%. Significant difference was shown according to gender($x^2$=10.275. p<.05). The anterior lingual surface wasn't washed with 72.6%. Significant difference was shown according to appearance of education($x^2$=6.056. p<.05). 5. A case of requiring exchange because of being widened toothbrush was indicated to be 59.2%. The toothbrush replacement in the highest ratio was needed in kindergarten teachers. Conclusions : The actual toothbrushing practice attitude of preschool children was surveyed to be not right as a whole such as toothbrushing time, toothbrushing method, toothpaste amount, and replacement of toothbrush. Accordingly, the oral health education will need to be performed in order for a change into positive attitude and for improvement in practice level. In addition, it is considered to be likely necessary for development in substantial oral health educational program available for enhancing knowledge level of oral health care in mothers and kindergarten teachers.