• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.101-116
• /
• 2002

Modern vehicles require a high degree of refinement, including good driveability to meet customer demands. Vehicle driveability, which becomes a key decisive factor for marketability, is affected by many parameters such as engine control and the dynamic characteristics in drive lines. Therefore, Engine and drive train characteristics should be considered to achieve a well balanced vehicle response simultaneously. This paper describes analysis procedures using a mathematical model which has been developed to simulate spark timing control logic. Inertia mass moment, stiffness and damping coefficient of engine and drive train were simulated to analyze the effect of parameters which were related vehicle dynamic behavior. Inertia mass moment of engine and stiffness of drive line were shown key factors for the shuffle characteristics. It was found that torque increase rate, torque reduction rate and torque recovery timing and rate influenced the shuffle characteristics at the tip-in condition for the given system in this study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.903-906
• /
• 2005

The purpose of this paper is to investigate free vibrations and critical loads of the uniform Beck's columns with a tip spring, carrying a tip mass. The ordinary differential equation governing free vibrations of such Beck's column subjected to a follower force is derived based on the Bernoulli-Euler beam theory. Both the divergence and flutter critical loads are calculated from the load-frequency curves that are obtained by solving the differential equation numerically. The critical loads are presented in the figures as functions of various non-dimensional system parameters such as the mass moment of inertia and spring parameter.

• 한국가스학회지
• /
• 제14권2호
• /
• pp.47-52
• /
• 2010

최근에 공압 제어 시스템에서 정압기를 장착하여 에너지를 절감하는 연구가 진행되고 있다. 정압기는 내부적으로 매우 복잡하기 때문에 유체력 손실에 영향을 끼친다. 따라서 정압기 설계 시, 유체역학적 접근을 통한 설계 변수의 도출은 매우 중요하다. 본 연구에서는 상용 CFD 패키지인 FLUENT를 사용하여 정압기 내에서 팁의 크기, 팁의 위치, 그리고 유량이 유체력 손실에 끼치는 영향을 살펴보았다. t/T 비가 0.8이상일 때, 유체력 손실을 증가시키지 않으면서 목표 감압을 이룰 수 있었고, 위치의 영향은 크지 않음을 알 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.571-580
• /
• 2015

In this paper, a computational study was conducted in order to investigate the rotor blade sweep effect on the aerodynamics of a small axial supersonic impulse turbine stage. For this purpose, three-dimensional unsteady RANS simulations have been performed with three different rotor blade sweep angles ($-15^{\circ}$, $0^{\circ}$, $+15^{\circ}$) and the results were compared with each other. Both NTG (No tip gap) and WTG (With tip gap) models were applied to examine the effect on tip leakage flow. As a result of the simulation, the positive sweep model ($+15^{\circ}$) showed better performance in relative flow angle, Mach number distribution, entropy rise, and tip leakage mass flow rate compared with no sweep model. With the blade static pressure distribution result, the positive sweep model showed that hub and tip loading was increased and midspan loading was reduced compared with no sweep model while the negative sweep model ($-15^{\circ}$) showed the opposite result. The positive sweep model also showed a good aerodynamic performance around the hub region compared with other models. Overall, the positive sweep angle enhanced the turbine efficiency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.560-561
• /
• 2010

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.477-483
• /
• 2015

본 논문에서는 Euler-Bernoulli Beam(EB-beam) 및 신속 Fourier 변환을 이용하여 수치분석적 빔 모델 및 Co-rotational plane beam EDISON program(CR-beam)을 이용한 빔 모델의 가진주파수 변화에 따른 외팔보의 자유단 진동 연구를 수행하였다. 위의 두 빔 모델에서의 끝단에서는 진동이 시간이 지남에 따라 감소하다가 정상상태에 이르는 것을 확인하였다. 끝단에서 가진주파수가 증가함에 따라 구조적 감쇠에 의해 변위이 감소하는 경향을 보인다. 감쇠를 고려한 EB-beam과 CR-beam가 정상상태로 진입하는 경향이 비슷하나, 가진주파수는 정상상태가 나타나는 시간과 독립적임을 제시한다.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1287-1294
• /
• 2005

이 논문은 자유단이 스프링으로 지지되고 자유단 집중질량을 갖는 Beck 기둥의 안정성 해석에 관한 연구이다. Bernoulli-Euler보 이론을 이용하여 경사종동력을 받는 Beck 기둥의 자유진동을 지배하는 미분방정식과 경계조건을 유도하였다. 이 미분방정식을 수치해석하여 하중-고유진동수 곡선을 얻고 이로부터 발산임계하중 및 동요임계하중을 산출하였다. 수치해석의 결과로부터 경사변수, 집중질량 및 스프링 강성이 임계하중에 미치는 영향을 고찰하였다.

• 한국강구조학회 논문집
• /
• 제17권6호통권79호
• /
• pp.699-705
• /
• 2005

이 논문은 자유단에 집중질량을 갖고 종동력이 작용하는 변단면 캔틸레버 기둥의 임계하중에 관한 연구이다. 기둥의 단면을 중실 직사각형 단면을 갖는 선형 변단면으로 채택하고, Bernoulli-Euler 보 이론에 의한 자유단 집중질량을 갖고 종동력을 받는 소위 Beck 기둥의 자유진동을 지배하는 미분방정식을 유도하였다. 이 미분방정식을 수치해석하여 하중-고유진동수 곡선을 얻고 이로부터 발산임계하중 및 동요임계하중을 산출하였다. 수치해석의 결과로부터 변단면 형태, 경사변수 및 질량비가 임계하중에 미치는 영향을 고찰하였다.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.727-736
• /
• 2016

Numerical simulations of n-heptane spray characteristics in a constant volume combustion chamber under diesel engine like conditions with increasing ambient gas density ($14.8-142kg/m^3$) and ambient temperature (800-1000 K) respectively were performed to understand the non-vaporizing and vaporizing spray behavior. The effect of fuel temperature (ranging 273-313 K) on spray characteristics was also simulated. In this simulation, spray modeling was implemented into ANSYS FORTE where the initial spray conditions at the nozzle exit and droplet breakups were determined through nozzle flow model and Kelvin-Helmholtz/Rayleigh-Taylor (KH-RT) model. Simulation results were compared with experimentally obtained spray tip penetration result to examine the accuracy. In case of non-vaporizing condition, simulation results show that with an increment of the magnitude of ambient gas density and pressure, the vapor penetration length, liquid penetration length and droplet mass decreases. On the other hand vapor penetration, liquid penetration and droplet mass increases with the increase of ambient temperature at the vaporizing condition. In case of lower injection pressure, vapor tip penetration and droplet mass are increased with a reduction in fuel temperature under the low ambient temperature and pressure.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.167-188
• /
• 2008

This study is concerned with the establishment of the characteristic equation of a combined system consisting of a cantilever beam with a tip mass and an in-span visco-elastic helical spring-mass, considering the mass of the helical spring. After obtaining the "exact" characteristic equation of the combined system, by making use of a boundary value problem formulation, the characteristic equation is established via a transfer matrix method, as well. Further, the characteristic equation of a reduced system is obtained as a special case. Then, the characteristic equations are numerically solved for various combinations of the physical parameters. Further, comparison of the results with the massless spring case and the case in which the spring mass is partially considered, reveals the fact that neglecting or considering the mass of the spring partially can cause considerable errors for some combinations of the physical parameters of the system.