• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1334-1338
• /
• 2006

In this work, indium tin oxide (ITO) thin film was fabricated by indium-tin-organic sol including ITO nanoparticle. ITO nanoparticle showed ultrafine size about 5 nm and (222) preferred crystal structure. Also, ITO sol-gel thin film showed good optical transmittance over 83% and electrical resistance less than $7\;{\times}\;10^3\;{\Omega}$.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1999-2003
• /
• 2014

Indium tin oxide ($In_2Sn_{1-x}O_{5-y}$) nanoparticles were synthesized by hydrothermal method from stable indium tin acetylacetone complexes and postannealing at $600^{\circ}C$. The absence of chlorine ions shortened the synthesis process, decreased the particle agglomeration and improved the particle purity. The introduced complexing ligand acetylacetone decreased the obtained nanoparticle size. The improved powder properties accelerated the sintering of the $In_2Sn_{1-x}O_{5-y}$ nanoparticles and reached a relative density of 96.4% when pressureless sintered at $1400^{\circ}C$.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.414-417
• /
• 2011

Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.467-470
• /
• 2007

Ultrafine Indium tin oxide (ITO) nanoparticle was successfully fabricated by low temperature synthetic method (LTSM). Mean size of ITO nanoparticle is 5 nm, and uniformly dispersed with (222) orientated cubic structure. Using the nanoparticle, ITO thin film with good optical and electrical properties was fabricated by inkjet printing.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.171-173
• /
• 2016

본 연구에서는 휴대용 온열기의 에너지 효율을 향상시키기 위하여 indium tin oxide (ITO) 나노입자 페이스트와 PDMS를 이용하여 PDMS/ITO 나노입자 박막 면상발열체를 제작하였고, ITO 나노입자 박막 면상발열체와 PDMS/ITO 나노입자 면상발열체의 온도 유지특성 및 소비전력량을 분석하였다. PDMS층의 낮은 열전도도로 PDMS/ITO 나노입자 박막 면상발열체의 온도유지시간이 ITO 나노입자 박막 면상발열체에 비해 1.5배 증가하였으며, 소비 전력량은 35% 절감되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.185-186
• /
• 2009

• 센서학회지
• /
• 제31권2호
• /
• pp.85-89
• /
• 2022

We investigated a pH sensor using an Indium tin oxide (ITO) nanoparticle (NP) film printed on a flexible substrate. First, the printing precision and mechanical stability of the ITO-printed film were investigated. In particular, the factors that influence the crystallinity of ITO films were studied using X-ray diffraction pattern analysis. The response of the ITO pH sensor was calibrated using a series of standard pH solutions (pH 3-11). The pH values of various specimens were measured using an ITO pH sensor, and the results were compared with those of various pH measurement methods. As a result of the experiment, the maximum error was approximately ± 0.04 pH (0.4 %) at pH 9, which indicated that the ITO pH sensor is highly suitable for pH measurement. Finally, we used the ITO pH sensor to the measure of general specimens such as solvents and beverages and compared the results in comparison with those obtained from several conventional methods.

• 한국레이저가공학회지
• /
• 제17권1호
• /
• pp.13-16
• /
• 2014

Indium Tin Oxide (ITO) has been used widely for transparent conducting thin films. In this work, the feasibility of a laser sintering process to fabricate ITO thin films on flexible substrates is examined. Nanoparticles of ~10 nm were spin coated on a Si wafer and then sintered by a KrF excimer laser. The sintered structure was characterized by scanning electron microscopy. Polycrystalline structures were fabricated by the process without thermally damaging the substrate. The electrical resistivity of the film was reduced to ~ 1/1000 of the initial value. This work demonstrates that nanosecond laser sintering of ITO particles can be a useful tool to fabricate ITO films on various flexible substrates.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.91-94
• /
• 2017

AThe effect of localized surface plasmon on silicon substrates was studied using silver nanoparticles. The nanoparticles were formed by self-arrangement through the surface energy using rapid thermal annealing (RTA) technique after the thin nanolayer of silver was deposited by thermal evaporation. By the theoretical calculation based on Mie scattering and dielectric function of air, indium tin oxide (ITO), and silver, the strong peak of scattering cross section of silver nanoparticles was found at 358 nm for air, and 460 nm for ITO, respectively. Accordingly, the strong suppression of reflectance under the condition of induced light of $30^{\circ}$ occurred at the specific wavelength which is almost in accordance with peak of scattering cross section. When the external quantum efficiency was measured using silicon solar cells with silver nanoparticles, there was small enhancement peak near the 460 nm wavelength in which the light was resonated between silver nanoparticles and ITO.

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1345-1350
• /
• 2020

Stable dispersion of antimony-doped tin oxide nano-powder was prepared by wet attrition process by comminuting aggregated ATO nano-powder using the titanate coupling agent as a dispersant to form the chemisorbed layer on the particle surface. The feed solution of the ATO dispersion and PVP was prepared for electro-spun fibers on the glass substrate. The surface resistance of the fibrous ATO film after electrospinning for 30 minutes was in the order of 10⁵ Ω/□, which is sufficient for anti-static coating. The optical transmittance of ATO fibers was confirmed by measuring the visible light transmittance.