• 제목/요약/키워드: time-off-light

검색결과 169건 처리시간 0.025초

장파장에서 동작하는 Optical Thyristor (Optical thyristor operating at 1.55 μm)

  • 김두근;김형수;정성재;최영완;이석;우덕하;전영민;유병길
    • 한국광학회지
    • /
    • 제13권2호
    • /
    • pp.146-150
    • /
    • 2002
  • 본 연구에서는 광통신 시스템에 응용할 수 있는 장파장용 광 싸이리스터(optcal thyristor)를 제안하고, 소자를 제작하여 그 특성을 측정 분석하였다. 발광과 수광의 기능을 수행하는 광 싸이리스터는 광 네트워크 구성의 핵심 소자로서 충분한 스위칭 전압이 요구되는데, 단일 광 싸이리스터에서 충분한 스위칭 전압 4.03(V)와 홀딩 전압(holding voltage) 1.77(V)를 얻었다. 또한 입력 전류에 따른 수광에 필요한 충분한 광량을 얻을 수 있었고, 입사 광에 따른 비선형 I-V특성의 변화량을 확인 할 수 있었다. 실험적으로 얻어진 장파장용 DOT의 비선형적 특성은 일정한 진폭을 유지 시켜주는 광 하드 리미터(optical hard-limiter), ATM패킷 헤더 프로세싱을 위한 광 ATM 패킷 스위cld, 파장 분할 다중화(WDM) 광전송 시스템에서 파장 라우팅을 위한 파장 변환기 등의 많은 광통신 용용 분야에 적용할 수 있다.

시료 채취 조건 및 검사방법에 따른 지하수내 섬유상 물질 검출 양상에 관한 연구 (Effect of Sampling and Analytical Methods on the Fibrous Materials from the Ground Water)

  • 김지용;김정란;정해관;임현술;백남원
    • 한국산업보건학회지
    • /
    • 제7권2호
    • /
    • pp.209-222
    • /
    • 1997
  • Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

  • PDF

여뀌과 이형경식물의 Dinorphism과 Bisexuality의 변화 (STUDIES ON THE DIMORPHISM AND TRANSITION OF BISEXUALITY OF HETEROSTYLOUS POLYGONACEAE)

  • Harn, Chang-Yawl
    • Journal of Plant Biology
    • /
    • 제3권2호
    • /
    • pp.6-18
    • /
    • 1960
  • The present experiments were designed in order to clarify the differences between the long and short styled plants and the transgressive gradition in the degree of dimorphism among the three heterostylous species of the Polygonus, P. japonica, F. esculentum, and P. senticosa, based on investigations regarding the floral structure, ecological and physiological traits, the results of which are summarized as follows: (1) P. japonica, although it exhibits typical dimorphism, has undergone so high a differentiation between long and short styled that its long styled individuals behave as if they were female; and short styled individuals as if male. In long-styled individuals, filament, anther, and pollen grains show signs of degeneration, most of the pollen being abortive. On the other hand, in short styled individuals, the filament, anther, and pollen grains have attained remarkable development; the pollen grians are large and fertile. In short-plant the fertilized flowers readily drop off in every stage of their embryo development. This species has completely lost the self-fertile property, which is characteristic of the non-dimorphic Polygonum genus. Although this specsei typically exhibits the physiological characteristics of the non-dimorphic Polygonum genus. Although this specisei typically exhibits the physiological characteristics of dimorphism in controlled pollination, the short-styled individuals bear no seed in nature, thus misleading taxonomists to idenfity the short-styled plant as male. 2) The morphological feature of the flower organ of P. senticosa obviously indicates definite dimorphism. Physiologically, however, no differentiation towards dimorphism was observed, the species still retaining, both in long and short-individuals, the self-fertile property common to the Polygonum genus. Elaborate examinations revealed that regardless of the modes of pollination, both fertiization and seed setting flourish, no differentiation betwen legitimate and illegitimate unions being recognizable. This sort of physiological property has not been observed in the investigations of other heterostylous plants. It is assumed that this species is differentiated structurally into dimorphism, but not yet physiologically. In nature, however, this plant would have more opportunities to be cross-pollinated, i.e., legitimately combined, than self-pollinated because of the development of two forms of flowers. 3) In terms of heterostylism, the F. esculentum just occupies the intermediate position between P. japonica and P. senticosa structurally, ecologically, and physiologically. Doescription of some of the physiological behavior of the plant will suffice to demonstrate the above facts. While P. japonica has completely lost its self-fertile property, P. senticosa still retains it wolly. In F. esculentum 2-6% of self-fertility is the result in illegitimate combination. There occur occasionally hereditary self fertile individuals among some of the F. or 20 min. irradiation plot, when they reach any stage of the same bacterial population. In addition to this increase of total population in the plots with the more dose of UV light irradiation, it seems that the more dose of UV light irradiation is the more shortened the generation time of Azotobacter. Therefore, it is clear that variation of reproductive rate must be, mere or less, due to the genetic effects induced by UV light irradiation. On the other hand, the lag phase or logarithmic growth phase in nonirradiated culture is shortened prominently, and this must be due to the difference in bacterial number of the original inoculm. The generation time of Azotobacter is shortened by exogeneous treatment of nuclei acid derivatives, and the degree is greater in case of DNA derivatives than RNA dervatives. W.H. Price reported that the rate of ribose nucleic acid to protein in Staphylococcus muscae is proportional to the generation time: that is the faster the cell can form ribose nucleic acid, the more rapid its growth. This explains the shortening of generation time by exogeneous RNA derivatives in this work reasonably. On the other hand, it is well known that the desoxyribose nuclic acid content per cell is constant and independent of the generation time. A.D. Laren and W.N. Takahashi reported that the infectious RNA from TMV is 6 times as sensitive to inactivation by UV as it is in the form of intact virus, and that inactivation of infectious TMV involves onlu a local change on RNA chain. But, the effect of exogeneous DNA in this work suggests that irradiated living cell which cotain DNA bring about some change on DNA moleculs as well as RNA molecules. And if the mutagenic effects of UV take into consideration, it is very reasonable. Therefore, it is clear that the variation of the generation time by UV irradiation is, more or less, due to the genetic effects. Therefore, it seems that the shortness of the average lifewpan of Azotobacter by UV irradiation is resulted not only from the influence of the environmental conditions, but also from the variation of genetic factor of the individual.

  • PDF

The Estimated Evacuation Time for the Emergency Planning Zone of the Kori Nuclear Site, with a Focus on the Precautionary Action Zone

  • Lee, Janghee;Jeong, Jae Jun;Shin, Wonki;Song, Eunyoung;Cho, Cheolwoo
    • Journal of Radiation Protection and Research
    • /
    • 제41권3호
    • /
    • pp.196-205
    • /
    • 2016
  • Background: The emergency planning zone (EPZ) of the city of Busan is divided into the precautionary actions zone (PAZ) and the urgent protective action planning zone; which have a 5-km radius and a 20-km to 21-km radius from the nuclear power plant site, respectively. In this study, we assumed that a severe accident occurred at Shin-Kori nuclear unit 3 and evaluated the dispersion speed of radiological material at each distance at various wind speeds, and estimated the effective dose equivalent and the evacuation time of PAZ residents with the goal of supporting off-site emergency action planning for the nuclear site. Materials and Methods: The total effective dose equivalent, which shows the effect of released radioactive materials on the residents, was evaluated using the RASCAL 4.2 program. In addition, a survey of 1,036 residents was performed using a standardized questionnaire, and the resident evacuation time according to road and distance was analyzed using the VISSIM 6.0 program. Results and Discussion: According to the results obtained using the VISSIM and RASCAL programs, it would take approximately 80 to 252.2 minutes for permanent residents to move out of the PAZ boundary, 40 to 197.2 minutes for students, 60 to 232.2 minutes for the infirm, such as elderly people and those in a nursing home or hospital, and 30 to 182.2 minutes for those temporarily within the area. Consequently, in the event of any delay in the evacuation, it is estimated that the residents would be exposed to up to $10mSv{\cdot}h^{-1}$ of radiation at the Exclusion Area Boundaries (EAB) boundary and $4-6mSv{\cdot}h^{-1}$ at the PAZ boundary. Conclusion: It was shown that the evacuation time for the residents is adequate in light of the time lapse from the initial moment of a severe accident to the radiation release. However, in order to minimize the evacuation time, it is necessary to maintain a system of close collaboration to avoid traffic congestion and spontaneous evacuation attempts.

전자포탈영상을 이용한 기하학적 정도관리 실시간 분석 프로그램의 개발 (Development of Geometrical Quality Control Real-time Analysis Program using an Electronic Portal Imaging)

  • 이상록;정경용;장민선;이병구;권영호
    • 대한방사선치료학회지
    • /
    • 제24권2호
    • /
    • pp.77-84
    • /
    • 2012
  • 목 적: 필름평가방법을 대신하여 전자포탈영상을 이용한 기하학적 정도관리 실시간 분석 프로그램을 개발하고자 한다. 대상 및 방법: 전자포탈영상장치(Electronic Portal Image Device, EPID)가 선형가속기(CL-iX, Varian, USA)의 하부에 고정된 구조 때문에 발생되는 문제를 해결한 후 Eclipse treatment planning system (Version 8.1, Varian, USA)으로 기하학적 정도관리 항목을 생성하였다. 치료실의 4DTC (Version 10.2, Varian, USA)에서 전자포탈영상(single exposure before plan)을 생성하고 항목별로 빔을 조사하였다. Off-line review에서 전자포탈영상을 획득하고 이를 자체 개발한 기하학적 정도관리 실시간 분석 프로그램으로 평가하였다. 평가 방법으로 치료 중 오차(Intra-fraction error)는 모든 절차를 같은 날에 동일 조건으로 5회 연속 실시하여 분석하였고 치료 간 오차(Inter-fraction error)의 확인을 위해 모든 절차를 동일 조건에서 10일간 실시한 후 Iso-align$^{TM}$ quality control device를 이용한 필름평가방법과 비교하였다. 측정 및 분석 시간은 장치의 셋업에서 데이터 획득까지의 시간과 이후 분석완료까지 소요된 시간으로 구분하여 측정한 후 사용자와 수행과정의 편의성도 비교하였다. 결 과: 빛-방사선조사면 일치, 콜리메이터 회전축, 환자테이블 회전축, 갠트리 회전축 항목에서 각각 평균 0.1, 0.2, 0.3, 0.2 mm의 치료 중 오차 값을 확인하였다. 10일간의 연속된 정도관리를 통해 치료 간 오차를 확인한 결과 항목별로 각각 평균 1.7, 1.4, 0.7, 1.1 mm의 오차 값을 얻었다. 그리고 측정 시간은 필름평가방법과 전자포탈영상을 이용한 방법에서 각각 평균 36분, 15분이 걸렸고 분석 시간은 평균 30분, 22분이 소요되었다. 결 론: 전자포탈영상을 이용하여 기하학적 정도관리를 실시할 경우 정도관리 도구로서 유용함을 알 수 있었다. 필름 미사용에 따른 비용 절감의 이점뿐만 아니라 측정 및 분석 시간도 줄일 수 있어 사용자 편의성이 커지고 필름 현상 과정 등의 생략으로 수행과정도 개선할 수 있었다. 또 자체 개발한 기하학적 정도관리 실시간 분석 프로그램으로 평가가 완료된 영상은 데이터화가 가능하여 자료의 보관이 용이해진다.

  • PDF

류마티스 관절염 환자의 수면 및 관련 요인에 관한 연구 (A Study on Sleep in Rheumatoid Arthritis Patients)

  • 김금순;유경희
    • 기본간호학회지
    • /
    • 제6권2호
    • /
    • pp.198-210
    • /
    • 1999
  • This study is to investigate sleep patterns of rheumatoid arthritis patients through a survey research. The subjects for this study were 97 patients registered in Hanyang University Hospital Rheumatoid Arthritis Center, and the period of data collection was from July 15, 1998 to August 30, 1998. The research instruments used in this study were the measures of sleep, pain, and fatigue, and SPSSWIN 8.0 Program was used for data analysis. The research results are as follows ; The patients went to bed between 11 and 12 p.m., but many of them found difficulty in falling asleep within 5 minutes. They woke up quite early at around 4 to 6 o'clock in the morning and remained in bed about 1 hour. Only 39 percent of the subjects reported satisfaction with their sleep. Fifty six percent of the subjects took a nap, generally did in the afternoon and 22.7 percent of them napped for half an hour. They suffered sleep disturbance, but their sleep environments were calm and comfortable, and they turn off the light when they went to sleep. As for the quality of sleep, over 50 percent of the subjects reported not being able to sleep deeply, 30 percent of the subjects woke up frequently during sleep, 60 percent experienced frequent arousal after sleep onset. Over 90 subjects slept for 6 to 8 hours. This shows that even though they had rheumatoid arthritis, the patients remained in bed for a sufficient period of time. They also reported waking up or turning frequently during sleep. The sense of fatigue from sleep disturbance scored a relatively high 35.84 points on average against the possible score of 64 points. Behavior for sleep promotion was very active. Sleep disturbance occurred in proportion to the sense of fatigue and pain, and was negatively correlated with quality of sleep. The pain had positive correlations with the illness duration, sleep disturbance and had a negative correlation with the quality of sleep.

  • PDF

집적화된 광 싸이리스터와 수직구조 레이저를 이용한 광 로직 AND/OR 게이트에 관한 연구 (Optical AND/OR gates based on monolithically integrated vertical cavity laser with depleted optical thyristor)

  • 최운경;김두근;김도균;최영완
    • 대한전자공학회논문지SD
    • /
    • 제43권12호
    • /
    • pp.40-46
    • /
    • 2006
  • 본 연구에서는 GaAs/AlGaAs 구조의 수직 구조 레이저 - 완전 공핍 광 싸이리스터를 제작하여, 광 논리 및 광 스위칭 시스템에 응용할 수 있는, 광 AND- 와 OR- 게이트를 구현하였고, 그 특성을 측정, 분석하였다. 제작된 단일 소자 타입의 광 싸이리스터는 하나의 소자에서 간단한 기준 스위칭 전압의 변화만으로 광 AND 와 OR 게기트를 모두 구현할 수 있다는 장점을 갖는다. 활성층 위, 아래에 1/4 파장 거울층 구조를 채택하고, 선택적 산화공법을 이용하여 0.65 mA의 낮은 문턱전류 값을 얻었고, 50dB 이상의 높은 온/오프 대비를 보였으며, 높은 광 출력 효율과 입력 광 신호에 대한 높은 선택도를 얻을 수 있었다. 제작된 광 싸이리스터는 실험적으로 S자형의 전류-전압 특성곡선을 얻었고, 빛의 세기가 증가함에 따라 스위칭 전압이 5.20V에서 1.90V로 현저히 줄어드는 것을 확인하였다

영상센서의 비균일 응답특성 보정을 위한 흑체 설계 및 성능검증과 보정오차 분석 (Black Body Design and Verification for Non-Uniformity Correction of Imaging Sensor and Uncertainty Analysis)

  • 신소민
    • 한국항공우주학회지
    • /
    • 제41권3호
    • /
    • pp.240-245
    • /
    • 2013
  • 영상센서 중 적외선 센서는 시간경과 및 작동/비작동 반복에 따라 적외선 광원에 대한 응답특성이 조금씩 변화하며, 그 결과 영상품질이 저하된다. 그래서 인공위성에 탑재되는 적외선 센서의 경우 정상적인 임무수행을 위해 교정용 흑체로 주기적인 비균일 응답특성 보정을 실시할 수 있도록 해야 한다. 본 논문에서는 비균일 응답특성 보정을 위해, 적외선 센서의 파장대역 $3.3{\sim}5.2{\mu}m$에서 흑체 방사율이 0.995이상 평균온도차 $1^{\circ}C$ 이하가 되도록 V-그루브(groove) 타입의 흑체를 설계하였다. 성능검증을 위해 흑체의 방사율과 표면온도를 측정하여 검증하였으며, 그 결과로부터 비균일 응답특성 보정오차를 산출하였다.

배기관에서의 합성가스 연소에 따른 배기가스 온도 및 농도 변화에 관한 실험적 연구 (An Experimental Study on Variations of Exhaust Gas Temperature and Concentration with Synthetic Gas Combustion in Exhaust Manifold)

  • 조용석;이성욱;양승일;송춘섭;박영준
    • 한국자동차공학회논문집
    • /
    • 제16권4호
    • /
    • pp.56-62
    • /
    • 2008
  • A synthetic gas reformed from hydrocarbon-based fuels consists of $H_2$, CO and $N_2$. Hydrogen contained in the synthetic gas is a very useful species in chemical processes, due to its wide flammability range and fast burning speed. The ESGI (Exhaust Synthetic Gas Injection) technology is developed to shorten the light-off time of three way catalysts through combustion of the synthetic gas in the exhaust manifold during the cold start period of SI engines. Before the ESGI technology is applied to the test engine, the authors set a test rig that consists of gas temperature and composition controllers, an exhaust pulse generator and an exhaust manifold with a visualization window, in order to optimize the point and conditions of injection of the synthetic gas. Through measuring burned gas temperatures and taking photographs of synthetic gas combustion at the outlet of the exhaust manifold, the authors tried to find the optimal injection point and conditions. Analysis of burned gas composition has been performed for various $O_2$ concentrations. As a result, when the synthetic gas is injected at the port outlet of the cylinder No. 4 and $O_2$ concentration exceeds 4%, combustion of the synthetic gas is strong and effective in the exhaust manifold.

Effect of a SiO2 Anti-reflection Layer on the Optoelectronic Properties of Germanium Metal-semiconductor-metal Photodetectors

  • Zumuukhorol, Munkhsaikhan;Khurelbaatar, Zagarzusem;Kim, Jong-Hee;Shim, Kyu-Hwan;Lee, Sung-Nam;Leem, See-Jong;Choi, Chel-Jong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권4호
    • /
    • pp.483-491
    • /
    • 2017
  • The interdigitated germanium (Ge) meta-lsemiconductor-metal (MSM) photodetectors (PDs) with and without an $SiO_2$ anti-reflection (AR) layer was fabricated, and the effect of $SiO_2$ AR layer on their optoelectronic response properties were investigated in detail. The lowest reflectance of 15.6% at the wavelength of 1550 nm was obtained with a $SiO_2$ AR layer with a thickness of 260 nm, which was in a good agreement with theoretically calculated film thickness for minimizing the reflection of Ge surface. The Ge MSM PD with 260 nm-thick $SiO_2$ AR layer exhibited enhanced device performance with the maximum values of responsivity of 0.65 A/W, the quantum efficiency of 52.2%, and the detectivity of $2.49{\times}10^9cm\;Hz^{0.5}W^{-1}$ under the light illumination with a wavelength of 1550 nm. Moreover, time-dependent switching analysis of Ge MSM PD with 260 nm- thick $SiO_2$ AR layer showed highest on/off ratio with excellent stability and reproducibility. All this investigation implies that 260 nm-thick $SiO_2$ AR layer, which is effective in the reduction in the reflection of Ge surface, has a great potential for Ge based optoelectronic devices.