• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.391-397
• /
• 2005

Since space time block code (STBC) technique of a transmission diversity technique was introduced, multiple input multiple output techniques using transmission diversity at the basestation for improving transmission data rate, have been studied extensively. Multiplexed STBC OFDM technique uses multiple groups of two transmit antennas and suppresses the interference signals of other STBC OFDM groups at the receivers. In this paper, I propose a new method of iterative decoding and maximal ratio receive combining technique for multiplexed STBC OFDM systems, and simulated and showed the results in comparison with the conventional methods.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.136-141
• /
• 2016

This paper proposes an alternate time-switched multiplexed space-time block coding technique for orthogonal frequency division modulation systems. The traditional multiplexed space-time block coding technique can provide more data rate owing to multiple transmit and receive technique, which causes a lot of hardware burden. Alternate time-switched scheme of transmitting time-domain zeros can reduce this hardware burden by half with time-domain switches only. Simulation results show that alternate time-switched scheme has almost same performance with half of baseband and RF modules in comparison with a multiplexed space-time block coding for orthogonal frequency division modulation systems with twice repetitive transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1554-1559
• /
• 2000

On ATM networks, MPEG video stream is transferred using CBR or VBR services. But because the MPEG video traffic varies greatly from time to time, it is very difficult to transfer the MPEG steam efficiently without loss of transmission bandwidth. Until now, the study on the traffic analysis and control on a single MPEG video stream has been done by many researchers, but the traffic analysis and control on a multiplexed traffic of multiple MPEG video streams has not been studied by any researcher. This paper proposes a multiplexing method to reduce the PCR and traffic variance of a multiplexed traffic of multiple MPEG video streams. By reducing the PCR of the multiplexed traffic, the multiplexed VBR traffic can be transferred efficiently with less loss of transmission bandwidth.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.99-106
• /
• 2008

To improve $B_1$ homogeneity in high field MRI, the RF power is applied to the transmit array coil elements sequentially in the time-multiplexed way. Since only a single coil element is activated in a time-multiplexing slot, the global standing wave formation in the human body is greatly suppressed. The time-multiplexing slot width is on the order of micro seconds, hence, high-order-harmonic slices can be placed far from the transmit coil and simultaneous multiple slice selection can be avoided. The $B_1$ homogeneities of a birdcage coil and an eight-channel transmit array coil have been compared through finite difference time domain simulations. The simulation results indicate that the proposed technique can reduce the peak-to-peak $B_1$ inhomogeneity down to one fourth of the transmission with a birdcage coil on the central plane of the human head model at 3 T. The mimicking experiments at 3 T, eight separate experiments with a single coil element activated and image reconstruction by combining the eight images, also show promising results. It is expected that the proposed technique has some advantages over other $B_1$ improving methods in real practice since simple RF switching circuitries are only necessary and electromagnetic coupling between the coil elements is out of concern in its realization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1999

This paper introduces orthogonally multiplexed modulation and demodulation methods based on Wavelet Packet Bases and particularly describes Wavelet Packet Modulation (WPM) techniques that provide the designer of transmission signal set in time-frequency domain with tree structural information which can be adapted to given channel characterristics. Multi-dimensional signaling methods are also contrasted to common and different characteristics of conventional QAM. multi-tone modulation methods. The paper addresses the mothod how to find a best tree structure that has more adaptivity to impulse and narrowband tone pulse noises using a tunning algorithm which arbitrarily partitions the time-frequency space and makes a suitable orthogonal signaling waveforms. Simulation results exhibits a favorable performance over existing mod/demod methods specially for narrowband tone pulse and impulse interferences.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.745-746
• /
• 2013

TWDM PON (time and wavelength division multiplexed passive optical network) uses multiple wavelengths to transmit packets upstream and downstream. In upstream transmission, if we use only one wavelength, the unused bandwidth is equally distributed to each ONU (optical network unit). In contrast, when multiple wavelengths are used, the unused remainders of wavelengths are different from each other. Therefore, it is difficult to fairly allocate the unused bandwidth to each ONU. This paper proposes a new method to allocate the unused bandwidth to each ONU in TWDM PON which uses multiple wavelengths.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.9-17
• /
• 2016

We demonstrate a time- and wavelength-division multiplexed passive optical network system employing a vertical-cavity surface-emitting laser array-based optical line terminal transceiver and a tunable bidirectional optical subassembly-based optical network terminal transceiver. A packet error-free operation is achieved after a 40 km single-mode fiber bidirectional transmission. We also discuss an arrayed waveguide grating, a photo detector array based on complementary metal-oxide-semiconductor photonics technologies, and low-cost key devices for deployment in access networks.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.151-156
• /
• 2023

We propose to implement cost-effectively a high-speed short-haul interconnect by transmitting a 200-Gb/s/λ two-channel optical time-division-multiplexed signal generated by a carrier-suppressed optical pulse, which improves the robustness of the multiplexed signal to chromatic dispersion. The multiplexed 200-Gb/s signal is generated in the transmitter by combining two 100-Gb/s 4-level pulse-amplitude-modulated signals (generated using the optical pulse and two Mach-Zehnder modulators). After the signal is transmitted over a fiber, it is amplified by a semiconductor optical amplifier and detected by a photodiode. The amplified spontaneous emission noise is eliminated by an optical band-pass filter. The transmitted signal is reconstructed by a 2 × 2 multiple-input multiple-output equalizer, which compensates for crosstalk. Due to the use of the carrier-suppressed optical pulse, the 200-Gb/s signal can be transmitted over fiber with a chromatic dispersion of 40 ps/nm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.536-538
• /
• 2011

Net residual dispersion (NRD) available to transmit 160 Gbps OPDM signal is induced in optical transmission links with dispersion management (DM) and optical phase conjugator (OPC) for compensating of chromatic dispersion and self phase modulation (SPM). It is confirmed that the perfect cancellation of accumulated dispersion is necessary to transmit 160 Gbps OTDM signal.